SSHFS fails to connect after years of faithful service
by Mik3e from LinuxQuestions.org on (#5JBWX)
There are two computers and they are both dual-boot with linux distros. For several years, possibly ten, sshfs was successfully used to connect them, and then, about a month ago, something went sideways.
Firewalls are disabled, and each distro has a static ip: 192.168.10.11-16.
Typical terminal command: sshfs 192.168.10.14:/media/Wren /media/Remote
Result, system hangs until it times out.
Most common debug output:
ssh: connect to host 192.168.10.1X port 22: Connection timed out
read: Connection reset by peer
Computer 1 LMDE/Cinnamon does not connect Computer 2 Mint/xfce
Computer 2 Mint/xfce connects Computer 1 LMDE/Cinnamon
Computer 1 Mint/Mate does not connect Computer 2 Mint/xfce
Computer 2 Mint/xfce does not connect Computer 1 Mint/Mate
Computer 1 Mint/Mate connected Computer 2 MX/xfce once, then failed
Debug output:
ssh: connect to host 192.168.10.14 port 22: Connection refused
read: Connection reset by peer
Computer 2 MX/xfce does not connect Computer 1 Mint/Mate
Computer 1 LMDE/Cinnamon does not connect Computer 2 MX/xfce
Computer 2 MX/xfce connects Computer 1 LMDE/Cinnamon
syslogs show:
May 27 12:08:38 Magpie systemd[1]: media-Remote.mount: Succeeded.
May 27 12:08:38 Magpie systemd[906]: media-Remote.mount: Succeeded.
Have tried to no effect:
ssh-keygen -f "/home/mike/.ssh/known_hosts" -R "192.168.10.1X"
Have purged and reinstalled ssh and sshfs in Mint/Mate.
Have tried ssh:// ... in Caja and Nemo to no effect, host could not be found.
Have pinged successfully in several directions.
Samba is installed in MX only, and certainly not setup. Some Samba support files are installed as part of the default installations.
Computer 1:
Code:LMDE cinnamon
2021-05-11
LMDE 4 (debbie)
--inxi -v7 -Z -c0--
System:
Host: raven Kernel: 4.19.0-16-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
Desktop: Cinnamon 4.8.6 wm: muffin 4.8.1 dm: LightDM 1.26.0
Distro: LMDE 4 Debbie base: Debian 10.2 buster
Machine:
Type: Desktop System: Gigabyte Tecohnology product: H61M-DS2 v: N/A
serial: <root required> Chassis: type: 3 serial: <root required>
Mobo: INTEL model: H61M-DS2 v: x.x serial: <root required>
BIOS: American Megatrends v: F4 date: 12/21/2011
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M325
serial: 400a-bb-e2-16-ce charge: 55% (should be ignored) rechargeable: yes
status: Discharging
Memory:
RAM: total: 3.75 GiB used: 802.0 MiB (20.9%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Pentium G630 bits: 64 type: MCP
arch: Sandy Bridge rev: 7 L2 cache: 3072 KiB bogomips: 10775
Speed: 1597 MHz min/max: 1600/2700 MHz Core speeds (MHz): 1: 1596 2: 1596
Flags: acpi aperfmperf apic arat arch_perfmon bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept est
flexpriority flush_l1d fpu fxsr ht ibpb ibrs lahf_lm lm mca mce md_clear
mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm
pebs pge pln pni popcnt pse pse36 pti pts rdtscp rep_good sep ss ssbd sse
sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_deadline_timer vme vmx vnmi vpid xsave xsaveopt xtopology xtpr
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
vendor: Gigabyte driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0102
Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa
resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel Sandybridge Desktop v: 3.3 Mesa 18.3.6
compat-v: 3.0 direct render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: Gigabyte driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:1c20
Sound Server: ALSA v: k4.19.0-16-amd64
