OpenSuse Tumbleweed - ALSA not seeing audio

Hey everyone,

So I'm having a little trouble with ALSA seeing my audio output from my NVIDIA card.

I moved to OpenSuse Tumbleweed from Debian 10 Buster, on buster the Display Port would send audio out to my monitor, and I would have a sound card that I could change between the internal PC audio, and the display port audio.

I', running ALSA version k5.6.11-1-default, and kernel 5.6.11-1-default

As you can see, the output of aplay -L only sees my Intel card.

sudo aplay -L

Code:null

Discard all samples (playback) or generate zero samples (capture)

sysdefault

Default Audio Device

speexrate

Rate Converter Plugin Using Speex Resampler

pulse

PulseAudio Sound Server

upmix

Plugin for channel upmix (4,6,8)

default

Default ALSA Output (currently PulseAudio Sound Server)

sysdefault:CARD=PCH

HDA Intel PCH, ALC233 Analog

Default Audio Device

front:CARD=PCH,DEV=0

HDA Intel PCH, ALC233 Analog

Front speakers

surround21:CARD=PCH,DEV=0

HDA Intel PCH, ALC233 Analog

2.1 Surround output to Front and Subwoofer speakers

surround40:CARD=PCH,DEV=0

HDA Intel PCH, ALC233 Analog

4.0 Surround output to Front and Rear speakers

surround41:CARD=PCH,DEV=0

HDA Intel PCH, ALC233 Analog

4.1 Surround output to Front, Rear and Subwoofer speakers

surround50:CARD=PCH,DEV=0

HDA Intel PCH, ALC233 Analog

5.0 Surround output to Front, Center and Rear speakers

surround51:CARD=PCH,DEV=0

HDA Intel PCH, ALC233 Analog

5.1 Surround output to Front, Center, Rear and Subwoofer speakers

surround71:CARD=PCH,DEV=0

HDA Intel PCH, ALC233 Analog

7.1 Surround output to Front, Center, Side, Rear and Woofer speakers

hdmi:CARD=PCH,DEV=0

HDA Intel PCH, HDMI 0

HDMI Audio Output

hdmi:CARD=PCH,DEV=1

HDA Intel PCH, HDMI 1

HDMI Audio Output

hdmi:CARD=PCH,DEV=2

HDA Intel PCH, HDMI 2

HDMI Audio Output

hdmi:CARD=PCH,DEV=3

HDA Intel PCH, HDMI 3

HDMI Audio Output

hdmi:CARD=PCH,DEV=4

HDA Intel PCH, HDMI 4

HDMI Audio Output
The same can be seen in ?proc/asound/cards

Code:cat /proc/asound/cards

0 [C920 ]: USB-Audio - HD Pro Webcam C920

HD Pro Webcam C920 at usb-0000:00:14.0-1.2, high speed

1 [PCH ]: HDA-Intel - HDA Intel PCH

HDA Intel PCH at 0xb4230000 irq 142

My P400 NVIDIA Quadro card is detected and can been seen, and is working normally.

sudo lspci

[sudo] password for root:

00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07)

00:02.0 Display controller: Intel Corporation UHD Graphics 630 (Desktop)

00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model

00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)

00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)

00:14.3 Network controller: Intel Corporation Wireless-AC 9560 [Jefferson Peak] (rev 10)

00:15.0 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #0 (rev 10)

00:15.1 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH Serial IO I2C Controller #1 (rev 10)

00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)

00:16.3 Serial controller: Intel Corporation Cannon Lake PCH Active Management Technology - SOL (rev 10)

00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)

00:1e.0 Communication controller: Intel Corporation Cannon Lake PCH Serial IO UART Host Controller (rev 10)

00:1f.0 ISA bridge: Intel Corporation Cannon Point-LP LPC Controller (rev 10)

00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)

00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)

00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)

00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-LM (rev 10)

01:00.0 VGA compatible controller: NVIDIA Corporation GP107GL [Quadro P400] (rev a1)

I'm assuming that the ALSA kernel modules are not correctly loaded, which is why tumbleweed is not seeing my NVIDIA audio card, but I am fairly new to openSuse, and only just beginning my journey into Linux.

If this is the case, then how do I update the ALSA kernel modules?