mount can't read superblock on /dev/sda5
by danielandrader from LinuxQuestions.org on (#5RQK3)
Hi, everyone,
My notebook couldn't start anymore.
I started it with a live USB Ubuntu 20.04 and tried mount /dev/sda5 but receive this error:
mount: /mnt: can't read superblock on /dev/sda5
So I tried the commands below:
###
Code:
ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda
Disk /dev/sda: 931,53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: WDC WD10SPZX-21Z
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 8798743C-1711-4EC3-9829-F392872338D3
Device Start End Sectors Size Type
/dev/sda1 2048 206847 204800 100M EFI System
/dev/sda2 206848 239615 32768 16M Microsoft reserved
/dev/sda3 239616 408477642 408238027 194,7G Microsoft basic data
/dev/sda4 1951424512 1953521663 2097152 1G Windows recovery environment
/dev/sda5 408477696 1951424511 1542946816 735,8G Linux filesystem
Partition table entries are not in disk order.###
###
I tried the solution that Xiao Guoa give in this site, but I haven't sucesss.
Source: https://www.linuxbabe.com/desktop-li...perblock-error
###
Code:
ubuntu@ubuntu:~$ sudo mke2fs -n /dev/sda5
mke2fs 1.45.5 (07-Jan-2020)
Creating filesystem with 192868352 4k blocks and 48218112 inodes
Filesystem UUID: 9f522638-1d6a-451f-b608-dc03acd3250b
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000###
Now I tried with all blocks * 4, without sucess.
block 98304 * 4 = 393216
Source: https://unix.stackexchange.com/quest...bad-superblock
Code:
ubuntu@ubuntu:~$ sudo mount -o sb=393216 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=655360 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=917504 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=1179648 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=3276800 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=3538944 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=6422528 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=10616832 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=16384000 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=31850496 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=44957696 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=81920000 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=95551488 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=286654464 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=314703872 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=409600000 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.###
After that I have runned e2fsck for 3 days, without success.
Code:
ubuntu@ubuntu:~$ sudo e2fsck -f -y -v -c -b 32768 /dev/sda5
e2fsck 1.45.5 (07-Jan-2020)
Error reading block 1149 (Input/output error). Ignore error? yes
Force rewrite? yes
Superblock has an invalid journal (inode 8).
Clear? yes
*** journal has been deleted ***
Resize inode not valid. Recreate? yes
Error reading block 1117 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1133 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1118 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1134 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1119 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1120 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1122 (Input/output error) while reading inode and block bitmaps. Ignore error? yes###
Error dmesg
Code:
[217797.911529] ata1: EH complete
[217807.220171] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[217807.220191] ata1.00: irq_stat 0x40000001
[217807.220198] ata1.00: failed command: READ DMA EXT
[217807.220203] ata1.00: cmd 25/00:08:d8:e0:98/00:00:18:00:00/e0 tag 24 dma 4096 in
res 51/40:08:d8:e0:98/00:00:18:00:00/e0 Emask 0x9 (media error)
[217807.220220] ata1.00: status: { DRDY ERR }
[217807.220225] ata1.00: error: { UNC }
[217812.260182] ata1.00: qc timeout (cmd 0xec)
[217812.260211] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[217812.260222] ata1.00: revalidation failed (errno=-5)
[217812.260240] ata1: hard resetting link
[217812.575276] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[217818.410875] ata1.00: configured for UDMA/133
[217818.410924] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=20s
[217818.410936] sd 0:0:0:0: [sda] tag#24 Sense Key : Medium Error [current]
