SATA 150 instead of 300.
by o770 from LinuxQuestions.org on (#5C7R7)
Hi! What causes the SATA II controller in my PC to downgrade with an SSD?
mintreport
Code:System: Kernel: 5.4.0-26-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: MATE 1.24.0
wm: marco dm: LightDM Distro: Linux Mint 20 Ulyana base: Ubuntu 20.04 focal
Machine: Type: Desktop Mobo: ASUSTeK model: P5VD2-MX v: 1.XX serial: <filter> BIOS: Phoenix
v: ASUS P5VD2-MX Revision 1017 date: 04/30/2007
CPU: Topology: Dual Core model: Intel Core2 6420 bits: 64 type: MCP arch: Core Merom rev: 6
L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 ssse3 vmx bogomips: 8512
Speed: 2128 MHz min/max: 1600/2133 MHz Core speeds (MHz): 1: 2128 2: 2128
Graphics: Device-1: VIA P4M890 [S3 UniChrome Pro] vendor: ASUSTeK driver: N/A bus ID: 01:00.0
chip ID: 1106:3343
Display: x11 server: X.Org 1.20.8 driver: vesa unloaded: fbdev,modesetting
alternate: openchrome compositor: marco resolution: 1280x1024~N/A
OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 20.0.4 compat-v: 3.1
direct render: Yes
Audio: Device-1: Creative Labs EMU10k1 [Sound Blaster Live! Series] driver: snd_emu10k1
v: kernel bus ID: 04:03.0 chip ID: 1102:0002
Sound Server: ALSA v: k5.4.0-26-generic
Network: Device-1: Sundance / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY
driver: sundance v: kernel port: a400 bus ID: 04:04.0 chip ID: 13f0:0200
IF: enp4s4 state: unknown speed: 100 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 119.29 GiB used: 119.5 MiB (0.1%)
ID-1: /dev/sda model: HS-SSD-C100 120G size: 111.79 GiB speed: 1.5 Gb/s
serial: <filter>
ID-2: /dev/sdb type: USB vendor: Generic model: Flash Disk size: 7.50 GiB
serial: <filter>
Partition: ID-1: / size: 1.43 GiB used: 90.1 MiB (6.2%) fs: overlay source: ERR-102
ID-2: /var/log size: 5.43 GiB used: 29.4 MiB (0.5%) fs: ext4 dev: /dev/sdb3
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 chip ID: 1d6b:0002
Device-1: 1-6:4 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage
rev: 2.0 chip ID: 058f:6387
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001
Device-2: 2-2:2 info: HP DeskJet D2460 type: Printer driver: usblp rev: 2.0
chip ID: 03f0:7a04
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001
Device-3: 3-1:2 info: Logitech M105 Optical Mouse type: Mouse
driver: hid-generic,usbhid rev: 2.0 chip ID: 046d:c077
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001
Sensors: System Temperatures: cpu: 32.0 C mobo: 35.0 C
Fan Speeds (RPM): cpu: 2410 case-1: 0
Repos: Active apt repos in: /etc/apt/sources.list
1: deb cdrom:[Linux Mint 20 _Ulyana_ - Release amd64 20200624]/ focal contrib main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com ulyana main upstream import backport #id:linuxmint_main
2: deb http: //archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http: //archive.canonical.com/ubuntu/ focal partner
Info: Processes: 163 Uptime: 17m Memory: 2.86 GiB used: 579.9 MiB (19.8%) Init: systemd
v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Client: Unknown python3.8 client
inxi: 3.0.38# dmesg | grep -i 'ata\|ahci'
Code:[ 0.000000] BIOS-e820: [mem 0x00000000bbee3000-0x00000000bbeeffff] ACPI data
[ 0.030266] NODE_DATA(0) allocated [mem 0xbbeb5000-0xbbedffff]
[ 0.212644] Memory: 2906300K/3078648K available (14339K kernel code, 2397K rwdata, 4948K rodata, 2712K init, 4992K bss, 172348K reserved, 0K cma-reserved)
[ 0.382427] core: PEBS disabled due to CPU errata
[ 0.445628] libata version 3.00 loaded.