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel port: e000 bus ID: 02:00.0
chip ID: 10ec:8168
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: 50:e5:e5:e5:e5:2a
IP v4: 192.168.10.15/24 type: noprefixroute scope: global
broadcast: 192.168.10.255
IP v6: fe80::d12f:d12f:d12f:f205/64 type: noprefixroute scope: link
WAN IP: 67.40.201.25
Drives:
Local Storage: total: 931.52 GiB used: 198.52 GiB (21.3%)
ID-1: /dev/sda vendor: Samsung model: SSD 840 EVO 500GB size: 465.76 GiB
speed: 3.0 Gb/s serial: S1DHNSBF640724R rev: BB6Q scheme: MBR
ID-2: /dev/sdb vendor: Western Digital model: WD5000AAKX-001CA0
size: 465.76 GiB speed: 3.0 Gb/s serial: WD-WMAYUR501313 rev: 1H15
scheme: MBR
Optical-1: /dev/sr0 vendor: ATAPI model: iHAS324 B rev: AL1B
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 19.10 GiB used: 6.02 GiB (31.5%) fs: ext4 dev: /dev/sda3
label: Raven uuid: 6bd87bde-9d5a-4dd6-9c3b-1f09f2013421
ID-2: /home size: 9.55 GiB used: 2.04 GiB (21.4%) fs: ext4 dev: /dev/sda7
label: Curlew uuid: 29296fce-9769-491a-93f7-a3c30db72001
ID-3: /media/Avocet size: 454.49 GiB used: 190.47 GiB (41.9%) fs: ext4
dev: /dev/sdb1 label: Avocet uuid: deae274d-0ebd-41e2-9229-2215400caa8b
ID-4: swap-1 size: 3.90 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdb5
label: N/A uuid: 7f0c5891-593f-4169-a5c0-189a4434f2e7
Unmounted:
ID-1: /dev/sda1 size: 19.53 GiB fs: ext4 label: Magpie
uuid: 709106a0-94e6-40c5-9c66-42b6ede6fab1
ID-2: /dev/sda2 size: 19.53 GiB fs: ext4 label: Shrike
uuid: a5aa87fc-2a72-45a6-adf6-d4f9d16a9579
ID-3: /dev/sda4 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-4: /dev/sda5 size: 9.77 GiB fs: ext4 label: Whimbrel
uuid: 19ddc2ff-0c90-4e70-8415-da36474a7322
ID-5: /dev/sda6 size: 9.77 GiB fs: ext4 label: Godwit
uuid: f2a68d32-fc98-4907-bdf0-ddda7d9c385f
ID-6: /dev/sda8 size: 377.87 GiB fs: ext4 label: Sandhill
uuid: 3c8682b1-06a6-46d3-8b38-fcec6c3d2195
ID-7: /dev/sdb2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip ID: 8087:0024
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 8087:0024
Device-1: 2-1.1:3 info: Logitech Unifying Receiver
type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b
Device-2: 2-1.5:4 info: HP DeskJet 930c type: Printer driver: usblp
interfaces: 1 rev: 1.0 speed: 12 Mb/s chip ID: 03f0:1204
serial: MX07J1S00XJJ
Device-3: 2-1.6:5 info: Chicony type: Keyboard driver: hid-generic,usbhid
interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0400
Sensors:
System Temperatures: cpu: 32.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 166 Uptime: 22m Init: systemd v: 241 runlevel: 5 Compilers:
gcc: 8.3.0 alt: 8 Shell: sysdata.scr running in: gnome-terminal
inxi: 3.0.32
--wmctrl -m--
Name: Mutter (Muffin)
--XDG_SESSION_TYPE--
x11
--ip -s address--
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
RX: bytes packets errors dropped overrun mcast
6798 86 0 0 0 0
TX: bytes packets errors dropped carrier collsns
6798 86 0 0 0 0
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 50:e5:e5:e5:e5:2a brd ff:ff:ff:ff:ff:ff
inet 192.168.10.15/24 brd 192.168.10.255 scope global noprefixroute enp2s0
valid_lft forever preferred_lft forever
inet6 fe80::d12f:d12f:d12f:f205/64 scope link noprefixroute
valid_lft forever preferred_lft forever
RX: bytes packets errors dropped overrun mcast
7370 81 0 0 0 5
TX: bytes packets errors dropped carrier collsns
15098 151 0 0 0 0
--ip route--
default via 192.168.10.1 dev enp2s0 proto static metric 100
169.254.0.0/16 dev enp2s0 scope link metric 1000
192.168.10.0/24 dev enp2s0 proto kernel scope link src 192.168.10.15 metric 100
--route -n--
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.10.1 0.0.0.0 UG 100 0 0 enp2s0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 enp2s0
