Track Your UV Exposure In Real Time With This DIY Meter

Illustration: James Provost

While editing an article about skin cancer early in my career, I learned many not-so-cheerful facts about how ultraviolet light causes molecular disruptions in DNA-how the damage is typically incurred early in life, and how people are particularly susceptible when they live closer to the equator than their forebears, as I do. Since then, I've tended to avoid the sun rather than revel in it. Now, however, with a little bit of home-brewed technological help, I have a device that lets me get the major benefit of solar rays without worrying about ill effects.

The impetus for revisiting my long-standing aversion to the sun was reading about a small-scale study in Spain of patients admitted to a hospital for COVID-19. They were randomly divided into two groups, one of which was administered calcifediol, a prehormone the body normally produces from vitamin D. Of the people in that group, only 2 percent deteriorated to the point of needing intensive care. For those who were not given calcifediol, 50 percent ended up in the ICU.

Doctors have found other evidence, too, that vitamin D might help to protect against COVID. Vitamin D also keeps bones strong, and deficiencies in vitamin D are associated with various diseases, including schizophrenia. While people can get vitamin D from the food they eat, a major source is its synthesis in the skin when exposed to sufficient amounts of ultraviolet light. So, when it comes to getting out in the sun, it seems that you're damned if you do and damned if you don't.

Illustration James Provost Sensor Stack: An Arduino Pro Micro provides the brains of my exposure meter, integrating raw data from a UV sensor that measures the intensity of UV-A and UV-B light. The integrated results are displayed on a monochrome LCD screen originally created for Nokia feature phones.

In an effort to seek the right balance, I hunted for guidance about how much sun would be enough but not too much. A lot of what I read was hopelessly vague, but I eventually stumbled on a scholarly article by Richard L. McKenzie and others that provided concrete guidance. The article told me that, as you might expect, your chance of skin damage scales up with the intensity of UV radiation and duration of exposure, factors that also raise your ability to produce vitamin D. But it also said you can reduce the UV intensity and duration needed to produce the required amount of vitamin D simply by exposing more skin area.

Just walking the dog in my skivvies didn't seem a reasonable strategy, though. I figured I needed a quantitative-and portable-way to gauge whether I was getting enough sunlight to produce a healthy amount of vitamin D without getting burned. While you can find generalized charts that provide estimates of what is called the UV index for your latitude at different times of the day and year, I wanted to know exactly what the prevailing UV index was as I moved in and out of shadows and clouds passed overhead.

The solution involved a US $7.50 UV-sensor board I bought from SparkFun. It measures both UV-A and UV-B radiation (although only the latter wavelength range is involved in the production of vitamin D). I wired this sensor to an $18 Arduino Pro Micro, which integrated the sensor readings to measure my total exposure. A diminutive $10 graphical display connected to the Pro Micro shows at a glance when I've likely taken in enough sunlight to get my daily dose of vitamin D and when my exposure might be approaching the danger level.

Illustration James Provost Burn Notice: The red area in the chart (adapted from a paper by Richard L. McKenzie et al.) shows when sunburn will occur for a given UV index (plotted horizontally) and amount of time (plotted vertically). People with lighter skin will burn more quickly than people with darker skin. The green line shows the amount of exposure required for people to produce sufficient vitamin D while exposing only face and hands; the blue line represents the threshold when exposing the full body.

The packaging is less elegant than I would have liked, but has the advantage of being light: I attached the three boards together and wrapped the ensemble with duct tape, cutting a small window in the tape for the sensor. The contraption is powered by a palm-sized lithium-ion battery pack. The first pack I bought for this purpose proved a bust because the power draw of my electronics was so low that the pack would quickly turn itself off. So I replaced it with a pack that boasted an always-on feature.

I programmed the Arduino to graphically display my exposure using a scale of zero to 200 accumulated UV index-minutes." This a unit of convenience I invented to summarize a key chart in the McKenzie paper, a version of which is shown here.

As the chart shows, with full-body exposure, about 10 UV index-minutes should be sufficient for someone like me with Type II" skin, which burns easily, to produce my daily quota of vitamin D. I'm more the baggies type than the Speedo type, so figured my personal full-body exposure" value was probably something like 20 UV index-minutes. And with only hands and face exposed, I'd likely need from 100 to 150 UV index-minutes to produce my daily quota of vitamin D. The danger level for someone with my skin type with any amount of skin exposed comes at about 180 UV index-minutes. So I had the Arduino plot minimum and maximum lines at the appropriate levels.

People with darker skin would, of course, need to adjust these numbers upward, as the chart shows. According to the publication I was using for guidance, those with a Mediterranean skin type (Type IV) should double the values I adopted. People with skin that is darker still should use values five to 10 times as large.

While I've yet to figure out how useful these integrated-exposure results will be, just having a gizmo that can tell you the instantaneous UV index is very helpful in gauging whether there's even a possibility of getting enough vitamin D. When the UV index is below 1.0 outside, forget it-I'd get a burn (or more likely the sun would set!) before my skin could produce enough.

At the time of this writing, in early March, most days offer a slim chance of burning. But I am looking forward to the coming of spring, when the sun passes over the equator, the dogwood begins to bloom, and I can transition from chewing on vitamin-D gummies to using an Arduino-based UV-index meter to stay healthy.

This article appears in the April 2021 print issue as Don't Get Burned!"