NVIDIA drivers do not work after upgrade from openSUSE 15.2 to 15.3
by gongalov from LinuxQuestions.org on (#5K3DA)
Hi, guys,
I upgraded my laptop from openSUSE 15.2 to 15.3 but it seams the system doesnt use the nvidia proprietary drivers that I installed following this guide
SDB:NVIDIA_drivers
My system info:
Code:ilian@localhost:~> sudo lshw -short
H/W path Device Class Description
================================================================
system TUF Gaming FX705DT_FX705DT
/0 bus FX705DT
/0/0 memory 64KiB BIOS
/0/a memory 16GiB System Memory
/0/a/0 memory 8GiB SODIMM DDR4 Synchronous Unbuffered (Unregistered) 2667 MHz (0,4 ns)
/0/a/1 memory 8GiB SODIMM DDR4 Synchronous Unbuffered (Unregistered) 2667 MHz (0,4 ns)
/0/c memory 384KiB L1 cache
/0/d memory 2MiB L2 cache
/0/e memory 4MiB L3 cache
/0/f processor AMD Ryzen 7 3750H with Radeon Vega Mobile Gfx
/0/100 bridge Raven/Raven2 Root Complex
/0/100/0.2 generic Raven/Raven2 IOMMU
/0/100/1.1 bridge Raven/Raven2 PCIe GPP Bridge [6:0]
/0/100/1.1/0 display TU117M [GeForce GTX 1650 Mobile / Max-Q]
/0/100/1.1/0.1 multimedia NVIDIA Corporation
/0/100/1.2 bridge Raven/Raven2 PCIe GPP Bridge [6:0]
/0/100/1.2/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
/0/100/1.3 bridge Raven/Raven2 PCIe GPP Bridge [6:0]
/0/100/1.3/0 /dev/nvme0 storage WDC PC SN520 SDAPMUW-128G-1101
/0/100/1.3/0/0 hwmon0 disk NVMe disk
/0/100/1.3/0/1 /dev/nvme0n1 disk 128GB NVMe disk
/0/100/1.3/0/1/1 /dev/nvme0n1p1 volume 528MiB Windows NTFS volume
/0/100/1.3/0/1/2 /dev/nvme0n1p2 volume 99MiB Windows FAT volume
/0/100/1.3/0/1/3 /dev/nvme0n1p3 volume 15MiB reserved partition
/0/100/1.3/0/1/4 /dev/nvme0n1p4 volume 98GiB Windows NTFS volume
/0/100/1.3/0/1/5 /dev/nvme0n1p5 volume 206MiB Windows FAT volume
/0/100/1.3/0/1/6 /dev/nvme0n1p6 volume 499MiB Windows FAT volume
/0/100/1.3/0/1/7 /dev/nvme0n1p7 volume 8191KiB BIOS Boot partition
/0/100/1.3/0/1/8 /dev/nvme0n1p8 volume 19GiB EFI partition
/0/100/1.7 bridge Raven/Raven2 PCIe GPP Bridge [6:0]
/0/100/1.7/0 wlan0 network RTL8821CE 802.11ac PCIe Wireless Network Adapter
/0/100/8.1 bridge Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A
/0/100/8.1/0 display Picasso
/0/100/8.1/0.2 generic Family 17h (Models 10h-1fh) Platform Security Processor
/0/100/8.1/0.3 bus Raven USB 3.1
/0/100/8.1/0.3/0 usb1 bus xHCI Host Controller
/0/100/8.1/0.3/0/2 input USB Receiver
/0/100/8.1/0.3/0/4 communication Bluetooth Radio
/0/100/8.1/0.3/1 usb2 bus xHCI Host Controller
/0/100/8.1/0.4 bus Raven USB 3.1
/0/100/8.1/0.4/0 usb3 bus xHCI Host Controller
/0/100/8.1/0.4/0/1 multimedia USB2.0 HD UVC WebCam
/0/100/8.1/0.4/1 usb4 bus xHCI Host Controller
/0/100/8.1/0.6 multimedia Family 17h (Models 10h-1fh) HD Audio Controller
/0/100/8.2 bridge Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus B
/0/100/8.2/0 scsi1 storage FCH SATA Controller [AHCI mode]
/0/100/8.2/0/0.0.0 /dev/sda disk 1TB ST1000LX015-1U71
/0/100/8.2/0/0.0.0/1 /dev/sda1 volume 467GiB Windows NTFS volume
/0/100/8.2/0/0.0.0/2 /dev/sda2 volume 499MiB Windows FAT volume
/0/100/8.2/0/0.0.0/3 /dev/sda3 volume 461GiB EXT4 volume
