No Linux networking with Intel 82574L Gigabit Controller on Intel Desktop Board D2700DC
by hiperbolt from LinuxQuestions.org on (#5CBMC)
I'm trying to get Linux to play nicely with an Intel Desktop Board D2700DC and can't get networking no matter what I do. It works fine with Windows 7 to 10 though.
Here's what I've tried to do:
- Try a LOT of different distro's and kernel versions.
- Install drivers directly from intel's website.
Here's some relevant info (taken from a Mageia 7.1 liveboot environment):
lscpi
Code:(...)
01:00.0 Ethernet Controller: Intel Corporation 82574L Gigabit Network Connectiondmesg | grep e1000e
Code:[ 20.971712] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 20.971716] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 20.972142] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 20.972158] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.
[ 21.025544] e1000e 0000:01:00.0: The NVM Checksum Is Not Valid
[ 21.105907] e1000e: probe of 0000:01:00.0 failed with error -5If you need any more information to diagnose let me know!
I do apologize if this is a repeated question however I couldn't find any question addressing my exact problem, since this is a Linux only issue and not a problem with the hardware.
Thank you.
Here's what I've tried to do:
- Try a LOT of different distro's and kernel versions.
- Install drivers directly from intel's website.
Here's some relevant info (taken from a Mageia 7.1 liveboot environment):
lscpi
Code:(...)
01:00.0 Ethernet Controller: Intel Corporation 82574L Gigabit Network Connectiondmesg | grep e1000e
Code:[ 20.971712] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 20.971716] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 20.972142] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 20.972158] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.
[ 21.025544] e1000e 0000:01:00.0: The NVM Checksum Is Not Valid
[ 21.105907] e1000e: probe of 0000:01:00.0 failed with error -5If you need any more information to diagnose let me know!
I do apologize if this is a repeated question however I couldn't find any question addressing my exact problem, since this is a Linux only issue and not a problem with the hardware.
Thank you.