[ 1.303609] Write protecting the kernel read-only data: 22528k
[ 1.525227] pata_via 0000:00:0f.1: version 0.3.4
[ 1.526749] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.530062] ahci 0000:03:00.0: version 3.0
[ 1.530465] sata_via 0000:00:0f.0: version 2.6
[ 1.530610] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.533037] scsi host0: pata_via
[ 1.533054] scsi host1: pata_jmicron
[ 1.535578] scsi host2: pata_via
[ 1.535580] scsi host3: pata_jmicron
[ 1.535670] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 1.535672] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 1.535674] ata3: PATA max UDMA/100 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 26
[ 1.535676] ata4: PATA max UDMA/100 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 26
[ 1.540380] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.540384] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.549447] scsi host4: sata_via
[ 1.559555] scsi host6: sata_via
[ 1.559628] ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
[ 1.559630] ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
[ 1.607085] scsi host5: ahci
[ 1.607504] scsi host7: ahci
[ 1.607604] ata7: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe100 irq 27
[ 1.607607] ata8: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe180 irq 27
[ 1.811540] ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.925609] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.083573] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.083850] ata8.00: NCQ Send/Recv Log not supported
[ 2.083853] ata8.00: ATA-10: HS-SSD-C100 120G, V4.15.0, max UDMA/133
[ 2.083856] ata8.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.084164] ata8.00: NCQ Send/Recv Log not supported
[ 2.084168] ata8.00: configured for UDMA/133
[ 2.247707] ata6: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.258608] scsi 7:0:0:0: Direct-Access ATA HS-SSD-C100 120G 5.0 PQ: 0 ANSI: 5
[ 9.738739] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 19.237252] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 19.646600] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 19.675040] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.# lspci -knn
Code:00:00.0 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:0327]
Subsystem: ASUSTeK Computer Inc. P4M890 Host Bridge [1043:81ce]
Kernel driver in use: agpgart-via
00:00.1 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:1327]
00:00.2 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:2327]
00:00.3 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:3327]
00:00.4 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:4327]
00:00.5 PIC [0800]: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller [1106:5327]
00:00.6 Host bridge [0600]: VIA Technologies, Inc. P4M890 Security Device [1106:6327]
00:00.7 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:7327]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198]
00:03.0 PCI bridge [0604]: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller [1106:c327]
Kernel driver in use: pcieport
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. Device [1106:5337] (rev 80)
Subsystem: ASUSTeK Computer Inc. Device [1043:81cf]
Kernel driver in use: sata_via
Kernel modules: sata_via, pata_acpi
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07)
Subsystem: ASUSTeK Computer Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1043:81cf]
Kernel driver in use: pata_via
Kernel modules: pata_via, pata_acpi
00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev a0)
Subsystem: ASUSTeK Computer Inc. VT82xx/62xx UHCI USB 1.1 Controller [1043:81cf]
Kernel driver in use: uhci_hcd
00:10.1 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev a0)
Subsystem: ASUSTeK Computer Inc. VT82xx/62xx UHCI USB 1.1 Controller [1043:81cf]
Kernel driver in use: uhci_hcd
00:10.2 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev a0)
Subsystem: ASUSTeK Computer Inc. VT82xx/62xx UHCI USB 1.1 Controller [1043:81cf]
Kernel driver in use: uhci_hcd
00:10.3 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev a0)
Subsystem: ASUSTeK Computer Inc. VT82xx/62xx UHCI USB 1.1 Controller [1043:81cf]
Kernel driver in use: uhci_hcd
00:10.4 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86)
Subsystem: ASUSTeK Computer Inc. USB 2.0 [1043:81cf]
Kernel driver in use: ehci-pci
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237A PCI to ISA Bridge [1106:3337]
