Qemu NO KVM
by chaz_bro1972 from LinuxQuestions.org on (#4YAKQ)
I'm sorry if this has been asked & answered before. I searched exhaustively for RECENT articles or forum posts that explicitly listed the steps to get Qemu running on my 64 bit Slackware 14.2 system, BUT alas! I cannot find anything CURRENT.
My system DOES NOT use virtualization. There is no option for it in the BIOS. I LOOKED!
It is a 64 bit system:
Code:# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 23
Model name: Intel(R) Core(TM)2 CPU E7400 @ 2.80GHz
Stepping: 10
CPU MHz: 2799.948
BogoMIPS: 5599.89
L1d cache: 32K
L1i cache: 32K
L2 cache: 3072K
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni monitor tm2 ssse3 lahf_lm kaiser dthermCode:# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 CPU E7400 @ 2.80GHz
stepping : 10
cpu MHz : 2799.948
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni monitor tm2 ssse3 lahf_lm kaiser dtherm
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
bogomips : 5599.89
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 CPU E7400 @ 2.80GHz
stepping : 10
cpu MHz : 2799.948
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni monitor tm2 ssse3 lahf_lm kaiser dtherm
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
bogomips : 5599.89
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:Is it possible to install Qemu WITHOUT KVM? Because I am missing "/dev/kvm".
Also Qemu can't seem to install from the new 4.1.0 Slackbuild. It fails every time.
The main goal here is to run Android-x86 inside Qemu.
My system DOES NOT use virtualization. There is no option for it in the BIOS. I LOOKED!
It is a 64 bit system:
Code:# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 23
Model name: Intel(R) Core(TM)2 CPU E7400 @ 2.80GHz
Stepping: 10
CPU MHz: 2799.948
BogoMIPS: 5599.89
L1d cache: 32K
L1i cache: 32K
L2 cache: 3072K
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni monitor tm2 ssse3 lahf_lm kaiser dthermCode:# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 CPU E7400 @ 2.80GHz
stepping : 10
cpu MHz : 2799.948
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni monitor tm2 ssse3 lahf_lm kaiser dtherm
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
bogomips : 5599.89
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 CPU E7400 @ 2.80GHz
stepping : 10
cpu MHz : 2799.948
cache size : 3072 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni monitor tm2 ssse3 lahf_lm kaiser dtherm
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
bogomips : 5599.89
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:Is it possible to install Qemu WITHOUT KVM? Because I am missing "/dev/kvm".
Also Qemu can't seem to install from the new 4.1.0 Slackbuild. It fails every time.
The main goal here is to run Android-x86 inside Qemu.