Unable to use NVMe device on X570-P motherboard; refcount_t and percpu errors
by TheOneKEA from LinuxQuestions.org on (#5CMYA)
I recently plugged a 256GB NVMe drive into the secondary slot on my Asus X570-P motherboard. After partitioning and formatting the drive, any I/O to the drive (including mounting its filesystem) causes the following errors to appear in the dmesg.
Code:[ 121.698761] refcount_t: underflow; use-after-free.
[ 121.698772] WARNING: CPU: 8 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xab/0xf0
[ 121.698773] Modules linked in: rfcomm(E) cmac(E) bnep(E) binfmt_misc(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) btusb(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) crct10dif_pclmul(E) crc32_pclmul(E) rfkill(E) ghash_clmulni_intel(E) jitterentropy_rng(E) aesni_intel(E) crypto_simd(E) cryptd(E) glue_helper(E) efi_pstore(E) drbg(E) ccp(E) ansi_cprng(E) ecdh_generic(E) ecc(E) acpi_cpufreq(E) nft_counter(E) efivarfs(E) crc32c_intel(E)
[ 121.698797] CPU: 8 PID: 0 Comm: swapper/8 Tainted: G E 5.10.6-BET #1
[ 121.698798] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1405 11/19/2019
[ 121.698801] RIP: 0010:refcount_warn_saturate+0xab/0xf0
[ 121.698802] Code: 05 af d2 72 01 01 e8 7a 06 87 00 0f 0b c3 80 3d 9d d2 72 01 00 75 90 48 c7 c7 78 60 44 a6 c6 05 8d d2 72 01 01 e8 5b 06 87 00 <0f> 0b c3 80 3d 7c d2 72 01 00 0f 85 6d ff ff ff 48 c7 c7 d0 60 44
[ 121.698804] RSP: 0018:ffffa9d980394f30 EFLAGS: 00010086
[ 121.698805] RAX: 0000000000000000 RBX: ffff93c68f858900 RCX: 0000000000000027
[ 121.698806] RDX: 0000000000000027 RSI: ffff93cd7ec12e80 RDI: ffff93cd7ec12e88
[ 121.698807] RBP: ffff93c690bde200 R08: 0000000000000000 R09: c0000000ffffdfff
[ 121.698808] R10: ffffa9d980394d50 R11: ffffa9d980394d48 R12: 0000000000000001
[ 121.698809] R13: ffff93c6941f0600 R14: ffff93c68f78fa00 R15: 0000000000000000
[ 121.698810] FS: 0000000000000000(0000) GS:ffff93cd7ec00000(0000) knlGS:0000000000000000
[ 121.698811] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 121.698812] CR2: 00007f332be16000 CR3: 0000000106d4a000 CR4: 0000000000350ee0
[ 121.698813] Call Trace:
[ 121.698815] <IRQ>
[ 121.698818] nvme_irq+0x104/0x190
[ 121.698822] __handle_irq_event_percpu+0x2e/0xd0
[ 121.698824] handle_irq_event_percpu+0x33/0x80
[ 121.698825] handle_irq_event+0x39/0x70
[ 121.698827] handle_edge_irq+0x7c/0x1a0
[ 121.698830] asm_call_irq_on_stack+0x12/0x20
[ 121.698831] </IRQ>
[ 121.698834] common_interrupt+0xd7/0x160
[ 121.698836] asm_common_interrupt+0x1e/0x40
[ 121.698839] RIP: 0010:cpuidle_enter_state+0xd2/0x2e0
[ 121.698840] Code: e8 93 22 6a ff 31 ff 49 89 c5 e8 29 2c 6a ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 c4 01 00 00 31 ff e8 a2 d8 6f ff fb 45 85 f6 <0f> 88 c9 00 00 00 49 63 ce be 68 00 00 00 4c 2b 2c 24 48 89 ca 48
[ 121.698841] RSP: 0018:ffffa9d980177e80 EFLAGS: 00000202
[ 121.698842] RAX: ffff93cd7ec1ce00 RBX: 0000000000000002 RCX: 000000000000001f
[ 121.698843] RDX: 0000001c55cfa428 RSI: 00000000239f541c RDI: 0000000000000000
[ 121.698844] RBP: ffff93c68ea7f400 R08: 0000000000000002 R09: 000000000001c600
[ 121.698845] R10: 00000077d8356efc R11: ffff93cd7ec1be24 R12: ffffffffa66d38e0