Subsystem: ASUSTeK Computer Inc. VT8237A PCI to ISA Bridge [1043:81cf]
Kernel modules: i2c_viapro
00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller [1106:287e]
Subsystem: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller [1106:337e]
00:13.0 Host bridge [0600]: VIA Technologies, Inc. VT8237A Host Bridge [1106:337b]
00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8237A PCI to PCI Bridge [1106:337a]
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. P4M890 [S3 UniChrome Pro] [1106:3343] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4M890 [S3 UniChrome Pro] [1043:81ce]
Kernel modules: viafb
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02)
Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363]
Kernel driver in use: ahci
Kernel modules: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02)
Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363]
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron, pata_acpi
04:03.0 Multimedia audio controller [0401]: Creative Labs EMU10k1 [Sound Blaster Live! Series] [1102:0002] (rev 07)
Subsystem: Creative Labs SB0100/SB0102 SBLive! 5.1 [1102:8064]
Kernel driver in use: snd_emu10k1
Kernel modules: snd_emu10k1
04:03.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 07)
Subsystem: Creative Labs Gameport Joystick [1102:0020]
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1_gp
04:04.0 Ethernet controller [0200]: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY [13f0:0200] (rev 31)
Subsystem: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY [13f0:0201]
Kernel driver in use: sundance
Kernel modules: sundance# hdparm -I /dev/sda
Code:
/dev/sda:
ATA device, with non-removable media
Model Number: HS-SSD-C100 120G
Serial Number: EDITED
Firmware Revision: V4.15.0
Media Serial Num: EDITED
Media Manufacturer:
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x011b)
Supported: 10 9 8 7 6 5
Likely used: 10
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 234441648
LBA48 user addressable sectors: 234441648
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 114473 MBytes
device size with M = 1000*1000: 120034 MBytes (120 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = ?
Advanced power management level: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
* Software settings preservation
* WRITE BUFFER DMA command
* READ BUFFER DMA command
* Data Set Management TRIM supported (limit 8 blocks)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: EDITED
NAA : EDITED
IEEE OUI : EDITED
Unique ID : EDITED
Checksum: correctHere are the relevant outputs using an HDD.
Code:Drives: Local Storage: total: 156.55 GiB used: 120.8 MiB (0.1%)
ID-1: /dev/sda vendor: Seagate model: ST3160815AS size: 149.05 GiB speed: 3.0 Gb/s
serial: <filter> temp: 43 C
ID-2: /dev/sdb type: USB vendor: Generic model: Flash Disk size: 7.50 GiB
serial: <filter>I only "grepped" ATA here:
Code:[ 1.533297] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.533366] sata_via 0000:00:0f.0: version 2.6
[ 1.533537] pata_via 0000:00:0f.1: version 0.3.4
[ 1.536300] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.547795] scsi host1: sata_via
[ 1.555385] scsi host3: sata_via
[ 1.555456] ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
[ 1.555458] ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
[ 1.594809] scsi host0: pata_jmicron
[ 1.595155] scsi host2: pata_via
[ 1.595418] scsi host5: pata_via
[ 1.595482] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 1.595484] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 1.596047] scsi host4: pata_jmicron
[ 1.596113] ata3: PATA max UDMA/100 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 26
[ 1.596114] ata4: PATA max UDMA/100 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 26
[ 1.799917] ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.881824] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.882594] ata7: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe100 irq 27
[ 1.882597] ata8: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe180 irq 27
[ 2.016051] ata6: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.194631] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.363055] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)Code:/dev/sda:
ATA device, with non-removable media
Model Number: ST3160815AS
Serial Number: EDITED
Firmware Revision: 3.AAC
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = ?