192.168.10.0 0.0.0.0 255.255.255.0 U 100 0 0 enp2s0
--inxi -rc0--
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://muug.ca/mirror/linuxmint/packages debbie main upstream import backport
2: deb http://mirrors.ocf.berkeley.edu/debian/ buster main contrib non-free
3: deb http://mirrors.ocf.berkeley.edu/debian/ buster-updates main contrib non-free
4: deb http://security.debian.org/ buster/updates main contrib non-free
5: deb http://mirrors.ocf.berkeley.edu/debian/ buster-backports main contrib non-free
--versions--
GNU bash, version 5.0.3(1)-release (x86_64-pc-linux-gnu)
BleachBit version 2.0
conky 1.10.8
Diodon 1.8.0
fdisk from util-linux 2.33.1
FeatherNotes 0.4.6
Mozilla Firefox 78.10.1esr
GNU Image Manipulation Program version 2.10.8
# GNOME Terminal 3.30.2 using VTE 0.54.2 +GNUTLS
GnuCash 3.4
grep (GNU grep) 3.3
Inkscape 0.92.4 (5da689c313, 2019-01-14)
inxi 3.0.32-00 (2019-02-07)
keepassxc 2.3.4
LibreOffice 6.1.5.2 10(Build:2)
logrotate 3.14.0
mintupdate 5.7.3
pkexec version 0.105
Python 3.7.3
Quod Libet 4.2.1
sed (GNU sed) 4.7
SSHFS version 2.10.0
Sudo version 1.8.27
Thunderbird 78.10.0
xed - Version 2.8.4
Xpad 5.3
yad 0.40.0 (GTK+ 3.24.5)
--sensors--
acpitz-acpi-0
Adapter: ACPI interface
temp1: +27.8C (crit = +96.0C)
temp2: +29.8C (crit = +96.0C)Computer 2
Code:MX lightdm-xsession
2021-05-27
mike
--inxi -v7 -Z -c0--
System:
Host: Dipper Kernel: 4.19.0-16-amd64 x86_64 bits: 64 compiler: gcc
v: 8.3.0 Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4
dm: LightDM 1.26.0 Distro: MX-19.4_x64 patito feo November 11 2020
base: Debian GNU/Linux 10 (buster)
Machine:
Type: Desktop Mobo: EVGA model: 111-CD-E630 v: Rev 1.xx
serial: <root required> BIOS: American Megatrends v: 0301 date: 01/20/2010
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M325
serial: 400a-2b-56-14-89 charge: 55% (should be ignored) rechargeable: yes
status: Discharging
Memory:
RAM: total: 3.60 GiB used: 378.3 MiB (10.3%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Core i3 530 bits: 64 type: MT MCP
arch: Nehalem rev: 2 L2 cache: 4096 KiB bogomips: 23407
Speed: 1462 MHz min/max: 1200/2933 MHz Core speeds (MHz): 1: 1463 2: 1463
3: 1463 4: 1464
Flags: acpi aperfmperf apic arat arch_perfmon bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts ept est
flexpriority flush_l1d fpu fxsr ht ibpb ibrs lahf_lm lm mca mce mmx
monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pdcm pebs pge pni popcnt
pse pse36 pti rdtscp rep_good sep ss ssbd sse sse2 sse4_1 sse4_2 ssse3
stibp syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr
Graphics:
Device-1: Intel Core Processor Integrated Graphics vendor: Pegatron
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0042
Display: x11 server: X.Org 1.20.4 driver: intel resolution: 1680x1050~60Hz
OpenGL: renderer: Mesa DRI Intel Ironlake Desktop v: 2.1 Mesa 18.3.6
direct render: Yes
Audio:
Device-1: Intel 5 Series/3400 Series High Definition Audio
vendor: Pegatron driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:3b56
Sound Server: ALSA v: k4.19.0-16-amd64
Network:
Device-1: Intel 82578DC Gigabit Network vendor: Pegatron driver: e1000e
v: 3.2.6-k port: e880 bus ID: 00:19.0 chip ID: 8086:10f0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: e0:cb:cb:cb:cb:d5
IP v4: 192.168.10.14/24 type: noprefixroute scope: global
broadcast: 192.168.10.255
IP v6: fe80::cb:cb:cb:d59c/64 type: noprefixroute scope: link
WAN IP: 67.42.94.176
Drives:
Local Storage: total: 465.76 GiB used: 183.70 GiB (39.4%)
ID-1: /dev/sda vendor: Western Digital model: WD5000AAKX-00ERMA0