[ 121.698846] R13: 0000001c55cfa428 R14: 0000000000000002 R15: 0000000000000000
[ 121.698849] cpuidle_enter+0x30/0x50
[ 121.698852] do_idle+0x24f/0x290
[ 121.698854] cpu_startup_entry+0x1b/0x20
[ 121.698857] start_secondary+0x10b/0x150
[ 121.698859] secondary_startup_64_no_verify+0xb0/0xbb
[ 121.698861] ---[ end trace 3cff32dbce8f0fd6 ]---
[ 151.779331] nvme nvme1: I/O 159 QID 9 timeout, aborting
[ 151.779344] nvme nvme1: I/O 160 QID 9 timeout, aborting
[ 151.779349] nvme nvme1: I/O 161 QID 9 timeout, aborting
[ 151.779354] nvme nvme1: I/O 162 QID 9 timeout, aborting
[ 151.779368] nvme nvme1: Abort status: 0x0
[ 151.779370] nvme nvme1: Abort status: 0x0
[ 151.779371] nvme nvme1: Abort status: 0x0
[ 151.779373] nvme nvme1: Abort status: 0x0
[ 151.779374] nvme nvme1: I/O 166 QID 9 timeout, aborting
[ 151.779378] nvme nvme1: I/O 167 QID 9 timeout, aborting
[ 151.779382] nvme nvme1: I/O 168 QID 9 timeout, aborting
[ 151.779387] nvme nvme1: Abort status: 0x0
[ 151.779389] nvme nvme1: Abort status: 0x0
[ 151.779390] nvme nvme1: I/O 169 QID 9 timeout, aborting
[ 151.779394] nvme nvme1: Abort status: 0x0
[ 151.779396] nvme nvme1: I/O 170 QID 9 timeout, aborting
[ 151.779402] nvme nvme1: Abort status: 0x0
[ 151.779403] nvme nvme1: I/O 171 QID 9 timeout, aborting
[ 151.779408] nvme nvme1: Abort status: 0x0
[ 151.779410] nvme nvme1: I/O 172 QID 9 timeout, aborting
[ 151.779415] nvme nvme1: Abort status: 0x0
[ 151.779416] nvme nvme1: I/O 173 QID 9 timeout, aborting
[ 151.779420] nvme nvme1: Abort status: 0x0
[ 151.779427] nvme nvme1: Abort status: 0x0
[ 181.987372] nvme nvme1: I/O 159 QID 9 timeout, reset controller
[ 182.015464] nvme nvme1: 15/0/0 default/read/poll queues
[ 212.195476] nvme nvme1: I/O 160 QID 9 timeout, disable controller
[ 212.313646] blk_update_request: I/O error, dev nvme1n1, sector 16350 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313653] blk_update_request: I/O error, dev nvme1n1, sector 16093 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313656] blk_update_request: I/O error, dev nvme1n1, sector 15836 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313658] blk_update_request: I/O error, dev nvme1n1, sector 15579 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313660] blk_update_request: I/O error, dev nvme1n1, sector 15322 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313662] blk_update_request: I/O error, dev nvme1n1, sector 15065 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313663] blk_update_request: I/O error, dev nvme1n1, sector 14808 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313665] blk_update_request: I/O error, dev nvme1n1, sector 14551 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313667] blk_update_request: I/O error, dev nvme1n1, sector 14294 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313669] blk_update_request: I/O error, dev nvme1n1, sector 14037 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313702] nvme nvme1: failed to mark controller live state
[ 212.313705] nvme nvme1: Removing after probe failure status: -19
[ 212.323510] Aborting journal on device dm-0-8.
