Asus Packs 12-Core Intel i7 Into a Raspberry Pi-Sized Board

An anonymous reader quotes a report from The Register: The biz's GENE-ADP6, announced this week, can pack as much as a 12-core/16-thread Intel processor with Iris Xe graphics into a 3.5-inch form factor. The diminutive system is aimed at machine-vision applications and can be configured with your choice of Intel silicon including Celeron, or Core i3, i5, or a choice of 10 or 12-core i7 processors. As with other SBCs we've seen from Aaeon and others, the processors aren't socketed so you won't be upgrading later. This device is pretty much aimed at embedded and industrial use, mind. All five SKUs are powered by Intel's current-gen Alder Lake mobile processor family, including a somewhat unusual 5-core Celeron processor that pairs a single performance core with four efficiency cores. However, only the i5 and i7 SKUs come equipped with Intel's Iris Xe integrated graphics. The i3 and Celeron are stuck on UHD graphics. The board can be equipped with up to 64GB of DDR5 memory operating at up to 4800 megatransfers/sec by way of a pair of SODIMM modules. For I/O the board features a nice set of connectivity including a pair of NICs operating at 2.5 Gbit/sec and 1 Gbit/sec, HDMI 2.1 and Display Port 1.4, three 10Gbit/sec-capable USB 3.2 Gen 2 ports, and a single USB-C port that supports up to 15W of power delivery and display out. For those looking for additional connectivity for their embedded applications, the system also features a plethora of pin headers for USB 2.0, display out, serial interfaces, and 8-bit GPIO. Storage is provided by your choice of a SATA 3.0 interface or a m.2 mSATA/NVMe SSD. Unlike Aaeon's Epic-TGH7 announced last month, the GENE-ADP6 is too small to accommodate a standard PCIe slot, but does feature a FPC connector, which the company says supports additional NVMe storage or external graphics by way of a 4x PCIe 4.0 interface.

Read more of this story at Slashdot.