size: 465.76 GiB speed: 3.0 Gb/s rotation: 7200 rpm
serial: WD-WCC2EUD14009 rev: 1H15 scheme: MBR
Optical-1: /dev/sr0 vendor: ATAPI model: iHAS324 Y rev: BL1W
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 19.10 GiB used: 6.00 GiB (31.4%) fs: ext4 dev: /dev/sda4
label: Nuthatch uuid: 8228a13c-4522-4e4c-8b69-857a5f3e6f90
ID-2: /home size: 9.55 GiB used: 257.8 MiB (2.6%) fs: ext4 dev: /dev/sda7
label: Verdin uuid: 37c6a987-a5b4-40db-ad5a-c915e16eea8e
ID-3: /media/Wren size: 367.23 GiB used: 177.46 GiB (48.3%) fs: ext4
dev: /dev/sda8 label: Wren uuid: 53fdcead-952b-4f13-a011-98fe972019cb
ID-4: swap-1 size: 4.66 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5
label: N/A uuid: e5b4a468-659f-4bce-b498-c86417dc7532
Unmounted:
ID-1: /dev/sda1 size: 19.53 GiB fs: ext4 label: Dipper
uuid: bfee624a-201c-4bf2-a751-598598690883
ID-2: /dev/sda2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-3: /dev/sda3 size: 19.53 GiB fs: ext4 label: Waxwing
uuid: 6dec0995-1537-4468-9040-639ddf24d48d
ID-4: /dev/sda6 size: 9.77 GiB fs: ext4 label: Crossbill
uuid: 1d931830-f00d-4573-b21c-064d1cb96548
ID-5: /dev/sda9 size: 9.76 GiB fs: ext4 label: Auklet
uuid: 4f6529a8-10eb-4642-9d1b-53b1c448fb4b
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 3-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 3-4:2 info: Genesys Logic USB 2.0 Multislot Card Reader/Writer
type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0
speed: 480 Mb/s chip ID: 05e3:0716 serial: 000000009744
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Device-2: 8-2:2 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
chip ID: 046d:c52b
Sensors:
System Temperatures: cpu: 27.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 189 Uptime: 1m Init: SysVinit v: 2.93 runlevel: 5 default: 5
Compilers: gcc: 8.3.0 alt: 8 Shell: sysdata.scr running in: gnome-terminal
inxi: 3.0.36
--wmctrl -m--
Name: Xfwm4
--ip -s address--
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
RX: bytes packets errors dropped overrun mcast
1514 20 0 0 0 0
TX: bytes packets errors dropped carrier collsns
1514 20 0 0 0 0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether e0:cb:cb:cb:cb:d5 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.14/24 brd 192.168.10.255 scope global noprefixroute eth0
valid_lft forever preferred_lft forever
inet6 fe80::cb:cb:cb:d59c/64 scope link noprefixroute
valid_lft forever preferred_lft forever
RX: bytes packets errors dropped overrun mcast
6788 59 0 0 0 13
TX: bytes packets errors dropped carrier collsns
10457 88 0 0 0 0
--ip route--
default via 192.168.10.1 dev eth0 proto static metric 100
192.168.10.0/24 dev eth0 proto kernel scope link src 192.168.10.14 metric 100
--route -n--
--inxi -rc0--
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian buster main contrib non-free
2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ buster main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
--versions--
GNU bash, version 5.0.3(1)-release (x86_64-pc-linux-gnu)
BleachBit version 4.1.0
conky 1.10.8
fdisk from util-linux 2.33.1
FeatherNotes 0.7.0
Mozilla Firefox 88.0.1
GNU Image Manipulation Program version 2.10.12
# GNOME Terminal 3.30.2 using VTE 0.54.2 +GNUTLS
grep (GNU grep) 3.3
inxi 3.0.36-00 (2019-08-14)
LibreOffice 6.1.5.2 10(Build:2)
logrotate 3.14.0
pkexec version 0.105
Python 3.7.3
Quod Libet 4.2.1
sed (GNU sed) 4.7
SSHFS version 2.10.0
Sudo version 1.8.27
thunar 1.8.14 (Xfce 4.14)
Thunderbird 68.12.0
yad 0.40.0 (GTK+ 3.24.5)
--sensors--
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +28.0C (high = +89.0C, crit = +105.0C)
Core 2: +32.0C (high = +89.0C, crit = +105.0C)Where to turn?
