[GRUB] Warning messages while updating grub.cfg
by gbschenkel from LinuxQuestions.org on (#5NW3Y)
Hi, I have installed last kernel today and I saw this weird messages coming when I run `grub-mkconfig -o /boot/grub/grub.cfg` >> http://ix.io/3xa5
I just saw this today, the last time I have ran `grub-mkconfig` was Aug 19, when 5.13.12 went on current.
I tried for search this subject but didn't found anything which can help me.
Some say this happen after resizing the partition, but is not my case.
I tried to force fsck to run using `shutdown -hF now`, but the same warning remains.
Code:$ lsblk
NAME SIZE VENDOR MODEL TRAN TYPE PARTLABEL MOUNTPOINT
/dev/sda 465.8G ATA Samsung SSD 860 EVO 500GB sata disk
/dev/sda1 465.8G part Games
/dev/sdb 476.9G ATA SAMSUNG MZHPV512HDGL-00000 sata disk
/dev/sdb1 100M part
/dev/sdb2 100M part
/dev/sdb3 476.7G part
/dev/sr0 1024M HL-DT-ST HL-DT-ST BD-RE BH10LS30 sata rom
/dev/nvme0n1 931.5G GIGABYTE GP-ASM2NE6100TTTD nvme disk
/dev/nvme0n1p1 500M nvme part /boot/efi
/dev/nvme0n1p2 16G nvme part [SWAP]
/dev/nvme0n1p3 100G nvme part /
/dev/nvme0n1p4 500M nvme part /boot
/dev/nvme0n1p5 50G nvme part /var
/dev/nvme0n1p6 764.5G nvme part /homeCode:$ cat /etc/fstab
/dev/nvme0n1p2 swap swap defaults 0 0
/dev/nvme0n1p3 / f2fs defaults 1 1
/dev/nvme0n1p4 /boot f2fs defaults 1 2
/dev/nvme0n1p5 /var f2fs defaults 1 2
/dev/nvme0n1p6 /home f2fs defaults 1 2
/dev/nvme0n1p1 /boot/efi vfat defaults 1 0
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro,comment=x-gvfs-show 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs nosuid,nodev,noexec 0 0
tmpfs /tmp tmpfs size=16G,nosuid,nodev 0 0Any help is appreciated.
I just saw this today, the last time I have ran `grub-mkconfig` was Aug 19, when 5.13.12 went on current.
I tried for search this subject but didn't found anything which can help me.
Some say this happen after resizing the partition, but is not my case.
I tried to force fsck to run using `shutdown -hF now`, but the same warning remains.
Code:$ lsblk
NAME SIZE VENDOR MODEL TRAN TYPE PARTLABEL MOUNTPOINT
/dev/sda 465.8G ATA Samsung SSD 860 EVO 500GB sata disk
/dev/sda1 465.8G part Games
/dev/sdb 476.9G ATA SAMSUNG MZHPV512HDGL-00000 sata disk
/dev/sdb1 100M part
/dev/sdb2 100M part
/dev/sdb3 476.7G part
/dev/sr0 1024M HL-DT-ST HL-DT-ST BD-RE BH10LS30 sata rom
/dev/nvme0n1 931.5G GIGABYTE GP-ASM2NE6100TTTD nvme disk
/dev/nvme0n1p1 500M nvme part /boot/efi
/dev/nvme0n1p2 16G nvme part [SWAP]
/dev/nvme0n1p3 100G nvme part /
/dev/nvme0n1p4 500M nvme part /boot
/dev/nvme0n1p5 50G nvme part /var
/dev/nvme0n1p6 764.5G nvme part /homeCode:$ cat /etc/fstab
/dev/nvme0n1p2 swap swap defaults 0 0
/dev/nvme0n1p3 / f2fs defaults 1 1
/dev/nvme0n1p4 /boot f2fs defaults 1 2
/dev/nvme0n1p5 /var f2fs defaults 1 2
/dev/nvme0n1p6 /home f2fs defaults 1 2
/dev/nvme0n1p1 /boot/efi vfat defaults 1 0
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro,comment=x-gvfs-show 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs nosuid,nodev,noexec 0 0
tmpfs /tmp tmpfs size=16G,nosuid,nodev 0 0Any help is appreciated.