Wired connection problem (Installation of any distro and after)
by Leandrogc from LinuxQuestions.org on (#5QV8G)
Hi i have a Lenovo G460 with a problem when installing any distro, from the moment i boot with the usb to start with the installation proccess my wired connection stops working, and then when the distro is installed i can't access internet either, i been throught Ubuntu, Linux mint, now im on Manjaro 21.1.5 but i still have the same problem. Before changing to linux i had Windows 10 and the wired connection worked perfect so im guessing it's a linux problem(?
Im relatively new to linux so i don't know what should be the root of the problem
Code:Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Lenovo driver: r8169This is my Ethernet Adapter
Here are the outputs for:
ip link list
Code:: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether brd ff:ff:ff:ff:ff:fflspci -v
Code:06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 02)
Subsystem: Lenovo Device 392e
Flags: bus master, fast devsel, latency 0, IRQ 18
I/O ports at 2000 [size=256]
Memory at d2410000 (64-bit, prefetchable) [size=4K]
Memory at d2400000 (64-bit, prefetchable) [size=64K]
Expansion ROM at d5400000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-00-00-00-00
Kernel driver in use: r8169
Kernel modules: r8169
Im relatively new to linux so i don't know what should be the root of the problem
Code:Device-2: Realtek RTL810xE PCI Express Fast Ethernet vendor: Lenovo driver: r8169This is my Ethernet Adapter
Here are the outputs for:
ip link list
Code:: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether brd ff:ff:ff:ff:ff:fflspci -v
Code:06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 02)
Subsystem: Lenovo Device 392e
Flags: bus master, fast devsel, latency 0, IRQ 18
I/O ports at 2000 [size=256]
Memory at d2410000 (64-bit, prefetchable) [size=4K]
Memory at d2400000 (64-bit, prefetchable) [size=64K]
Expansion ROM at d5400000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-00-00-00-00
Kernel driver in use: r8169
Kernel modules: r8169