Mike
Firewalls are disabled, and each distro has a static ip: 192.168.10.11-16.
Typical terminal command: sshfs 192.168.10.14:/media/Wren /media/Remote
Result, system hangs until it times out.
Most common debug output:
ssh: connect to host 192.168.10.1X port 22: Connection timed out
read: Connection reset by peer
Computer 1 LMDE/Cinnamon does not connect Computer 2 Mint/xfce
Computer 2 Mint/xfce connects Computer 1 LMDE/Cinnamon
Computer 1 Mint/Mate does not connect Computer 2 Mint/xfce
Computer 2 Mint/xfce does not connect Computer 1 Mint/Mate
Computer 1 Mint/Mate connected Computer 2 MX/xfce once, then failed
Debug output:
ssh: connect to host 192.168.10.14 port 22: Connection refused
read: Connection reset by peer
Computer 2 MX/xfce does not connect Computer 1 Mint/Mate
Computer 1 LMDE/Cinnamon does not connect Computer 2 MX/xfce
Computer 2 MX/xfce connects Computer 1 LMDE/Cinnamon
syslogs show:
May 27 12:08:38 Magpie systemd[1]: media-Remote.mount: Succeeded.
May 27 12:08:38 Magpie systemd[906]: media-Remote.mount: Succeeded.
Have tried to no effect:
ssh-keygen -f "/home/mike/.ssh/known_hosts" -R "192.168.10.1X"
Have purged and reinstalled ssh and sshfs in Mint/Mate.
Have tried ssh:// ... in Caja and Nemo to no effect, host could not be found.
Have pinged successfully in several directions.
Samba is installed in MX only, and certainly not setup. Some Samba support files are installed as part of the default installations.
Computer 1:
Code:LMDE cinnamon
2021-05-11
LMDE 4 (debbie)
--inxi -v7 -Z -c0--
System:
Host: raven Kernel: 4.19.0-16-amd64 x86_64 bits: 64 compiler: gcc v: 8.3.0
Desktop: Cinnamon 4.8.6 wm: muffin 4.8.1 dm: LightDM 1.26.0
Distro: LMDE 4 Debbie base: Debian 10.2 buster
Machine:
Type: Desktop System: Gigabyte Tecohnology product: H61M-DS2 v: N/A
serial: <root required> Chassis: type: 3 serial: <root required>
Mobo: INTEL model: H61M-DS2 v: x.x serial: <root required>
BIOS: American Megatrends v: F4 date: 12/21/2011
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M325
serial: 400a-bb-e2-16-ce charge: 55% (should be ignored) rechargeable: yes
status: Discharging
Memory:
RAM: total: 3.75 GiB used: 802.0 MiB (20.9%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Pentium G630 bits: 64 type: MCP
arch: Sandy Bridge rev: 7 L2 cache: 3072 KiB bogomips: 10775
Speed: 1597 MHz min/max: 1600/2700 MHz Core speeds (MHz): 1: 1596 2: 1596
Flags: acpi aperfmperf apic arat arch_perfmon bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept est
flexpriority flush_l1d fpu fxsr ht ibpb ibrs lahf_lm lm mca mce md_clear
mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pcid pclmulqdq pdcm
pebs pge pln pni popcnt pse pse36 pti pts rdtscp rep_good sep ss ssbd sse
sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc
tsc_deadline_timer vme vmx vnmi vpid xsave xsaveopt xtopology xtpr
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
vendor: Gigabyte driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0102
Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa
resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel Sandybridge Desktop v: 3.3 Mesa 18.3.6
compat-v: 3.0 direct render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: Gigabyte driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:1c20
