Wired connection not working -current Nov 10th...

I last successfully used my wired connection on November 8th and overnight LAN via wired connection has failed. Fortunately I have wireless available and this is working nicely.

I am using Network Manager and remain completely puzzled at this sudden failure on an up to dat -current system.

Some info:

Code:root@illium/home/andrew# ifconfig -a
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:d8:61:0d:b4:93 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xba100000-ba11ffff

eth1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 00:d8:61:0d:b4:94 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xba000000-ba01ffff

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 2 bytes 80 (80.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2 bytes 80 (80.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.212 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::c622:6f7f:ecf9:8a1 prefixlen 64 scopeid 0x20<link>
ether 64:5d:86:dc:fc:f8 txqueuelen 1000 (Ethernet)
RX packets 3504 bytes 1422830 (1.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2993 bytes 903916 (882.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0Not sure where to go from here, any input appreciated...
Attached Thumbnails