TP-Link TL-WN822N(US) v5 USB Wi-Fi support in Slackware 14.2 x64 stable (multilib)
by sattvakarma from LinuxQuestions.org on (#4YNHH)
Hello forum members,
I am in the process of getting a desktop machine ready for dedicated Slackware use. The desktop PC only has Ethernet connector and no Wi-Fi, so i decided to shop for a Linux supported USB Wi-Fi card. I picked up a TP-Link TL-WN822N(US) v5 USB Wi-Fi adapter.
Now interestingly, this Linux supported TP-Link adapter is not working under my existing Slackware 14.2 stable (multilib) laptop with kernel 4.4.38. It is being detected though but no initialization. And the command output information is not very detailed.
Also, the device and the box say it is hardware version 5, but the info. from the commands below state it is version 4?
Any forum members who have faced a similar dilemma? Does this adapter work under Linux as advertised? Is there some workaround/configuration that needs to be done to get this working under Slackware?
Please find output from commands to probe the hardware listed below.
Code:dmesg
[ 1237.115113] usb 2-5: new high-speed USB device number 5 using ehci-pci
[ 1237.230153] usb 2-5: New USB device found, idVendor=2357, idProduct=0108
[ 1237.230161] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1237.230167] usb 2-5: Product: 802.11n NIC
[ 1237.230173] usb 2-5: Manufacturer: Realtek
[ 1237.230178] usb 2-5: SerialNumber: 00e04c000001Code:lsusb
Bus 002 Device 005: ID 2357:0108Code:lsusb -v -d 2357:0108
Bus 002 Device 005: ID 2357:0108
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2357
idProduct 0x0108
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n NIC
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 802.11n NIC
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 12
bNumDeviceCaps 1
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self PoweredI have the Knoppix 8.6 DVD handy which has kernel 5.2.5-64, so i decided to give that a try. Under Knoppix the card is getting detected and initialized. And, i am also able to see a lot more detailed information.
It shows up under the networks icon, BUT i am not able to connect to Wi-Fi networks. I am able to connect to the Wi-Fi network using the laptop inbuilt Atheros adapter.
I ran similar commands as above in Knoppix also.
Code:dmesg
[ 1289.313358] usb 2-5: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 1289.313361] usb 2-5: RTL8192EU MAC: d0:37:45:75:8c:69
[ 1289.313365] usb 2-5: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 1289.313511] usb 2-5: Firmware revision 19.0 (signature 0x92e1)
[ 1290.289895] usb 2-5: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 1290.322267] usb 2-5: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 1290.411267] usb 2-5: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 1290.443516] usb 2-5: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 1290.490408] systemd-udevd[4313]: Using default interface naming scheme 'v240'.Code:lsusb
Bus 002 Device 006: ID 2357:0108 TP-Link TL-WN822N Version 4 RTL8192EUCode:lsusb -v -d 2357:0108
Bus 002 Device 006: ID 2357:0108 TP-Link TL-WN822N Version 4 RTL8192EU
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2357 TP-Link
idProduct 0x0108 TL-WN822N Version 4 RTL8192EU
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n NIC
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0035
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 802.11n NIC
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x000c
bNumDeviceCaps 1
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self PoweredCode:hwinfo --wlan
28: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: +rmv.AXK_iG62sf1
Parent ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0
SysFS BusID: 2-5:1.0
Hardware Class: network
Model: "TP-Link TL-WN822N Version 4 RTL8192EU"
Hotplug: USB
Vendor: usb 0x2357 "TP-Link"
Device: usb 0x0108 "TL-WN822N Version 4 RTL8192EU"
Revision: "2.00"
Serial ID: "00e04c000001"
Driver: "rtl8xxxu"
Driver Modules: "rtl8xxxu"
Device File: wlan1
Features: WLAN
Speed: 480 Mbps
HW Address: ca:3d:aa:96:fe:33
Permanent HW Address: d0:37:45:75:8c:69
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v2357p0108d0200dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: rtl8xxxu is active
Driver Activation Cmd: "modprobe rtl8xxxu"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #36 (Hub)After an unsuccessful attempt at connecting to a Wi-Fi network, when i run dmesg, i see the following:
Code:dmesg
[ 1625.318734] wlan1: authenticate with 30:45:96:a9:76:19
[ 1625.341663] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1625.543713] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1625.750401] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1625.953725] wlan1: authentication with 30:45:96:a9:76:19 timed out
[ 1627.348420] wlan1: authenticate with 30:45:96:a9:76:19
[ 1627.371553] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1627.573716] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1627.780398] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1627.987080] wlan1: authentication with 30:45:96:a9:76:19 timed out
[ 1629.761698] wlan1: authenticate with 30:45:96:a9:76:19
[ 1629.785403] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1629.987047] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1630.193739] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1630.397058] wlan1: authentication with 30:45:96:a9:76:19 timed out
[ 1632.691748] wlan1: authenticate with 30:45:96:a9:76:19
[ 1632.715022] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1632.917043] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1633.123741] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1633.330404] wlan1: authentication with 30:45:96:a9:76:19 timed out
[ 1643.615845] wlan1: authenticate with 30:45:96:a9:76:19
[ 1643.627520] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1643.830406] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1644.033692] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1644.237045] wlan1: authentication with 30:45:96:a9:76:19 timed outSo at this moment, i do not know what seems to be the problem. Or how to get this working under Slackware.
Any assistance will be appreciated!
Thank you for your time and regards.
Sattva
P.s: If i cannot get this USB adapter to work under Slackware, i will return the product within the next 7 days and start searching for another adapter that does work.
I am in the process of getting a desktop machine ready for dedicated Slackware use. The desktop PC only has Ethernet connector and no Wi-Fi, so i decided to shop for a Linux supported USB Wi-Fi card. I picked up a TP-Link TL-WN822N(US) v5 USB Wi-Fi adapter.
