Kernel panic
by Crippled from LinuxQuestions.org on (#4WB6P)
I am experiencing random kernel panic incidences. I experienced the same thing with Xubuntu 18.04LTS since last Friday after an update causing boot issues. Saturday's update corrected the booting issues. On Sunday I switched over to using MX Linux 19 with the same kernel panics. The computer will lock up solid where noting works. I did notice a kernel panic message once which the desktop computer was narrowly able to display the split second before it locked up. This rules out a distro problem and points to a hardware problem. I even tried a newer kernel because I have experienced issues with any kernel before 4.20 on my AMD Ryzen 7. I tired to look at the log in Thunar but either it won't open or I get a kernel panic trying to open it. I also can't find anything to open it even though I open Thunar as root. Is "syslog" the correct folder to look at? Does anyone know how I can see the log files and if so how I do get to view them? Code:System: Host: xxxxx Kernel: 5.2.15-antix.1-amd64-smp x86_64 bits: 64 Desktop: Xfce 4.14.1
Distro: MX-19_x64 patito feo October 21 2019
Machine: Type: Desktop Mobo: ASUSTeK model: TUF X470-PLUS GAMING v: Rev X.0x
serial: <root required> UEFI: American Megatrends v: 4207 date: 12/08/2018
CPU: Topology: 8-Core model: AMD Ryzen 7 1700 bits: 64 type: MT MCP L2 cache: 4096 KiB
Speed: 1723 MHz min/max: 1550/3000 MHz Core speeds (MHz): 1: 1723 2: 1453 3: 1277
4: 1277 5: 3191 6: 3081 7: 1335 8: 1460 9: 1745 10: 2483 11: 1348 12: 1479 13: 3057
14: 2663 15: 2954 16: 1706
Graphics: Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series] driver: radeon v: kernel
Display: x11 server: X.Org 1.20.4 driver: radeon resolution: 1920x1080~60Hz
OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 5.2.15-antix.1-amd64-smp LLVM 7.0.1)
v: 3.3 Mesa 18.3.6
Audio: Device-1: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
driver: snd_hda_intel
Device-2: AMD Family 17h HD Audio driver: snd_hda_intel
Sound Server: ALSA v: k5.2.15-antix.1-amd64-smp
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 0c:9d:92:11:18:9b
IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Drives: Local Storage: total: 3.64 TiB used: 3.22 TiB (88.4%)
ID-1: /dev/sda vendor: Marvell model: Raid VD size: 3.64 TiB
Partition: ID-1: / size: 3.58 TiB used: 3.21 TiB (89.9%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 487.9 MiB used: 271.5 MiB (55.7%) fs: ext4 dev: /dev/sda2
ID-3: swap-1 size: 1.98 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-1
Sensors: System Temperatures: cpu: 36.8 C mobo: N/A gpu: radeon temp: 61 C
Fan Speeds (RPM): cpu: 0
Info: Processes: 360 Uptime: 31m Memory: 23.53 GiB used: 3.49 GiB (14.8%) Shell: bash
inxi: 3.0.36 Unfortunately GSmartControl can't scan the RAID 10 I have to see if there are any issues with it or not. :(
Distro: MX-19_x64 patito feo October 21 2019
Machine: Type: Desktop Mobo: ASUSTeK model: TUF X470-PLUS GAMING v: Rev X.0x
serial: <root required> UEFI: American Megatrends v: 4207 date: 12/08/2018
CPU: Topology: 8-Core model: AMD Ryzen 7 1700 bits: 64 type: MT MCP L2 cache: 4096 KiB
Speed: 1723 MHz min/max: 1550/3000 MHz Core speeds (MHz): 1: 1723 2: 1453 3: 1277
4: 1277 5: 3191 6: 3081 7: 1335 8: 1460 9: 1745 10: 2483 11: 1348 12: 1479 13: 3057
14: 2663 15: 2954 16: 1706
Graphics: Device-1: AMD Cedar [Radeon HD 5000/6000/7350/8350 Series] driver: radeon v: kernel
Display: x11 server: X.Org 1.20.4 driver: radeon resolution: 1920x1080~60Hz
OpenGL: renderer: AMD CEDAR (DRM 2.50.0 / 5.2.15-antix.1-amd64-smp LLVM 7.0.1)
v: 3.3 Mesa 18.3.6
Audio: Device-1: AMD Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
driver: snd_hda_intel
Device-2: AMD Family 17h HD Audio driver: snd_hda_intel
Sound Server: ALSA v: k5.2.15-antix.1-amd64-smp
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 0c:9d:92:11:18:9b
IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A
Drives: Local Storage: total: 3.64 TiB used: 3.22 TiB (88.4%)
ID-1: /dev/sda vendor: Marvell model: Raid VD size: 3.64 TiB
Partition: ID-1: / size: 3.58 TiB used: 3.21 TiB (89.9%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 487.9 MiB used: 271.5 MiB (55.7%) fs: ext4 dev: /dev/sda2
ID-3: swap-1 size: 1.98 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-1
Sensors: System Temperatures: cpu: 36.8 C mobo: N/A gpu: radeon temp: 61 C
Fan Speeds (RPM): cpu: 0
Info: Processes: 360 Uptime: 31m Memory: 23.53 GiB used: 3.49 GiB (14.8%) Shell: bash
inxi: 3.0.36 Unfortunately GSmartControl can't scan the RAID 10 I have to see if there are any issues with it or not. :(