[ 212.323518] Buffer I/O error on dev dm-0, logical block 25198592, lost sync page write
[ 212.323521] JBD2: Error -5 detected when updating journal superblock for dm-0-8.Code:[ 212.344431] percpu ref (hd_struct_free) <= 0 (-28) after switching to atomic
[ 212.344438] WARNING: CPU: 6 PID: 0 at lib/percpu-refcount.c:196 percpu_ref_switch_to_atomic_rcu+0x139/0x140
[ 212.344439] Modules linked in: rfcomm(E) cmac(E) bnep(E) binfmt_misc(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) btusb(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) crct10dif_pclmul(E) crc32_pclmul(E) rfkill(E) ghash_clmulni_intel(E) jitterentropy_rng(E) aesni_intel(E) crypto_simd(E) cryptd(E) glue_helper(E) efi_pstore(E) drbg(E) ccp(E) ansi_cprng(E) ecdh_generic(E) ecc(E) acpi_cpufreq(E) nft_counter(E) efivarfs(E) crc32c_intel(E)
[ 212.344452] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G W E 5.10.6-BET #1
[ 212.344453] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1405 11/19/2019
[ 212.344454] RIP: 0010:percpu_ref_switch_to_atomic_rcu+0x139/0x140
[ 212.344456] Code: 80 3d f9 f0 72 01 00 0f 85 52 ff ff ff 49 8b 54 24 e0 49 8b 74 24 e8 48 c7 c7 88 5f 44 a6 c6 05 db f0 72 01 01 e8 ad 24 87 00 <0f> 0b e9 2e ff ff ff 41 55 49 89 f5 41 54 55 48 89 fd 53 48 83 ec
[ 212.344456] RSP: 0018:ffffa9d98033cf20 EFLAGS: 00010282
[ 212.344457] RAX: 0000000000000000 RBX: 7fffffffffffffe3 RCX: 0000000000000027
[ 212.344457] RDX: 0000000000000027 RSI: ffff93cd7eb92e80 RDI: ffff93cd7eb92e88
[ 212.344458] RBP: 0000360c00c0c328 R08: 0000000000000000 R09: c0000000ffffdfff
[ 212.344458] R10: ffffa9d98033cd40 R11: ffffa9d98033cd38 R12: ffff93c68fb584a0
[ 212.344459] R13: ffffffffa6765f10 R14: 0000000000000202 R15: ffffffffa6606100
[ 212.344460] FS: 0000000000000000(0000) GS:ffff93cd7eb80000(0000) knlGS:0000000000000000
[ 212.344460] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 212.344461] CR2: 000055585e41cc28 CR3: 0000000107fe8000 CR4: 0000000000350ee0
[ 212.344461] Call Trace:
[ 212.344462] <IRQ>
[ 212.344465] rcu_core+0x196/0x420
[ 212.344468] __do_softirq+0xc9/0x214
[ 212.344469] asm_call_irq_on_stack+0x12/0x20
[ 212.344470] </IRQ>
[ 212.344471] do_softirq_own_stack+0x31/0x40
[ 212.344473] irq_exit_rcu+0x9a/0xa0
[ 212.344474] sysvec_apic_timer_interrupt+0x2c/0x80
[ 212.344475] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 212.344477] RIP: 0010:cpuidle_enter_state+0xd2/0x2e0
[ 212.344478] Code: e8 93 22 6a ff 31 ff 49 89 c5 e8 29 2c 6a ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 c4 01 00 00 31 ff e8 a2 d8 6f ff fb 45 85 f6 <0f> 88 c9 00 00 00 49 63 ce be 68 00 00 00 4c 2b 2c 24 48 89 ca 48
[ 212.344478] RSP: 0018:ffffa9d980167e80 EFLAGS: 00000202
[ 212.344479] RAX: ffff93cd7eb9ce00 RBX: 0000000000000001 RCX: 000000000000001f
[ 212.344479] RDX: 0000003170b6b110 RSI: 00000000239f541c RDI: 0000000000000000
[ 212.344480] RBP: ffff93c68ea7e000 R08: 0000000000000002 R09: 000000000001c600
[ 212.344480] R10: 000000c3ae2c0e44 R11: ffff93cd7eb9be24 R12: ffffffffa66d38e0
[ 212.344481] R13: 0000003170b6b110 R14: 0000000000000001 R15: 0000000000000000
[ 212.344483] cpuidle_enter+0x30/0x50
[ 212.344484] do_idle+0x24f/0x290
[ 212.344486] cpu_startup_entry+0x1b/0x20
[ 212.344487] start_secondary+0x10b/0x150
[ 212.344488] secondary_startup_64_no_verify+0xb0/0xbb
[ 212.344489] ---[ end trace 3cff32dbce8f0fd7 ]---After these errors are thrown, the device becomes inaccessible and unmounting its filesystem generates additional errors:
Code:[ 756.097787] Buffer I/O error on dev dm-0, logical block 0, lost sync page write
[ 756.097792] EXT4-fs (dm-0): I/O error while writing superblockThese errors occur with both the 5.9.15 kernel and the 5.10.6 kernel.
