e1000e: probe failed with error -2
by AsgAnquietas from LinuxQuestions.org on (#5CE4P)
Hello all,
I was wondering if someone could help me with an odd problem...
I have a Lenovo ThinkCentre M92P Desktop PC, which has an Intel Onboard LAN Card that doesn't want to initialize and I don't know what the hell is the problem with it...
I'll post some of my configs:
lspci:
Code:infosky [~] # lspci |grep Etherne
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)lshw:
Code:infosky [~] # lshw -c network
*-network UNCLAIMED
description: Ethernet controller
product: 82579LM Gigabit Network Connection (Lewisville)
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm msi cap_list
configuration: latency=0
resources: memory:f7e00000-f7e1ffff memory:f7e35000-f7e35fff ioport:f080(size=32)dmesg:
Code:infosky [~] # dmesg |grep e1000
[ 0.678546] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.680549] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.688720] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.951961] e1000e: probe of 0000:00:19.0 failed with error -2uname -a:
Code:Linux infosky 5.4.0-59-generic #65-Ubuntu SMP Thu Dec 10 12:01:51 UTC 2020 x86_64 x86_64 x86_64 GNU/LinuxUbuntu version:
Code:Ubuntu 20.04.1 LTSIn BIOS, the Oboard LAN is enabled and LAN Booting is Disabled.
All updates are already performed.
System up-to-date. LAN Card not recognized by driver, I assume.
Something has to do with that "probe of 0000:00:19.0 failed with error -2" which I don't know what it means.
I was thinking about installing Intel's drivers from their website but this seems a little too much to do.
The drivers should be naturally integrated in the kernel.
If I install manual drivers, then this means that everytime I get a kernel update I must manually reinstall drivers ? This sucks...
If anyone can lend a helping hand, it would be very appreciated... :-)
Thanks !
I was wondering if someone could help me with an odd problem...
I have a Lenovo ThinkCentre M92P Desktop PC, which has an Intel Onboard LAN Card that doesn't want to initialize and I don't know what the hell is the problem with it...
I'll post some of my configs:
lspci:
Code:infosky [~] # lspci |grep Etherne
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)lshw:
Code:infosky [~] # lshw -c network
*-network UNCLAIMED
description: Ethernet controller
product: 82579LM Gigabit Network Connection (Lewisville)
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm msi cap_list
configuration: latency=0
resources: memory:f7e00000-f7e1ffff memory:f7e35000-f7e35fff ioport:f080(size=32)dmesg:
Code:infosky [~] # dmesg |grep e1000
[ 0.678546] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.680549] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.688720] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.951961] e1000e: probe of 0000:00:19.0 failed with error -2uname -a:
Code:Linux infosky 5.4.0-59-generic #65-Ubuntu SMP Thu Dec 10 12:01:51 UTC 2020 x86_64 x86_64 x86_64 GNU/LinuxUbuntu version:
Code:Ubuntu 20.04.1 LTSIn BIOS, the Oboard LAN is enabled and LAN Booting is Disabled.
All updates are already performed.
System up-to-date. LAN Card not recognized by driver, I assume.
Something has to do with that "probe of 0000:00:19.0 failed with error -2" which I don't know what it means.
I was thinking about installing Intel's drivers from their website but this seems a little too much to do.
The drivers should be naturally integrated in the kernel.
If I install manual drivers, then this means that everytime I get a kernel update I must manually reinstall drivers ? This sucks...
If anyone can lend a helping hand, it would be very appreciated... :-)
Thanks !