Article 4JT35 GALAX Announces HOF Pro M.2 PCIe 4.0 x4 SSD: Up to 5 GB/s

GALAX Announces HOF Pro M.2 PCIe 4.0 x4 SSD: Up to 5 GB/s

by
Anton Shilov
from on (#4JT35)

HOFproM2_HB01_575px.jpg

GALAX has introduced its new flagship SSDs featuring a PCIe 4.0 x4 interface and sequential read performance of up to 5 GB/s. The new HOF Pro M.2 drives will demonstrate all of their advantages when installed inside systems based on AMD's Ryzen 3000-series processors as well as AMD's X570 based motherboards, as these are currently the only PCIe 4.0 compatible consumer hosts on the market.

Based on Phison's PS5016-E16 controller (8 NAND channels with 32 CE targets with up to 800 MT/s speeds, 4th Gen LDPC ECC engine, 28nm, etc.) and Toshiba's 3D TLC NAND memory, the GALAX Hall-of-Fame Pro SSDs are set to be available in 500 GB, 1 TB, and 2 TB capacities.

HOFproM2_1_575px.jpg

As far as sequential performance is concerned, the GALAX HOF Pro SSDs offer up to 5 GB/s read speeds as well as up to 4.4 GB/s write speeds, depending on the model and capacity. As for random performance, GALAX opted for firmware enabling up to 750K read IOPS as well as up to 700K write IOPS.

HOFproM2_2_575px.jpg

To ensure maximum performance, the GALAX HOF Pro SSDs are equipped with a large aluminum cooling system featuring a copper heat pipe. This cooling system naturally makes the drives incompatible with laptops, but since at present there are no notebooks based on AMD's X570 platform, this is hardly a substantial drawback. Another important aspect about the new SSD is its white PCB, which will be appreciated by modders with white components.

HOFproM2_3_575px.jpg

To make the GALAX HOF Pro drives more appealing to enthusiasts, the manufacturer supplies it with Xtreme Tuner software for SSDs. The application monitors temperature, endurance, and other information about the drives to enable higher performance and reliability.

Specifications of the GALAX HOF Pro SSDs
Model500 GB1 TB2 TB
Form FactorM.2 2280
InterfaceNVMe, PCIe 4.0 x4
ControllerPhison PS5016-E16
NAND FlashToshiba BiCS4 3D TLC
Capacities500 GB1 TB2 TB
Sequential Read (max)5000 MB/s4900 MB/s5000 MB/s
Sequential Write (max)2500 MB/s4400 MB/s
Random Read (max)up to 750K IOPS
Random Write (max)up to 700K IOPS
Warranty? years
Write Endurance???
TBW???
Release DateJuly 2019

The GALAX HOF Pro SSDs will be available in the coming weeks. Pricing will depend on the country, yet since we are talking about top-of-the-range drives, the cost will be likely accordingly high.

HOFproM2_4_575px.jpg

Related Reading:

Source: GALAX

External Content
Source RSS or Atom Feed
Feed Location https://anandtech.com/rss/
Feed Title
Feed Link https://anandtech.com/
Reply 0 comments