Code:[ 121.698761] refcount_t: underflow; use-after-free.
[ 121.698772] WARNING: CPU: 8 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xab/0xf0
[ 121.698773] Modules linked in: rfcomm(E) cmac(E) bnep(E) binfmt_misc(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) btusb(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) crct10dif_pclmul(E) crc32_pclmul(E) rfkill(E) ghash_clmulni_intel(E) jitterentropy_rng(E) aesni_intel(E) crypto_simd(E) cryptd(E) glue_helper(E) efi_pstore(E) drbg(E) ccp(E) ansi_cprng(E) ecdh_generic(E) ecc(E) acpi_cpufreq(E) nft_counter(E) efivarfs(E) crc32c_intel(E)
[ 121.698797] CPU: 8 PID: 0 Comm: swapper/8 Tainted: G E 5.10.6-BET #1
[ 121.698798] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1405 11/19/2019
[ 121.698801] RIP: 0010:refcount_warn_saturate+0xab/0xf0
[ 121.698802] Code: 05 af d2 72 01 01 e8 7a 06 87 00 0f 0b c3 80 3d 9d d2 72 01 00 75 90 48 c7 c7 78 60 44 a6 c6 05 8d d2 72 01 01 e8 5b 06 87 00 <0f> 0b c3 80 3d 7c d2 72 01 00 0f 85 6d ff ff ff 48 c7 c7 d0 60 44
[ 121.698804] RSP: 0018:ffffa9d980394f30 EFLAGS: 00010086
[ 121.698805] RAX: 0000000000000000 RBX: ffff93c68f858900 RCX: 0000000000000027
[ 121.698806] RDX: 0000000000000027 RSI: ffff93cd7ec12e80 RDI: ffff93cd7ec12e88
[ 121.698807] RBP: ffff93c690bde200 R08: 0000000000000000 R09: c0000000ffffdfff
[ 121.698808] R10: ffffa9d980394d50 R11: ffffa9d980394d48 R12: 0000000000000001
[ 121.698809] R13: ffff93c6941f0600 R14: ffff93c68f78fa00 R15: 0000000000000000
[ 121.698810] FS: 0000000000000000(0000) GS:ffff93cd7ec00000(0000) knlGS:0000000000000000
[ 121.698811] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 121.698812] CR2: 00007f332be16000 CR3: 0000000106d4a000 CR4: 0000000000350ee0
[ 121.698813] Call Trace:
[ 121.698815] <IRQ>
[ 121.698818] nvme_irq+0x104/0x190
[ 121.698822] __handle_irq_event_percpu+0x2e/0xd0
[ 121.698824] handle_irq_event_percpu+0x33/0x80
[ 121.698825] handle_irq_event+0x39/0x70
[ 121.698827] handle_edge_irq+0x7c/0x1a0
[ 121.698830] asm_call_irq_on_stack+0x12/0x20
[ 121.698831] </IRQ>
[ 121.698834] common_interrupt+0xd7/0x160
[ 121.698836] asm_common_interrupt+0x1e/0x40
[ 121.698839] RIP: 0010:cpuidle_enter_state+0xd2/0x2e0
[ 121.698840] Code: e8 93 22 6a ff 31 ff 49 89 c5 e8 29 2c 6a ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 c4 01 00 00 31 ff e8 a2 d8 6f ff fb 45 85 f6 <0f> 88 c9 00 00 00 49 63 ce be 68 00 00 00 4c 2b 2c 24 48 89 ca 48
[ 121.698841] RSP: 0018:ffffa9d980177e80 EFLAGS: 00000202
[ 121.698842] RAX: ffff93cd7ec1ce00 RBX: 0000000000000002 RCX: 000000000000001f
[ 121.698843] RDX: 0000001c55cfa428 RSI: 00000000239f541c RDI: 0000000000000000
[ 121.698844] RBP: ffff93c68ea7f400 R08: 0000000000000002 R09: 000000000001c600
[ 121.698845] R10: 00000077d8356efc R11: ffff93cd7ec1be24 R12: ffffffffa66d38e0
[ 121.698846] R13: 0000001c55cfa428 R14: 0000000000000002 R15: 0000000000000000
[ 121.698849] cpuidle_enter+0x30/0x50
[ 121.698852] do_idle+0x24f/0x290
