Article 3896M BitFenix Introduces Enso Case and Alchemy 3.0 Addressable RGB Magnetic LED Strips

BitFenix Introduces Enso Case and Alchemy 3.0 Addressable RGB Magnetic LED Strips

by
Joe Shields
from on (#3896M)

carousel_575px.jpg

Bitfenix has added a new mid-tower to its chassis lineup dubbed the Enso. The Enso comes with a metallic front and a tempered glass side panel to display the components inside. The front panel has integrated addressable RGB illumination in each corner which gives the case a unique look. Bitfenix has worked closely with ASUS and the AURA Sync software to ensure the case and the new Alchemy 3.0 RGB Magnetic LED strips can be synchronized using the AURA Sync software or using the pre-installed controller on the back of the case. The Enso supports motherboards from Mini-ITX to E-ATX (Up to 272mm) and supports radiators both in front and on the rear exhaust for increased compatibility.

3832_575px.png

3834_575px.png 3854_575px.png

The top of the case has locations for fan mounts and a mesh cover, or if none are used up top, users can place a solid panel on it for noise reduction and airflow. Dust filters on the Enso, two located on the front one on the bottom, slide out from the side instead of from the top or bottom allowing for easier access and maintenance. Outside of the tempered glass panel, the remainder are finished in a matte black. If a black case doesn't tickle your fancy, it also comes in white with tempered glass side panel as well.

Buy BitFenix Enso (White) on Newegg

The IO panel sits on the top of the case and includes two USB 3.0 ports, power and reset buttons, an RGB LED button, microphone and headphone jacks, as well as LEDs for power and drive activity. No support for USB 3.1 Type-C connectivity, however. Exterior measurements for the mid-tower case are (W)210mm x (H)489mm x (D)454mm (8.26 x 19.13 x 17.84-inches).

3840_575px.png 3843_575px.png

The Enso has a simple interior design without obstructions, like a drive cage, for example, to thwart airflow inside and keep noise levels down. Bitfenix mentions the intakes are hidden on the front panel and helps with the clean design aesthetic. Though the look is clean, It makes me wonder where the intakes are and how much airflow can really get in there compared to an open front style case. That aside, the power supply is separated from the rest of the case in its own chamber which will help hide the wires and improve airflow. The space will fit ATX and standard Power Supplies up to 160mm in length. It also gas pre-cutout grommets and 23mm of space behind the motherboard tray for cable management purposes.

3842_575px.png 3844_575px.png

As far as locations to mount storage, the Bitfenix has 3 2.5-inch bays and 2 3.5-inch bays (usable as 2.5-inch also) which is about par for the mid-tower sized course. There is support for 2x120/2x140mm fans in the front, 2x120mm up top, and 1x120mm on the rear. It comes with a 120mm fan from the front (black) and a 120mm fan in the rear (static RGB). The front of the case supports 2x120mm or 2x140mm sized radiators up to 35mm thickness while on the rear a 1x120mm size will fit. The maximum GPU length is 340mm(13.38-inches) which will nearly any on the market. The maximum height for a CPU heatsink is 160mm(6.29-inches) which will also fit some pretty tall units. As always, confirm the specifications for proper fitment.

Alchemy 3.0 Addressable RGB LEDs

The Alchemy 3.0 addressable LEDs are also a new edition to the lineup and offer more lighting options than non-addressable RGB LEDs.Using the AURA Sync software and a 3-pin addressable header, a nearly infinite amount of looks are possible. The new strips are magnetic and have a 3M adhesive strip to allow for easier installation and relocation on the metal panels. They use SK6812 TriBright SMD LEDs which are also found in their other products. The strips can be purchased with an optional controller that is pre-programmed with multiple single-color modes and three multi-color rainbow modes. Like the strips, it also has a magnet attached for easier mounting.

3928_575px.png

Pricing was not listed however the Enso Case in white is available at Newegg now for $80 while the Alchemy 3.0 strips I was unable to source online.

BitFenix Enso
ModelEnso
Case TypeATX Mid-Tower
Dimensions(W)210 x (H)489 x (D)454mm (8.26 x 19.13 x 17.84-inches)
ColorBlack or White
Body MaterialSteel, Plastic, Tempered Glass
Net Weight7kg(15.4lbs)
External Drive BaysNone
HDD/SSD Bays2 x 3.5" (or 2 x 2.5") and 2 x 2.5"
Expansion Slots7
Motherboard TypeMini-ITX, MicroATX, ATX, E-ATX (to 272mm)
System FanFront: 2 x 140mm or 2 x 120mm (1 x included - black)
Top: 2 x 120mm
Rear: 1 x 120mm (1 x included - static RGB)
I/O Ports2 x USB3.0
3.5" HD Audio/Mic
VGA Card Support340mm
CPU Cooling Support160mm
PSU SupportATX (to 160mm)
Radiator SupportFront: 1 x 240mm or 1 x 280mm (35mm thickness)
Rear: 1 x 120mm
Related Reading:
External Content
Source RSS or Atom Feed
Feed Location https://anandtech.com/rss/
Feed Title
Feed Link https://anandtech.com/
Reply 0 comments