Request for driver support for Ethernet Controller
by fanhuman from LinuxQuestions.org on (#6QJJ9)
Hello, I encountered a problem with the wired network card driver when using Ubuntu 20.04.
xdk@xdk-pc:~$ lspci -nn | grep -i ethernet
01:00.0 Ethernet controller [0200]: Device [1f0a:6801] (rev 01)
xdk@xdk-pc:~$ sudo lshw -C network
*-network UNCLAIMED
description: Ethernet controller
physical id: 0
bus info: pci@0000:01:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list
configuration: latency=0
resources: memory:dcc00000-dcc03fff ioport:f000(size=256)
*-network
description: Wireless interface
product: Wi-Fi 6 AX200
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlp2s0
version: 1a
serial: dc:45:46:95:9f:25
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=5.15.0-119-generic firmware=66.f1c864e0.0 cc-a0-66.ucode ip=192.168.31.180 latency=0 link=yes multicast=yes wireless=IEEE 802.11
resources: irq:68 memory:dcb00000-dcb03fff
I use a wired network card from Tsinghua Tongfang, which only has a network card driver for Windows. The link address is as follows: https://driver.mechrevo.com/d.mechre..._V1.0.1.38.zip
I am a fan of Linux, and I really want to use Linux well. I hope you can help me use the wired network card driver on Linux to do scientific research experiments.
xdk@xdk-pc:~$ lspci -nn | grep -i ethernet
01:00.0 Ethernet controller [0200]: Device [1f0a:6801] (rev 01)
xdk@xdk-pc:~$ sudo lshw -C network
*-network UNCLAIMED
description: Ethernet controller
physical id: 0
bus info: pci@0000:01:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list
configuration: latency=0
resources: memory:dcc00000-dcc03fff ioport:f000(size=256)
*-network
description: Wireless interface
product: Wi-Fi 6 AX200
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlp2s0
version: 1a
serial: dc:45:46:95:9f:25
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=5.15.0-119-generic firmware=66.f1c864e0.0 cc-a0-66.ucode ip=192.168.31.180 latency=0 link=yes multicast=yes wireless=IEEE 802.11
resources: irq:68 memory:dcb00000-dcb03fff
I use a wired network card from Tsinghua Tongfang, which only has a network card driver for Windows. The link address is as follows: https://driver.mechrevo.com/d.mechre..._V1.0.1.38.zip
I am a fan of Linux, and I really want to use Linux well. I hope you can help me use the wired network card driver on Linux to do scientific research experiments.