[217818.410945] sd 0:0:0:0: [sda] tag#24 Add. Sense: Unrecovered read error - auto reallocate failed
[217818.410955] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 18 98 e0 d8 00 00 08 00
[217818.410960] blk_update_request: I/O error, dev sda, sector 412672216 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[217818.411029] ata1: EH complete
[217821.396529] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[217821.396556] ata1.00: irq_stat 0x40000001
[217821.396568] ata1.00: failed command: READ DMA EXT
[217821.396575] ata1.00: cmd 25/00:08:d8:e0:98/00:00:18:00:00/e0 tag 20 dma 4096 in
res 51/40:08:d8:e0:98/00:00:18:00:00/e0 Emask 0x9 (media error)
[217821.396604] ata1.00: status: { DRDY ERR }
[217821.396612] ata1.00: error: { UNC }
[217826.592096] ata1.00: qc timeout (cmd 0xec)
[217826.592112] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[217826.592116] ata1.00: revalidation failed (errno=-5)
[217826.592122] ata1: hard resetting link
[217826.908977] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[217845.710563] ata1.00: configured for UDMA/133
[217845.710611] sd 0:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=27s
[217845.710624] sd 0:0:0:0: [sda] tag#20 Sense Key : Medium Error [current]
[217845.710632] sd 0:0:0:0: [sda] tag#20 Add. Sense: Unrecovered read error - auto reallocate failed
[217845.710641] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 18 98 e0 d8 00 00 08 00
[217845.710647] blk_update_request: I/O error, dev sda, sector 412672216 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[217845.710670] Buffer I/O error on dev sda5, logical block 524315, async page read
[217845.710722] ata1: EH complete
[217861.384383] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[217861.384409] ata1.00: irq_stat 0x40000001
[217861.384420] ata1.00: failed command: READ DMA EXT
[217861.384428] ata1.00: cmd 25/00:08:d8:e0:98/00:00:18:00:00/e0 tag 0 dma 4096 in
res 51/40:08:d8:e0:98/00:00:18:00:00/e0 Emask 0x9 (media error)
[217861.384457] ata1.00: status: { DRDY ERR }
[217861.384465] ata1.00: error: { UNC }
[217866.528299] ata1.00: qc timeout (cmd 0xec)
[217866.528326] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[217866.528335] ata1.00: revalidation failed (errno=-5)
[217866.528352] ata1: hard resetting link
[217866.843346] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[217885.732336] ata1.00: configured for UDMA/133
[217885.732383] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=40s
[217885.732395] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[217885.732404] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[217885.732414] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 18 98 e0 d8 00 00 08 00
[217885.732419] blk_update_request: I/O error, dev sda, sector 412672216 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[217885.732442] Buffer I/O error on dev sda5, logical block 524315, async page read
[217885.732492] ata1: EH complete
[217895.039725] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[217895.039750] ata1.00: irq_stat 0x40000001
[217895.039761] ata1.00: failed command: READ DMA EXT
[217895.039769] ata1.00: cmd 25/00:08:60:e0:98/00:00:18:00:00/e0 tag 1 dma 4096 in
res 51/40:08:60:e0:98/00:00:18:00:00/e0 Emask 0x9 (media error)
[217895.039797] ata1.00: status: { DRDY ERR }
[217895.039806] ata1.00: error: { UNC }
[217900.067695] ata1.00: qc timeout (cmd 0xec)
[217900.067710] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[217900.067715] ata1.00: revalidation failed (errno=-5)
[217900.067723] ata1: hard resetting link
[217900.383017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[217919.221200] ata1.00: configured for UDMA/133
[217919.221247] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=33s
[217919.221260] sd 0:0:0:0: [sda] tag#1 Sense Key : Medium Error [current]
[217919.221269] sd 0:0:0:0: [sda] tag#1 Add. Sense: Unrecovered read error - auto reallocate failed
[217919.221279] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 18 98 e0 60 00 00 08 00
[217919.221285] blk_update_request: I/O error, dev sda, sector 412672096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[217919.221353] ata1: EH complete###
In this thread rknichols show how to find a sector offset in the partition to zero the block safely, but I don't really understand and I was afraid to do that.