Recommended acoustic management value: 208, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
Device-initiated interface power management
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Attached Thumbnails
mintreport
Code:System: Kernel: 5.4.0-26-generic x86_64 bits: 64 compiler: gcc v: 9.3.0 Desktop: MATE 1.24.0
wm: marco dm: LightDM Distro: Linux Mint 20 Ulyana base: Ubuntu 20.04 focal
Machine: Type: Desktop Mobo: ASUSTeK model: P5VD2-MX v: 1.XX serial: <filter> BIOS: Phoenix
v: ASUS P5VD2-MX Revision 1017 date: 04/30/2007
CPU: Topology: Dual Core model: Intel Core2 6420 bits: 64 type: MCP arch: Core Merom rev: 6
L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 ssse3 vmx bogomips: 8512
Speed: 2128 MHz min/max: 1600/2133 MHz Core speeds (MHz): 1: 2128 2: 2128
Graphics: Device-1: VIA P4M890 [S3 UniChrome Pro] vendor: ASUSTeK driver: N/A bus ID: 01:00.0
chip ID: 1106:3343
Display: x11 server: X.Org 1.20.8 driver: vesa unloaded: fbdev,modesetting
alternate: openchrome compositor: marco resolution: 1280x1024~N/A
OpenGL: renderer: llvmpipe (LLVM 9.0.1 128 bits) v: 3.3 Mesa 20.0.4 compat-v: 3.1
direct render: Yes
Audio: Device-1: Creative Labs EMU10k1 [Sound Blaster Live! Series] driver: snd_emu10k1
v: kernel bus ID: 04:03.0 chip ID: 1102:0002
Sound Server: ALSA v: k5.4.0-26-generic
Network: Device-1: Sundance / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY
driver: sundance v: kernel port: a400 bus ID: 04:04.0 chip ID: 13f0:0200
IF: enp4s4 state: unknown speed: 100 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 119.29 GiB used: 119.5 MiB (0.1%)
ID-1: /dev/sda model: HS-SSD-C100 120G size: 111.79 GiB speed: 1.5 Gb/s
serial: <filter>
ID-2: /dev/sdb type: USB vendor: Generic model: Flash Disk size: 7.50 GiB
serial: <filter>
Partition: ID-1: / size: 1.43 GiB used: 90.1 MiB (6.2%) fs: overlay source: ERR-102
ID-2: /var/log size: 5.43 GiB used: 29.4 MiB (0.5%) fs: ext4 dev: /dev/sdb3
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 chip ID: 1d6b:0002
Device-1: 1-6:4 info: Alcor Micro Flash Drive type: Mass Storage driver: usb-storage
rev: 2.0 chip ID: 058f:6387
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001
Device-2: 2-2:2 info: HP DeskJet D2460 type: Printer driver: usblp rev: 2.0
chip ID: 03f0:7a04
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001
Device-3: 3-1:2 info: Logitech M105 Optical Mouse type: Mouse
driver: hid-generic,usbhid rev: 2.0 chip ID: 046d:c077
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 chip ID: 1d6b:0001
Sensors: System Temperatures: cpu: 32.0 C mobo: 35.0 C
Fan Speeds (RPM): cpu: 2410 case-1: 0
Repos: Active apt repos in: /etc/apt/sources.list
1: deb cdrom:[Linux Mint 20 _Ulyana_ - Release amd64 20200624]/ focal contrib main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com ulyana main upstream import backport #id:linuxmint_main
2: deb http: //archive.ubuntu.com/ubuntu focal main restricted universe multiverse
3: deb http: //archive.ubuntu.com/ubuntu focal-updates main restricted universe multiverse
4: deb http: //archive.ubuntu.com/ubuntu focal-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse
6: deb http: //archive.canonical.com/ubuntu/ focal partner
Info: Processes: 163 Uptime: 17m Memory: 2.86 GiB used: 579.9 MiB (19.8%) Init: systemd
v: 245 runlevel: 5 Compilers: gcc: 9.3.0 alt: 9 Client: Unknown python3.8 client
inxi: 3.0.38# dmesg | grep -i 'ata\|ahci'
Code:[ 0.000000] BIOS-e820: [mem 0x00000000bbee3000-0x00000000bbeeffff] ACPI data
[ 0.030266] NODE_DATA(0) allocated [mem 0xbbeb5000-0xbbedffff]
[ 0.212644] Memory: 2906300K/3078648K available (14339K kernel code, 2397K rwdata, 4948K rodata, 2712K init, 4992K bss, 172348K reserved, 0K cma-reserved)
[ 0.382427] core: PEBS disabled due to CPU errata
[ 0.445628] libata version 3.00 loaded.
