A simple homebrew high pass filter

Many thanks to Jon Hudson, of SDRplay, who posted the image above along with the following note on Facebook:

David, WA7JHZ has designed and assembled this neat 2.6 MHz high-pass filter (HPF) for use with SDRs. He says that this simple input band-pass filter (BPF) might be of interest to anyone suffering from strong AM broadcast stations that are causing overloads"..David suffers from three nearby AM radio broadcast stations that overload the front ends of several of his receivers, including the SDRplay RSP and this is an ideal, low cost solution. He built this circuit from junk parts and commented that Amidon T44-2 iron powder cores would have made a better design, but that he decided to keep costs down with this design.

This design is simple enough for almost anyone to build and could help your receiver's front end from overloading. Many thanks to David for the design/schematic and to Jon for sharing!