Source: https://www.linuxquestions.org/quest...ad-4175600715/
###
Code:
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda5
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-27-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10SPZX-21Z10T0
Serial Number: WD-WXS1A877RJED
LU WWN Device Id: 5 0014ee 6081e1249
Firmware Version: 02.01A02
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Wed Nov 10 02:11:30 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7680) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 223) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail Always FAILING_NOW 19950
3 Spin_Up_Time 0x0027 194 187 021 Pre-fail Always - 1258
4 Start_Stop_Count 0x0032 092 092 000 Old_age Always - 8733
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5258
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1222
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 31491
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 44
193 Load_Cycle_Count 0x0032 181 181 000 Old_age Always - 59346
194 Temperature_Celsius 0x0022 104 098 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 198 198 000 Old_age Always - 441
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 219 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 219 occurred at disk power-on lifetime: 5257 hours (219 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 02 a8 03 e0 Error: UNC 2 sectors at LBA = 0x0003a802 = 239618
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 02 02 a8 03 e0 08 2d+00:46:14.317 READ DMA
ec 00 00 00 00 00 a0 08 2d+00:46:14.316 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 2d+00:46:14.316 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 2d+00:46:14.212 IDENTIFY DEVICE
Error 218 occurred at disk power-on lifetime: 5200 hours (216 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 28 03 e0 Error: UNC 8 sectors at LBA = 0x00032800 = 206848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 28 03 e0 08 02:27:11.836 READ DMA
e5 00 00 00 00 00 00 08 02:27:11.836 CHECK POWER MODE
ec 00 00 00 00 00 a0 08 02:27:11.835 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 02:27:11.825 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 02:27:11.704 IDENTIFY DEVICE
Error 217 occurred at disk power-on lifetime: 5200 hours (216 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 28 03 e0 Error: UNC 8 sectors at LBA = 0x00032800 = 206848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 28 03 e0 08 02:26:57.401 READ DMA
e5 00 00 00 00 00 00 08 02:26:57.400 CHECK POWER MODE
ec 00 00 00 00 00 a0 08 02:26:57.384 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 02:26:57.384 SET FEATURES [Set transfer mode]
Error 216 occurred at disk power-on lifetime: 5200 hours (216 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 80 27 03 e0 Error: UNC 8 sectors at LBA = 0x00032780 = 206720
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 80 27 03 e0 08 02:26:15.363 READ DMA
ec 00 00 00 00 00 a0 08 02:26:15.349 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 02:26:15.337 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 02:26:15.223 IDENTIFY DEVICE
Error 215 occurred at disk power-on lifetime: 5200 hours (216 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 80 27 03 e0 Error: UNC 8 sectors at LBA = 0x00032780 = 206720
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 80 27 03 e0 08 02:26:03.763 READ DMA
ec 00 00 00 00 00 a0 08 02:26:03.762 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 02:26:03.759 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 02:26:03.630 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
###
Someone can help me to solve this issue. I have some files that I don't have backup and I wouldn't like to give up before try everything to recover this hard disk.
Thank you.
My notebook couldn't start anymore.
I started it with a live USB Ubuntu 20.04 and tried mount /dev/sda5 but receive this error:
mount: /mnt: can't read superblock on /dev/sda5
So I tried the commands below:
###
Code:
ubuntu@ubuntu:~$ sudo fdisk -l /dev/sda
Disk /dev/sda: 931,53 GiB, 1000204886016 bytes, 1953525168 sectors
Disk model: WDC WD10SPZX-21Z
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 8798743C-1711-4EC3-9829-F392872338D3
Device Start End Sectors Size Type
/dev/sda1 2048 206847 204800 100M EFI System
/dev/sda2 206848 239615 32768 16M Microsoft reserved
/dev/sda3 239616 408477642 408238027 194,7G Microsoft basic data
/dev/sda4 1951424512 1953521663 2097152 1G Windows recovery environment
/dev/sda5 408477696 1951424511 1542946816 735,8G Linux filesystem
Partition table entries are not in disk order.###
###
I tried the solution that Xiao Guoa give in this site, but I haven't sucesss.
Source: https://www.linuxbabe.com/desktop-li...perblock-error
###
Code:
ubuntu@ubuntu:~$ sudo mke2fs -n /dev/sda5
mke2fs 1.45.5 (07-Jan-2020)
Creating filesystem with 192868352 4k blocks and 48218112 inodes
Filesystem UUID: 9f522638-1d6a-451f-b608-dc03acd3250b
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000###
Now I tried with all blocks * 4, without sucess.
block 98304 * 4 = 393216
Source: https://unix.stackexchange.com/quest...bad-superblock
Code:
ubuntu@ubuntu:~$ sudo mount -o sb=393216 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=655360 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=917504 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=1179648 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=3276800 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=3538944 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=6422528 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=10616832 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=16384000 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=31850496 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=44957696 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=81920000 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=95551488 /dev/sda5 /mnt
mount: /mnt: can't read superblock on /dev/sda5.
ubuntu@ubuntu:~$ sudo mount -o sb=286654464 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=314703872 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.
ubuntu@ubuntu:~$ sudo mount -o sb=409600000 /dev/sda5 /mnt
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error.###
After that I have runned e2fsck for 3 days, without success.
Code:
ubuntu@ubuntu:~$ sudo e2fsck -f -y -v -c -b 32768 /dev/sda5
e2fsck 1.45.5 (07-Jan-2020)
Error reading block 1149 (Input/output error). Ignore error? yes
Force rewrite? yes
Superblock has an invalid journal (inode 8).