[ 1.303609] Write protecting the kernel read-only data: 22528k
[ 1.525227] pata_via 0000:00:0f.1: version 0.3.4
[ 1.526749] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.530062] ahci 0000:03:00.0: version 3.0
[ 1.530465] sata_via 0000:00:0f.0: version 2.6
[ 1.530610] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.533037] scsi host0: pata_via
[ 1.533054] scsi host1: pata_jmicron
[ 1.535578] scsi host2: pata_via
[ 1.535580] scsi host3: pata_jmicron
[ 1.535670] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 1.535672] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 1.535674] ata3: PATA max UDMA/100 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 26
[ 1.535676] ata4: PATA max UDMA/100 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 26
[ 1.540380] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.540384] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.549447] scsi host4: sata_via
[ 1.559555] scsi host6: sata_via
[ 1.559628] ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
[ 1.559630] ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
[ 1.607085] scsi host5: ahci
[ 1.607504] scsi host7: ahci
[ 1.607604] ata7: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe100 irq 27
[ 1.607607] ata8: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe180 irq 27
[ 1.811540] ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.925609] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.083573] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.083850] ata8.00: NCQ Send/Recv Log not supported
[ 2.083853] ata8.00: ATA-10: HS-SSD-C100 120G, V4.15.0, max UDMA/133
[ 2.083856] ata8.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 2.084164] ata8.00: NCQ Send/Recv Log not supported
[ 2.084168] ata8.00: configured for UDMA/133
[ 2.247707] ata6: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.258608] scsi 7:0:0:0: Direct-Access ATA HS-SSD-C100 120G 5.0 PQ: 0 ANSI: 5
[ 9.738739] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 19.237252] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 19.646600] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[ 19.675040] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.# lspci -knn
Code:00:00.0 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:0327]
Subsystem: ASUSTeK Computer Inc. P4M890 Host Bridge [1043:81ce]
Kernel driver in use: agpgart-via
00:00.1 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:1327]
00:00.2 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:2327]
00:00.3 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:3327]
00:00.4 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:4327]
00:00.5 PIC [0800]: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller [1106:5327]
00:00.6 Host bridge [0600]: VIA Technologies, Inc. P4M890 Security Device [1106:6327]
00:00.7 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [1106:7327]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198]
00:03.0 PCI bridge [0604]: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller [1106:c327]
Kernel driver in use: pcieport
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. Device [1106:5337] (rev 80)
Subsystem: ASUSTeK Computer Inc. Device [1043:81cf]
Kernel driver in use: sata_via
Kernel modules: sata_via, pata_acpi
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07)
Subsystem: ASUSTeK Computer Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1043:81cf]
Kernel driver in use: pata_via
Kernel modules: pata_via, pata_acpi
00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev a0)
Subsystem: ASUSTeK Computer Inc. VT82xx/62xx UHCI USB 1.1 Controller [1043:81cf]
Kernel driver in use: uhci_hcd
00:10.1 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev a0)
Subsystem: ASUSTeK Computer Inc. VT82xx/62xx UHCI USB 1.1 Controller [1043:81cf]
Kernel driver in use: uhci_hcd
00:10.2 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev a0)
Subsystem: ASUSTeK Computer Inc. VT82xx/62xx UHCI USB 1.1 Controller [1043:81cf]
Kernel driver in use: uhci_hcd
00:10.3 USB controller [0c03]: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller [1106:3038] (rev a0)
Subsystem: ASUSTeK Computer Inc. VT82xx/62xx UHCI USB 1.1 Controller [1043:81cf]
Kernel driver in use: uhci_hcd
00:10.4 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86)
Subsystem: ASUSTeK Computer Inc. USB 2.0 [1043:81cf]
Kernel driver in use: ehci-pci
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237A PCI to ISA Bridge [1106:3337]
Subsystem: ASUSTeK Computer Inc. VT8237A PCI to ISA Bridge [1043:81cf]
Kernel modules: i2c_viapro
