Docker container setup with wrong IP

My coworkers setup a docket container with the an IP schema that is used on my network. They've performed so much work on this VM. Is there a way to fix the IP issue without have to start the entire project from scratch? Here are details:

Code:# ifconfig
br-b8296ba1c148: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.18.0.1 netmask 255.255.0.0 broadcast 0.0.0.0
inet6 fe80::42:61ff:fe63:b9b2 prefixlen 64 scopeid 0x20<link>
ether 02:42:61:63:b9:b2 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 10.0.0.5 netmask 255.255.255.0 broadcast 0.0.0.0
ether 02:42:a0:34:fc:28 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

ens192: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.17.4.160 netmask 255.255.255.128 broadcast 172.17.4.255
inet6 fe80::250:56ff:fea2:7ba2 prefixlen 64 scopeid 0x20<link>
ether 00:50:56:a2:7b:a2 txqueuelen 1000 (Ethernet)
RX packets 85844634 bytes 31995987401 (29.7 GiB)
RX errors 0 dropped 2473 overruns 0 frame 0
TX packets 86980369 bytes 31407651471 (29.2 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 636 bytes 54838 (53.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 636 bytes 54838 (53.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

veth8450103: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::bca4:bbff:fea8:8eea prefixlen 64 scopeid 0x20<link>
ether be:a4:bb:a8:8e:ea txqueuelen 0 (Ethernet)
RX packets 678430 bytes 221475286 (211.2 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 636629 bytes 170305085 (162.4 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

vethd6f804d: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::c812:b3ff:fe56:6625 prefixlen 64 scopeid 0x20<link>
ether ca:12:b3:56:66:25 txqueuelen 0 (Ethernet)
RX packets 244660 bytes 77508284 (73.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 174164 bytes 171261451 (163.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0The problem is the IP address shown above 172.18.0.1 is used in our production network. Is there a way to fix this without having to restart the entire project from the beginning?

Here are more details:

Code:[root@ ~]# docker network ls
NETWORK ID NAME DRIVER SCOPE
0533fe2b7580 bridge bridge local
ce116ed2a25c host host local
48e74b162938 none null local
b8296ba1c148 symmetricds_default bridge localThanks in advance.