Clear? yes
*** journal has been deleted ***
Resize inode not valid. Recreate? yes
Error reading block 1117 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1133 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1118 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1134 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1119 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1120 (Input/output error) while reading inode and block bitmaps. Ignore error? yes
Force rewrite? yes
Error reading block 1122 (Input/output error) while reading inode and block bitmaps. Ignore error? yes###
Error dmesg
Code:
[217797.911529] ata1: EH complete
[217807.220171] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[217807.220191] ata1.00: irq_stat 0x40000001
[217807.220198] ata1.00: failed command: READ DMA EXT
[217807.220203] ata1.00: cmd 25/00:08:d8:e0:98/00:00:18:00:00/e0 tag 24 dma 4096 in
res 51/40:08:d8:e0:98/00:00:18:00:00/e0 Emask 0x9 (media error)
[217807.220220] ata1.00: status: { DRDY ERR }
[217807.220225] ata1.00: error: { UNC }
[217812.260182] ata1.00: qc timeout (cmd 0xec)
[217812.260211] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[217812.260222] ata1.00: revalidation failed (errno=-5)
[217812.260240] ata1: hard resetting link
[217812.575276] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[217818.410875] ata1.00: configured for UDMA/133
[217818.410924] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=20s
[217818.410936] sd 0:0:0:0: [sda] tag#24 Sense Key : Medium Error [current]
[217818.410945] sd 0:0:0:0: [sda] tag#24 Add. Sense: Unrecovered read error - auto reallocate failed
[217818.410955] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 18 98 e0 d8 00 00 08 00
[217818.410960] blk_update_request: I/O error, dev sda, sector 412672216 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[217818.411029] ata1: EH complete
[217821.396529] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[217821.396556] ata1.00: irq_stat 0x40000001
[217821.396568] ata1.00: failed command: READ DMA EXT
[217821.396575] ata1.00: cmd 25/00:08:d8:e0:98/00:00:18:00:00/e0 tag 20 dma 4096 in
res 51/40:08:d8:e0:98/00:00:18:00:00/e0 Emask 0x9 (media error)
[217821.396604] ata1.00: status: { DRDY ERR }
[217821.396612] ata1.00: error: { UNC }
[217826.592096] ata1.00: qc timeout (cmd 0xec)
[217826.592112] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[217826.592116] ata1.00: revalidation failed (errno=-5)
[217826.592122] ata1: hard resetting link
[217826.908977] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[217845.710563] ata1.00: configured for UDMA/133
[217845.710611] sd 0:0:0:0: [sda] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=27s
[217845.710624] sd 0:0:0:0: [sda] tag#20 Sense Key : Medium Error [current]
[217845.710632] sd 0:0:0:0: [sda] tag#20 Add. Sense: Unrecovered read error - auto reallocate failed
[217845.710641] sd 0:0:0:0: [sda] tag#20 CDB: Read(10) 28 00 18 98 e0 d8 00 00 08 00
[217845.710647] blk_update_request: I/O error, dev sda, sector 412672216 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[217845.710670] Buffer I/O error on dev sda5, logical block 524315, async page read
[217845.710722] ata1: EH complete
[217861.384383] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[217861.384409] ata1.00: irq_stat 0x40000001
[217861.384420] ata1.00: failed command: READ DMA EXT
[217861.384428] ata1.00: cmd 25/00:08:d8:e0:98/00:00:18:00:00/e0 tag 0 dma 4096 in
res 51/40:08:d8:e0:98/00:00:18:00:00/e0 Emask 0x9 (media error)
[217861.384457] ata1.00: status: { DRDY ERR }
[217861.384465] ata1.00: error: { UNC }
[217866.528299] ata1.00: qc timeout (cmd 0xec)
[217866.528326] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[217866.528335] ata1.00: revalidation failed (errno=-5)
[217866.528352] ata1: hard resetting link
[217866.843346] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[217885.732336] ata1.00: configured for UDMA/133
[217885.732383] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=40s
[217885.732395] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current]
[217885.732404] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[217885.732414] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 18 98 e0 d8 00 00 08 00
[217885.732419] blk_update_request: I/O error, dev sda, sector 412672216 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[217885.732442] Buffer I/O error on dev sda5, logical block 524315, async page read
[217885.732492] ata1: EH complete
[217895.039725] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[217895.039750] ata1.00: irq_stat 0x40000001
[217895.039761] ata1.00: failed command: READ DMA EXT
[217895.039769] ata1.00: cmd 25/00:08:60:e0:98/00:00:18:00:00/e0 tag 1 dma 4096 in
res 51/40:08:60:e0:98/00:00:18:00:00/e0 Emask 0x9 (media error)
[217895.039797] ata1.00: status: { DRDY ERR }
[217895.039806] ata1.00: error: { UNC }
[217900.067695] ata1.00: qc timeout (cmd 0xec)
[217900.067710] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[217900.067715] ata1.00: revalidation failed (errno=-5)
[217900.067723] ata1: hard resetting link
[217900.383017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[217919.221200] ata1.00: configured for UDMA/133
[217919.221247] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=33s
[217919.221260] sd 0:0:0:0: [sda] tag#1 Sense Key : Medium Error [current]
[217919.221269] sd 0:0:0:0: [sda] tag#1 Add. Sense: Unrecovered read error - auto reallocate failed
[217919.221279] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 18 98 e0 60 00 00 08 00
[217919.221285] blk_update_request: I/O error, dev sda, sector 412672096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[217919.221353] ata1: EH complete###
In this thread rknichols show how to find a sector offset in the partition to zero the block safely, but I don't really understand and I was afraid to do that.