[ 121.698854] cpu_startup_entry+0x1b/0x20
[ 121.698857] start_secondary+0x10b/0x150
[ 121.698859] secondary_startup_64_no_verify+0xb0/0xbb
[ 121.698861] ---[ end trace 3cff32dbce8f0fd6 ]---
[ 151.779331] nvme nvme1: I/O 159 QID 9 timeout, aborting
[ 151.779344] nvme nvme1: I/O 160 QID 9 timeout, aborting
[ 151.779349] nvme nvme1: I/O 161 QID 9 timeout, aborting
[ 151.779354] nvme nvme1: I/O 162 QID 9 timeout, aborting
[ 151.779368] nvme nvme1: Abort status: 0x0
[ 151.779370] nvme nvme1: Abort status: 0x0
[ 151.779371] nvme nvme1: Abort status: 0x0
[ 151.779373] nvme nvme1: Abort status: 0x0
[ 151.779374] nvme nvme1: I/O 166 QID 9 timeout, aborting
[ 151.779378] nvme nvme1: I/O 167 QID 9 timeout, aborting
[ 151.779382] nvme nvme1: I/O 168 QID 9 timeout, aborting
[ 151.779387] nvme nvme1: Abort status: 0x0
[ 151.779389] nvme nvme1: Abort status: 0x0
[ 151.779390] nvme nvme1: I/O 169 QID 9 timeout, aborting
[ 151.779394] nvme nvme1: Abort status: 0x0
[ 151.779396] nvme nvme1: I/O 170 QID 9 timeout, aborting
[ 151.779402] nvme nvme1: Abort status: 0x0
[ 151.779403] nvme nvme1: I/O 171 QID 9 timeout, aborting
[ 151.779408] nvme nvme1: Abort status: 0x0
[ 151.779410] nvme nvme1: I/O 172 QID 9 timeout, aborting
[ 151.779415] nvme nvme1: Abort status: 0x0
[ 151.779416] nvme nvme1: I/O 173 QID 9 timeout, aborting
[ 151.779420] nvme nvme1: Abort status: 0x0
[ 151.779427] nvme nvme1: Abort status: 0x0
[ 181.987372] nvme nvme1: I/O 159 QID 9 timeout, reset controller
[ 182.015464] nvme nvme1: 15/0/0 default/read/poll queues
[ 212.195476] nvme nvme1: I/O 160 QID 9 timeout, disable controller
[ 212.313646] blk_update_request: I/O error, dev nvme1n1, sector 16350 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313653] blk_update_request: I/O error, dev nvme1n1, sector 16093 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313656] blk_update_request: I/O error, dev nvme1n1, sector 15836 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313658] blk_update_request: I/O error, dev nvme1n1, sector 15579 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313660] blk_update_request: I/O error, dev nvme1n1, sector 15322 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313662] blk_update_request: I/O error, dev nvme1n1, sector 15065 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313663] blk_update_request: I/O error, dev nvme1n1, sector 14808 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313665] blk_update_request: I/O error, dev nvme1n1, sector 14551 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313667] blk_update_request: I/O error, dev nvme1n1, sector 14294 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313669] blk_update_request: I/O error, dev nvme1n1, sector 14037 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
[ 212.313702] nvme nvme1: failed to mark controller live state
[ 212.313705] nvme nvme1: Removing after probe failure status: -19
[ 212.323510] Aborting journal on device dm-0-8.
