rescan-scsi-bus weirdness on -current

Hi,

After running the script from subject, this is what I am now seeing:
Quote:

# lsscsi [2:0:0:0] storage HP P420i 8.32 - [2:0:0:4194240] storage HP P420i 8.32 - <--- this line is not supposed to be here

Basically, that 2nd line is not showing up after clean boot.
And this output is what prompt me that something is off:

Quote:

# rescan-scsi-bus Scanning SCSI subsystem for new devices Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 1 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs Scanning host 2 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs sg1 changed: LU not available (PQual 3) OLD: Host: scsi2 Channel: 01 Id: 00 Lun: 00 Vendor: HP Model: LOGICAL VOLUME Rev: 8.32 Type: Direct-Access ANSI SCSI revision: 05 sg2 changed: LU not available (PQual 3) OLD: Host: scsi2 Channel: 00 Id: 00 Lun: 4194240 Vendor: HP Model: P420i Rev: 8.32 Type: RAID ANSI SCSI revision: 05 sg0 changed: LU not available (PQual 3) OLD: Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: HP Model: P420i Rev: 8.32 Type: RAID ANSI SCSI revision: 05 Scanning host 3 for SCSI target IDs 0 1 2 3 4 5 6 7, all LUNs 0 new or changed device(s) found. 0 remapped or resized device(s) found. 0 device(s) removed.

It didn't use to look like that, and I've been using that script for at least a decade :)
Just throwing it out there, in case someone saw it and know what's wrong (before I find some time to deep dive in the code myself :)