00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller [1106:287e]
Subsystem: VIA Technologies, Inc. VT8237/8251 Ultra VLINK Controller [1106:337e]
00:13.0 Host bridge [0600]: VIA Technologies, Inc. VT8237A Host Bridge [1106:337b]
00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8237A PCI to PCI Bridge [1106:337a]
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc. P4M890 [S3 UniChrome Pro] [1106:3343] (rev 02)
Subsystem: ASUSTeK Computer Inc. P4M890 [S3 UniChrome Pro] [1043:81ce]
Kernel modules: viafb
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02)
Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363]
Kernel driver in use: ahci
Kernel modules: ahci
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 02)
Subsystem: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363]
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron, pata_acpi
04:03.0 Multimedia audio controller [0401]: Creative Labs EMU10k1 [Sound Blaster Live! Series] [1102:0002] (rev 07)
Subsystem: Creative Labs SB0100/SB0102 SBLive! 5.1 [1102:8064]
Kernel driver in use: snd_emu10k1
Kernel modules: snd_emu10k1
04:03.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 07)
Subsystem: Creative Labs Gameport Joystick [1102:0020]
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1_gp
04:04.0 Ethernet controller [0200]: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY [13f0:0200] (rev 31)
Subsystem: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY [13f0:0201]
Kernel driver in use: sundance
Kernel modules: sundance# hdparm -I /dev/sda
Code:
/dev/sda:
ATA device, with non-removable media
Model Number: HS-SSD-C100 120G
Serial Number: EDITED
Firmware Revision: V4.15.0
Media Serial Num: EDITED
Media Manufacturer:
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x011b)
Supported: 10 9 8 7 6 5
Likely used: 10
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 234441648
LBA48 user addressable sectors: 234441648
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 114473 MBytes
device size with M = 1000*1000: 120034 MBytes (120 GB)
cache/buffer size = unknown
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = ?
Advanced power management level: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
* Software settings preservation
* WRITE BUFFER DMA command
* READ BUFFER DMA command
* Data Set Management TRIM supported (limit 8 blocks)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: EDITED
NAA : EDITED
IEEE OUI : EDITED
Unique ID : EDITED
Checksum: correctHere are the relevant outputs using an HDD.
Code:Drives: Local Storage: total: 156.55 GiB used: 120.8 MiB (0.1%)
ID-1: /dev/sda vendor: Seagate model: ST3160815AS size: 149.05 GiB speed: 3.0 Gb/s
serial: <filter> temp: 43 C
ID-2: /dev/sdb type: USB vendor: Generic model: Flash Disk size: 7.50 GiB
serial: <filter>I only "grepped" ATA here:
Code:[ 1.533297] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.533366] sata_via 0000:00:0f.0: version 2.6
[ 1.533537] pata_via 0000:00:0f.1: version 0.3.4
[ 1.536300] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.547795] scsi host1: sata_via
[ 1.555385] scsi host3: sata_via
[ 1.555456] ata5: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
[ 1.555458] ata6: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
[ 1.594809] scsi host0: pata_jmicron
[ 1.595155] scsi host2: pata_via
[ 1.595418] scsi host5: pata_via
[ 1.595482] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 1.595484] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 1.596047] scsi host4: pata_jmicron
[ 1.596113] ata3: PATA max UDMA/100 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 26
[ 1.596114] ata4: PATA max UDMA/100 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 26
[ 1.799917] ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.881824] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.882594] ata7: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe100 irq 27
[ 1.882597] ata8: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe180 irq 27
[ 2.016051] ata6: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.194631] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.363055] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)Code:/dev/sda:
ATA device, with non-removable media
Model Number: ST3160815AS
Serial Number: EDITED
Firmware Revision: 3.AAC
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = ?
Recommended acoustic management value: 208, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
Device-initiated interface power management
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
Attached Thumbnails