[ 212.323518] Buffer I/O error on dev dm-0, logical block 25198592, lost sync page write
[ 212.323521] JBD2: Error -5 detected when updating journal superblock for dm-0-8.Code:[ 212.344431] percpu ref (hd_struct_free) <= 0 (-28) after switching to atomic
[ 212.344438] WARNING: CPU: 6 PID: 0 at lib/percpu-refcount.c:196 percpu_ref_switch_to_atomic_rcu+0x139/0x140
[ 212.344439] Modules linked in: rfcomm(E) cmac(E) bnep(E) binfmt_misc(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) btusb(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) crct10dif_pclmul(E) crc32_pclmul(E) rfkill(E) ghash_clmulni_intel(E) jitterentropy_rng(E) aesni_intel(E) crypto_simd(E) cryptd(E) glue_helper(E) efi_pstore(E) drbg(E) ccp(E) ansi_cprng(E) ecdh_generic(E) ecc(E) acpi_cpufreq(E) nft_counter(E) efivarfs(E) crc32c_intel(E)
[ 212.344452] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G W E 5.10.6-BET #1
[ 212.344453] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1405 11/19/2019
[ 212.344454] RIP: 0010:percpu_ref_switch_to_atomic_rcu+0x139/0x140
[ 212.344456] Code: 80 3d f9 f0 72 01 00 0f 85 52 ff ff ff 49 8b 54 24 e0 49 8b 74 24 e8 48 c7 c7 88 5f 44 a6 c6 05 db f0 72 01 01 e8 ad 24 87 00 <0f> 0b e9 2e ff ff ff 41 55 49 89 f5 41 54 55 48 89 fd 53 48 83 ec
[ 212.344456] RSP: 0018:ffffa9d98033cf20 EFLAGS: 00010282
[ 212.344457] RAX: 0000000000000000 RBX: 7fffffffffffffe3 RCX: 0000000000000027
[ 212.344457] RDX: 0000000000000027 RSI: ffff93cd7eb92e80 RDI: ffff93cd7eb92e88
[ 212.344458] RBP: 0000360c00c0c328 R08: 0000000000000000 R09: c0000000ffffdfff
[ 212.344458] R10: ffffa9d98033cd40 R11: ffffa9d98033cd38 R12: ffff93c68fb584a0
[ 212.344459] R13: ffffffffa6765f10 R14: 0000000000000202 R15: ffffffffa6606100
[ 212.344460] FS: 0000000000000000(0000) GS:ffff93cd7eb80000(0000) knlGS:0000000000000000
[ 212.344460] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 212.344461] CR2: 000055585e41cc28 CR3: 0000000107fe8000 CR4: 0000000000350ee0
[ 212.344461] Call Trace:
[ 212.344462] <IRQ>
[ 212.344465] rcu_core+0x196/0x420
[ 212.344468] __do_softirq+0xc9/0x214
[ 212.344469] asm_call_irq_on_stack+0x12/0x20
[ 212.344470] </IRQ>
[ 212.344471] do_softirq_own_stack+0x31/0x40
[ 212.344473] irq_exit_rcu+0x9a/0xa0
[ 212.344474] sysvec_apic_timer_interrupt+0x2c/0x80
[ 212.344475] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 212.344477] RIP: 0010:cpuidle_enter_state+0xd2/0x2e0
[ 212.344478] Code: e8 93 22 6a ff 31 ff 49 89 c5 e8 29 2c 6a ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 c4 01 00 00 31 ff e8 a2 d8 6f ff fb 45 85 f6 <0f> 88 c9 00 00 00 49 63 ce be 68 00 00 00 4c 2b 2c 24 48 89 ca 48
[ 212.344478] RSP: 0018:ffffa9d980167e80 EFLAGS: 00000202
[ 212.344479] RAX: ffff93cd7eb9ce00 RBX: 0000000000000001 RCX: 000000000000001f
[ 212.344479] RDX: 0000003170b6b110 RSI: 00000000239f541c RDI: 0000000000000000
[ 212.344480] RBP: ffff93c68ea7e000 R08: 0000000000000002 R09: 000000000001c600
[ 212.344480] R10: 000000c3ae2c0e44 R11: ffff93cd7eb9be24 R12: ffffffffa66d38e0
[ 212.344481] R13: 0000003170b6b110 R14: 0000000000000001 R15: 0000000000000000
[ 212.344483] cpuidle_enter+0x30/0x50
[ 212.344484] do_idle+0x24f/0x290
[ 212.344486] cpu_startup_entry+0x1b/0x20
[ 212.344487] start_secondary+0x10b/0x150
[ 212.344488] secondary_startup_64_no_verify+0xb0/0xbb
[ 212.344489] ---[ end trace 3cff32dbce8f0fd7 ]---After these errors are thrown, the device becomes inaccessible and unmounting its filesystem generates additional errors:
Code:[ 756.097787] Buffer I/O error on dev dm-0, logical block 0, lost sync page write
[ 756.097792] EXT4-fs (dm-0): I/O error while writing superblockThese errors occur with both the 5.9.15 kernel and the 5.10.6 kernel.