Sound Server: ALSA v: k4.19.0-16-amd64
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel port: e000 bus ID: 02:00.0
chip ID: 10ec:8168
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: 50:e5:e5:e5:e5:2a
IP v4: 192.168.10.15/24 type: noprefixroute scope: global
broadcast: 192.168.10.255
IP v6: fe80::d12f:d12f:d12f:f205/64 type: noprefixroute scope: link
WAN IP: 67.40.201.25
Drives:
Local Storage: total: 931.52 GiB used: 198.52 GiB (21.3%)
ID-1: /dev/sda vendor: Samsung model: SSD 840 EVO 500GB size: 465.76 GiB
speed: 3.0 Gb/s serial: S1DHNSBF640724R rev: BB6Q scheme: MBR
ID-2: /dev/sdb vendor: Western Digital model: WD5000AAKX-001CA0
size: 465.76 GiB speed: 3.0 Gb/s serial: WD-WMAYUR501313 rev: 1H15
scheme: MBR
Optical-1: /dev/sr0 vendor: ATAPI model: iHAS324 B rev: AL1B
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 19.10 GiB used: 6.02 GiB (31.5%) fs: ext4 dev: /dev/sda3
label: Raven uuid: 6bd87bde-9d5a-4dd6-9c3b-1f09f2013421
ID-2: /home size: 9.55 GiB used: 2.04 GiB (21.4%) fs: ext4 dev: /dev/sda7
label: Curlew uuid: 29296fce-9769-491a-93f7-a3c30db72001
ID-3: /media/Avocet size: 454.49 GiB used: 190.47 GiB (41.9%) fs: ext4
dev: /dev/sdb1 label: Avocet uuid: deae274d-0ebd-41e2-9229-2215400caa8b
ID-4: swap-1 size: 3.90 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sdb5
label: N/A uuid: 7f0c5891-593f-4169-a5c0-189a4434f2e7
Unmounted:
ID-1: /dev/sda1 size: 19.53 GiB fs: ext4 label: Magpie
uuid: 709106a0-94e6-40c5-9c66-42b6ede6fab1
ID-2: /dev/sda2 size: 19.53 GiB fs: ext4 label: Shrike
uuid: a5aa87fc-2a72-45a6-adf6-d4f9d16a9579
ID-3: /dev/sda4 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-4: /dev/sda5 size: 9.77 GiB fs: ext4 label: Whimbrel
uuid: 19ddc2ff-0c90-4e70-8415-da36474a7322
ID-5: /dev/sda6 size: 9.77 GiB fs: ext4 label: Godwit
uuid: f2a68d32-fc98-4907-bdf0-ddda7d9c385f
ID-6: /dev/sda8 size: 377.87 GiB fs: ext4 label: Sandhill
uuid: 3c8682b1-06a6-46d3-8b38-fcec6c3d2195
ID-7: /dev/sdb2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip ID: 8087:0024
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 8087:0024
Device-1: 2-1.1:3 info: Logitech Unifying Receiver
type: Keyboard,Mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
rev: 2.0 speed: 12 Mb/s chip ID: 046d:c52b
Device-2: 2-1.5:4 info: HP DeskJet 930c type: Printer driver: usblp
interfaces: 1 rev: 1.0 speed: 12 Mb/s chip ID: 03f0:1204
serial: MX07J1S00XJJ
Device-3: 2-1.6:5 info: Chicony type: Keyboard driver: hid-generic,usbhid
interfaces: 1 rev: 2.0 speed: 1.5 Mb/s chip ID: 04f2:0400
Sensors:
System Temperatures: cpu: 32.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 166 Uptime: 22m Init: systemd v: 241 runlevel: 5 Compilers:
gcc: 8.3.0 alt: 8 Shell: sysdata.scr running in: gnome-terminal
inxi: 3.0.32
--wmctrl -m--
Name: Mutter (Muffin)
--XDG_SESSION_TYPE--
x11
--ip -s address--
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
RX: bytes packets errors dropped overrun mcast
6798 86 0 0 0 0
TX: bytes packets errors dropped carrier collsns
6798 86 0 0 0 0
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 50:e5:e5:e5:e5:2a brd ff:ff:ff:ff:ff:ff
inet 192.168.10.15/24 brd 192.168.10.255 scope global noprefixroute enp2s0
valid_lft forever preferred_lft forever