/0/100/8.2/0/0.0.0/4 /dev/sda4 volume 2GiB Linux swap volume
/0/100/14 bus FCH SMBus Controller
/0/100/14.3 bridge FCH LPC Bridge
/0/101 bridge Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
/0/102 bridge Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
/0/103 bridge Raven/Raven2 Device 24: Function 0
/0/104 bridge Raven/Raven2 Device 24: Function 1
/0/105 bridge Raven/Raven2 Device 24: Function 2
/0/106 bridge Raven/Raven2 Device 24: Function 3
/0/107 bridge Raven/Raven2 Device 24: Function 4
/0/108 bridge Raven/Raven2 Device 24: Function 5
/0/109 bridge Raven/Raven2 Device 24: Function 6
/0/10a bridge Raven/Raven2 Device 24: Function 7
/0/1 system PnP device PNP0c01
/0/2 system PnP device PNP0b00
/0/3 system PnP device PNP0c02
/0/4 input PnP device PNP0303Yast shows the drivers as installed, but there is no nVidia Control Panel and
I also tried The hard way but ended with a black screen with a non-flashing cursor and unable to do anything. After that i made a fresh install of 15.3, denied the installation of nouveau driver and then installed nvidia drivers via Yast. The system is UEFI with SecureBoot enabled, and I stuck on that part. I have no directory called /var/lib/nvidia-pubkeys/ (double checked this from console and Dolphin), so I cant execute the command
Code:mokutil --import /var/lib/nvidia-pubkeys/MOK-nvidia-gfxG05-460.80_k5.3.18_57-lp153.38.1.der --root-pwas it's described in the guide. Maybe that's the reason why the driver is not working.
Can anyone help me with this issue. I'm not feeling very comfortable in the console, so any help with this will be appreciated too. Thanks in advance.
I upgraded my laptop from openSUSE 15.2 to 15.3 but it seams the system doesnt use the nvidia proprietary drivers that I installed following this guide
SDB:NVIDIA_drivers
My system info:
Code:ilian@localhost:~> sudo lshw -short
H/W path Device Class Description
================================================================
system TUF Gaming FX705DT_FX705DT
/0 bus FX705DT
/0/0 memory 64KiB BIOS
/0/a memory 16GiB System Memory
/0/a/0 memory 8GiB SODIMM DDR4 Synchronous Unbuffered (Unregistered) 2667 MHz (0,4 ns)
/0/a/1 memory 8GiB SODIMM DDR4 Synchronous Unbuffered (Unregistered) 2667 MHz (0,4 ns)
/0/c memory 384KiB L1 cache
/0/d memory 2MiB L2 cache
/0/e memory 4MiB L3 cache
/0/f processor AMD Ryzen 7 3750H with Radeon Vega Mobile Gfx
/0/100 bridge Raven/Raven2 Root Complex
/0/100/0.2 generic Raven/Raven2 IOMMU
/0/100/1.1 bridge Raven/Raven2 PCIe GPP Bridge [6:0]
/0/100/1.1/0 display TU117M [GeForce GTX 1650 Mobile / Max-Q]
/0/100/1.1/0.1 multimedia NVIDIA Corporation
/0/100/1.2 bridge Raven/Raven2 PCIe GPP Bridge [6:0]
/0/100/1.2/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
/0/100/1.3 bridge Raven/Raven2 PCIe GPP Bridge [6:0]
/0/100/1.3/0 /dev/nvme0 storage WDC PC SN520 SDAPMUW-128G-1101
/0/100/1.3/0/0 hwmon0 disk NVMe disk
/0/100/1.3/0/1 /dev/nvme0n1 disk 128GB NVMe disk
/0/100/1.3/0/1/1 /dev/nvme0n1p1 volume 528MiB Windows NTFS volume
/0/100/1.3/0/1/2 /dev/nvme0n1p2 volume 99MiB Windows FAT volume
/0/100/1.3/0/1/3 /dev/nvme0n1p3 volume 15MiB reserved partition