Now interestingly, this Linux supported TP-Link adapter is not working under my existing Slackware 14.2 stable (multilib) laptop with kernel 4.4.38. It is being detected though but no initialization. And the command output information is not very detailed.
Also, the device and the box say it is hardware version 5, but the info. from the commands below state it is version 4?
Any forum members who have faced a similar dilemma? Does this adapter work under Linux as advertised? Is there some workaround/configuration that needs to be done to get this working under Slackware?
Please find output from commands to probe the hardware listed below.
Code:dmesg
[ 1237.115113] usb 2-5: new high-speed USB device number 5 using ehci-pci
[ 1237.230153] usb 2-5: New USB device found, idVendor=2357, idProduct=0108
[ 1237.230161] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1237.230167] usb 2-5: Product: 802.11n NIC
[ 1237.230173] usb 2-5: Manufacturer: Realtek
[ 1237.230178] usb 2-5: SerialNumber: 00e04c000001Code:lsusb
Bus 002 Device 005: ID 2357:0108Code:lsusb -v -d 2357:0108
Bus 002 Device 005: ID 2357:0108
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2357
idProduct 0x0108
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n NIC
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 53
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 802.11n NIC
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 12
bNumDeviceCaps 1
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self PoweredI have the Knoppix 8.6 DVD handy which has kernel 5.2.5-64, so i decided to give that a try. Under Knoppix the card is getting detected and initialized. And, i am also able to see a lot more detailed information.
It shows up under the networks icon, BUT i am not able to connect to Wi-Fi networks. I am able to connect to the Wi-Fi network using the laptop inbuilt Atheros adapter.
I ran similar commands as above in Knoppix also.
Code:dmesg
[ 1289.313358] usb 2-5: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[ 1289.313361] usb 2-5: RTL8192EU MAC: d0:37:45:75:8c:69
[ 1289.313365] usb 2-5: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[ 1289.313511] usb 2-5: Firmware revision 19.0 (signature 0x92e1)
[ 1290.289895] usb 2-5: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 1290.322267] usb 2-5: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 1290.411267] usb 2-5: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 1290.443516] usb 2-5: rtl8192eu_rx_iqk_path_b: Path B RX IQK failed!
[ 1290.490408] systemd-udevd[4313]: Using default interface naming scheme 'v240'.Code:lsusb
Bus 002 Device 006: ID 2357:0108 TP-Link TL-WN822N Version 4 RTL8192EUCode:lsusb -v -d 2357:0108
Bus 002 Device 006: ID 2357:0108 TP-Link TL-WN822N Version 4 RTL8192EU
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2357 TP-Link
idProduct 0x0108 TL-WN822N Version 4 RTL8192EU
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n NIC
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0035
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 802.11n NIC
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 EP 6 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 3
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x08 EP 8 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x000c
bNumDeviceCaps 1
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self PoweredCode:hwinfo --wlan
28: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: +rmv.AXK_iG62sf1
Parent ID: pBe4.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0
SysFS BusID: 2-5:1.0
Hardware Class: network
Model: "TP-Link TL-WN822N Version 4 RTL8192EU"
Hotplug: USB
Vendor: usb 0x2357 "TP-Link"
Device: usb 0x0108 "TL-WN822N Version 4 RTL8192EU"
Revision: "2.00"
Serial ID: "00e04c000001"
Driver: "rtl8xxxu"
Driver Modules: "rtl8xxxu"
Device File: wlan1
Features: WLAN
Speed: 480 Mbps
HW Address: ca:3d:aa:96:fe:33
Permanent HW Address: d0:37:45:75:8c:69
Link detected: no
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "usb:v2357p0108d0200dc00dsc00dp00icFFiscFFipFFin00"
Driver Info #0:
Driver Status: rtl8xxxu is active
Driver Activation Cmd: "modprobe rtl8xxxu"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #36 (Hub)After an unsuccessful attempt at connecting to a Wi-Fi network, when i run dmesg, i see the following:
Code:dmesg
[ 1625.318734] wlan1: authenticate with 30:45:96:a9:76:19
[ 1625.341663] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1625.543713] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1625.750401] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1625.953725] wlan1: authentication with 30:45:96:a9:76:19 timed out
[ 1627.348420] wlan1: authenticate with 30:45:96:a9:76:19
[ 1627.371553] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1627.573716] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1627.780398] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1627.987080] wlan1: authentication with 30:45:96:a9:76:19 timed out
[ 1629.761698] wlan1: authenticate with 30:45:96:a9:76:19
[ 1629.785403] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1629.987047] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1630.193739] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1630.397058] wlan1: authentication with 30:45:96:a9:76:19 timed out
[ 1632.691748] wlan1: authenticate with 30:45:96:a9:76:19
[ 1632.715022] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1632.917043] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1633.123741] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1633.330404] wlan1: authentication with 30:45:96:a9:76:19 timed out
[ 1643.615845] wlan1: authenticate with 30:45:96:a9:76:19
[ 1643.627520] wlan1: send auth to 30:45:96:a9:76:19 (try 1/3)
[ 1643.830406] wlan1: send auth to 30:45:96:a9:76:19 (try 2/3)
[ 1644.033692] wlan1: send auth to 30:45:96:a9:76:19 (try 3/3)
[ 1644.237045] wlan1: authentication with 30:45:96:a9:76:19 timed outSo at this moment, i do not know what seems to be the problem. Or how to get this working under Slackware.
Any assistance will be appreciated!
Thank you for your time and regards.
Sattva
P.s: If i cannot get this USB adapter to work under Slackware, i will return the product within the next 7 days and start searching for another adapter that does work.