Source: https://www.linuxquestions.org/quest...ad-4175600715/
###
Code:
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda5
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.11.0-27-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD10SPZX-21Z10T0
Serial Number: WD-WXS1A877RJED
LU WWN Device Id: 5 0014ee 6081e1249
Firmware Version: 02.01A02
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Wed Nov 10 02:11:30 2021 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 7680) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 223) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 001 001 051 Pre-fail Always FAILING_NOW 19950
3 Spin_Up_Time 0x0027 194 187 021 Pre-fail Always - 1258
4 Start_Stop_Count 0x0032 092 092 000 Old_age Always - 8733
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 5258
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1222
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 31491
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 44
193 Load_Cycle_Count 0x0032 181 181 000 Old_age Always - 59346
194 Temperature_Celsius 0x0022 104 098 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 198 198 000 Old_age Always - 441
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 219 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 219 occurred at disk power-on lifetime: 5257 hours (219 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 02 a8 03 e0 Error: UNC 2 sectors at LBA = 0x0003a802 = 239618
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 02 02 a8 03 e0 08 2d+00:46:14.317 READ DMA
ec 00 00 00 00 00 a0 08 2d+00:46:14.316 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 2d+00:46:14.316 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 2d+00:46:14.212 IDENTIFY DEVICE
Error 218 occurred at disk power-on lifetime: 5200 hours (216 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 28 03 e0 Error: UNC 8 sectors at LBA = 0x00032800 = 206848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 28 03 e0 08 02:27:11.836 READ DMA
e5 00 00 00 00 00 00 08 02:27:11.836 CHECK POWER MODE
ec 00 00 00 00 00 a0 08 02:27:11.835 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 02:27:11.825 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 02:27:11.704 IDENTIFY DEVICE
Error 217 occurred at disk power-on lifetime: 5200 hours (216 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 28 03 e0 Error: UNC 8 sectors at LBA = 0x00032800 = 206848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 28 03 e0 08 02:26:57.401 READ DMA
e5 00 00 00 00 00 00 08 02:26:57.400 CHECK POWER MODE
ec 00 00 00 00 00 a0 08 02:26:57.384 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 02:26:57.384 SET FEATURES [Set transfer mode]
Error 216 occurred at disk power-on lifetime: 5200 hours (216 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 80 27 03 e0 Error: UNC 8 sectors at LBA = 0x00032780 = 206720
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 80 27 03 e0 08 02:26:15.363 READ DMA
ec 00 00 00 00 00 a0 08 02:26:15.349 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 02:26:15.337 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 02:26:15.223 IDENTIFY DEVICE
Error 215 occurred at disk power-on lifetime: 5200 hours (216 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 80 27 03 e0 Error: UNC 8 sectors at LBA = 0x00032780 = 206720
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 80 27 03 e0 08 02:26:03.763 READ DMA
ec 00 00 00 00 00 a0 08 02:26:03.762 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 02:26:03.759 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 02:26:03.630 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
###
Someone can help me to solve this issue. I have some files that I don't have backup and I wouldn't like to give up before try everything to recover this hard disk.
Thank you.