Random Shutdown
by Bob Fletcher from LinuxQuestions.org on (#55E9H)
Hardware:
CPU: AMD Ryzen 3 1300X Quad-Core Processor * 4
Memory: 16 GB
Mobo: Asrock B450M Pro4
GPU: NVIDIA Corporation GP108 [GeForce GT 1030]
HDD: Sabrent NVME 1TB
OS Manjaro
Hi, can you help I am getting random shutdowns? For some time I was running this in an ATX case with an MSI B450 Gaming Plus. I decided to change the case for something smaller and went for an mATX but this meant a change of motherboard so I went for the Asrock. Same chipset. The only other change was a Sabrent 1TB NVME drive.
The BIOS is at default. But I am getting random shutdowns with a flash of a "hardware error". It is too quick to read any more.
I installed "Sensors" and print output. I am concerned that AUXTIN2 is at 96C. I am a bit out of mt depth so I would appreciate some help. I am presuming this is a CPU core.
Code:iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +41.0C
nvme-pci-0100
Adapter: PCI adapter
Composite: +27.9C (low = -0.1C, high = +74.8C)
(crit = +79.8C)
nct6779-isa-0290
Adapter: ISA adapter
Vcore: 336.00 mV (min = +0.00 V, max = +1.74 V)
in1: 328.00 mV (min = +0.00 V, max = +0.00 V) ALARM
AVCC: 3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: 3.42 V (min = +2.98 V, max = +3.63 V)
in4: 1.88 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 848.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 304.00 mV (min = +0.00 V, max = +0.00 V) ALARM
3VSB: 3.42 V (min = +2.98 V, max = +3.63 V)
Vbat: 3.25 V (min = +2.70 V, max = +3.63 V)
in9: 0.00 V (min = +0.00 V, max = +0.00 V)
in10: 232.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.70 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 1.05 V (min = +0.00 V, max = +0.00 V) ALARM
in14: 1.79 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 1232 RPM (min = 0 RPM)
fan3: 799 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 804 RPM (min = 0 RPM)
SYSTIN: +31.0C (high = +0.0C, hyst = +0.0C) ALARM sensor = thermistor
CPUTIN: +29.5C (high = +80.0C, hyst = +75.0C) sensor = thermistor
AUXTIN0: +88.0C sensor = thermistor
AUXTIN1: +96.0C sensor = thermistor
AUXTIN2: +22.0C sensor = thermistor
AUXTIN3: -22.0C sensor = thermistor
SMBUSMASTER 0: +29.5C
PCH_CHIP_CPU_MAX_TEMP: +0.0C
PCH_CHIP_TEMP: +0.0C
PCH_CPU_TEMP: +0.0C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: 1000.00 mV
Vsoc: 838.00 mV
Tdie: +29.8C
Tctl: +29.8C
Icore: 7.00 A
Isoc: 5.75 A
CPU: AMD Ryzen 3 1300X Quad-Core Processor * 4
Memory: 16 GB
Mobo: Asrock B450M Pro4
GPU: NVIDIA Corporation GP108 [GeForce GT 1030]
HDD: Sabrent NVME 1TB
OS Manjaro
Hi, can you help I am getting random shutdowns? For some time I was running this in an ATX case with an MSI B450 Gaming Plus. I decided to change the case for something smaller and went for an mATX but this meant a change of motherboard so I went for the Asrock. Same chipset. The only other change was a Sabrent 1TB NVME drive.
The BIOS is at default. But I am getting random shutdowns with a flash of a "hardware error". It is too quick to read any more.
I installed "Sensors" and print output. I am concerned that AUXTIN2 is at 96C. I am a bit out of mt depth so I would appreciate some help. I am presuming this is a CPU core.
Code:iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +41.0C
nvme-pci-0100
Adapter: PCI adapter
Composite: +27.9C (low = -0.1C, high = +74.8C)
(crit = +79.8C)
nct6779-isa-0290
Adapter: ISA adapter
Vcore: 336.00 mV (min = +0.00 V, max = +1.74 V)
in1: 328.00 mV (min = +0.00 V, max = +0.00 V) ALARM
AVCC: 3.42 V (min = +2.98 V, max = +3.63 V)
+3.3V: 3.42 V (min = +2.98 V, max = +3.63 V)
in4: 1.88 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 848.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 304.00 mV (min = +0.00 V, max = +0.00 V) ALARM
3VSB: 3.42 V (min = +2.98 V, max = +3.63 V)
Vbat: 3.25 V (min = +2.70 V, max = +3.63 V)
in9: 0.00 V (min = +0.00 V, max = +0.00 V)
in10: 232.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 1.06 V (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.70 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 1.05 V (min = +0.00 V, max = +0.00 V) ALARM
in14: 1.79 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 1232 RPM (min = 0 RPM)
fan3: 799 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 804 RPM (min = 0 RPM)
SYSTIN: +31.0C (high = +0.0C, hyst = +0.0C) ALARM sensor = thermistor
CPUTIN: +29.5C (high = +80.0C, hyst = +75.0C) sensor = thermistor
AUXTIN0: +88.0C sensor = thermistor
AUXTIN1: +96.0C sensor = thermistor
AUXTIN2: +22.0C sensor = thermistor
AUXTIN3: -22.0C sensor = thermistor
SMBUSMASTER 0: +29.5C
PCH_CHIP_CPU_MAX_TEMP: +0.0C
PCH_CHIP_TEMP: +0.0C
PCH_CPU_TEMP: +0.0C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
k10temp-pci-00c3
Adapter: PCI adapter
Vcore: 1000.00 mV
Vsoc: 838.00 mV
Tdie: +29.8C
Tctl: +29.8C
Icore: 7.00 A
Isoc: 5.75 A