/0/100/1.3/0/1/4 /dev/nvme0n1p4 volume 98GiB Windows NTFS volume
/0/100/1.3/0/1/5 /dev/nvme0n1p5 volume 206MiB Windows FAT volume
/0/100/1.3/0/1/6 /dev/nvme0n1p6 volume 499MiB Windows FAT volume
/0/100/1.3/0/1/7 /dev/nvme0n1p7 volume 8191KiB BIOS Boot partition
/0/100/1.3/0/1/8 /dev/nvme0n1p8 volume 19GiB EFI partition
/0/100/1.7 bridge Raven/Raven2 PCIe GPP Bridge [6:0]
/0/100/1.7/0 wlan0 network RTL8821CE 802.11ac PCIe Wireless Network Adapter
/0/100/8.1 bridge Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus A
/0/100/8.1/0 display Picasso
/0/100/8.1/0.2 generic Family 17h (Models 10h-1fh) Platform Security Processor
/0/100/8.1/0.3 bus Raven USB 3.1
/0/100/8.1/0.3/0 usb1 bus xHCI Host Controller
/0/100/8.1/0.3/0/2 input USB Receiver
/0/100/8.1/0.3/0/4 communication Bluetooth Radio
/0/100/8.1/0.3/1 usb2 bus xHCI Host Controller
/0/100/8.1/0.4 bus Raven USB 3.1
/0/100/8.1/0.4/0 usb3 bus xHCI Host Controller
/0/100/8.1/0.4/0/1 multimedia USB2.0 HD UVC WebCam
/0/100/8.1/0.4/1 usb4 bus xHCI Host Controller
/0/100/8.1/0.6 multimedia Family 17h (Models 10h-1fh) HD Audio Controller
/0/100/8.2 bridge Raven/Raven2 Internal PCIe GPP Bridge 0 to Bus B
/0/100/8.2/0 scsi1 storage FCH SATA Controller [AHCI mode]
/0/100/8.2/0/0.0.0 /dev/sda disk 1TB ST1000LX015-1U71
/0/100/8.2/0/0.0.0/1 /dev/sda1 volume 467GiB Windows NTFS volume
/0/100/8.2/0/0.0.0/2 /dev/sda2 volume 499MiB Windows FAT volume
/0/100/8.2/0/0.0.0/3 /dev/sda3 volume 461GiB EXT4 volume
/0/100/8.2/0/0.0.0/4 /dev/sda4 volume 2GiB Linux swap volume
/0/100/14 bus FCH SMBus Controller
/0/100/14.3 bridge FCH LPC Bridge
/0/101 bridge Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
/0/102 bridge Family 17h (Models 00h-1fh) PCIe Dummy Host Bridge
/0/103 bridge Raven/Raven2 Device 24: Function 0
/0/104 bridge Raven/Raven2 Device 24: Function 1
/0/105 bridge Raven/Raven2 Device 24: Function 2
/0/106 bridge Raven/Raven2 Device 24: Function 3
/0/107 bridge Raven/Raven2 Device 24: Function 4
/0/108 bridge Raven/Raven2 Device 24: Function 5
/0/109 bridge Raven/Raven2 Device 24: Function 6
/0/10a bridge Raven/Raven2 Device 24: Function 7
/0/1 system PnP device PNP0c01
/0/2 system PnP device PNP0b00
/0/3 system PnP device PNP0c02
/0/4 input PnP device PNP0303Yast shows the drivers as installed, but there is no nVidia Control Panel and
I also tried The hard way but ended with a black screen with a non-flashing cursor and unable to do anything. After that i made a fresh install of 15.3, denied the installation of nouveau driver and then installed nvidia drivers via Yast. The system is UEFI with SecureBoot enabled, and I stuck on that part. I have no directory called /var/lib/nvidia-pubkeys/ (double checked this from console and Dolphin), so I cant execute the command
Code:mokutil --import /var/lib/nvidia-pubkeys/MOK-nvidia-gfxG05-460.80_k5.3.18_57-lp153.38.1.der --root-pwas it's described in the guide. Maybe that's the reason why the driver is not working.
Can anyone help me with this issue. I'm not feeling very comfortable in the console, so any help with this will be appreciated too. Thanks in advance.