inet6 fe80::d12f:d12f:d12f:f205/64 scope link noprefixroute
valid_lft forever preferred_lft forever
RX: bytes packets errors dropped overrun mcast
7370 81 0 0 0 5
TX: bytes packets errors dropped carrier collsns
15098 151 0 0 0 0
--ip route--
default via 192.168.10.1 dev enp2s0 proto static metric 100
169.254.0.0/16 dev enp2s0 scope link metric 1000
192.168.10.0/24 dev enp2s0 proto kernel scope link src 192.168.10.15 metric 100
--route -n--
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.10.1 0.0.0.0 UG 100 0 0 enp2s0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 enp2s0
192.168.10.0 0.0.0.0 255.255.255.0 U 100 0 0 enp2s0
--inxi -rc0--
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http://muug.ca/mirror/linuxmint/packages debbie main upstream import backport
2: deb http://mirrors.ocf.berkeley.edu/debian/ buster main contrib non-free
3: deb http://mirrors.ocf.berkeley.edu/debian/ buster-updates main contrib non-free
4: deb http://security.debian.org/ buster/updates main contrib non-free
5: deb http://mirrors.ocf.berkeley.edu/debian/ buster-backports main contrib non-free
--versions--
GNU bash, version 5.0.3(1)-release (x86_64-pc-linux-gnu)
BleachBit version 2.0
conky 1.10.8
Diodon 1.8.0
fdisk from util-linux 2.33.1
FeatherNotes 0.4.6
Mozilla Firefox 78.10.1esr
GNU Image Manipulation Program version 2.10.8
# GNOME Terminal 3.30.2 using VTE 0.54.2 +GNUTLS
GnuCash 3.4
grep (GNU grep) 3.3
Inkscape 0.92.4 (5da689c313, 2019-01-14)
inxi 3.0.32-00 (2019-02-07)
keepassxc 2.3.4
LibreOffice 6.1.5.2 10(Build:2)
logrotate 3.14.0
mintupdate 5.7.3
pkexec version 0.105
Python 3.7.3
Quod Libet 4.2.1
sed (GNU sed) 4.7
SSHFS version 2.10.0
Sudo version 1.8.27
Thunderbird 78.10.0
xed - Version 2.8.4
Xpad 5.3
yad 0.40.0 (GTK+ 3.24.5)
--sensors--
acpitz-acpi-0
Adapter: ACPI interface
temp1: +27.8C (crit = +96.0C)
temp2: +29.8C (crit = +96.0C)Computer 2
Code:MX lightdm-xsession
2021-05-27
mike
--inxi -v7 -Z -c0--
System:
Host: Dipper Kernel: 4.19.0-16-amd64 x86_64 bits: 64 compiler: gcc
v: 8.3.0 Desktop: Xfce 4.14.2 tk: Gtk 3.24.5 info: xfce4-panel wm: xfwm4
dm: LightDM 1.26.0 Distro: MX-19.4_x64 patito feo November 11 2020
base: Debian GNU/Linux 10 (buster)
Machine:
Type: Desktop Mobo: EVGA model: 111-CD-E630 v: Rev 1.xx
serial: <root required> BIOS: American Megatrends v: 0301 date: 01/20/2010
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M325
serial: 400a-2b-56-14-89 charge: 55% (should be ignored) rechargeable: yes
status: Discharging
Memory:
RAM: total: 3.60 GiB used: 378.3 MiB (10.3%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Dual Core model: Intel Core i3 530 bits: 64 type: MT MCP
arch: Nehalem rev: 2 L2 cache: 4096 KiB bogomips: 23407
Speed: 1462 MHz min/max: 1200/2933 MHz Core speeds (MHz): 1: 1463 2: 1463
3: 1463 4: 1464
Flags: acpi aperfmperf apic arat arch_perfmon bts clflush cmov
constant_tsc cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts ept est
flexpriority flush_l1d fpu fxsr ht ibpb ibrs lahf_lm lm mca mce mmx
monitor msr mtrr nonstop_tsc nopl nx pae pat pbe pdcm pebs pge pni popcnt
pse pse36 pti rdtscp rep_good sep ss ssbd sse sse2 sse4_1 sse4_2 ssse3
stibp syscall tm tm2 tpr_shadow tsc vme vmx vnmi vpid xtopology xtpr
Graphics:
Device-1: Intel Core Processor Integrated Graphics vendor: Pegatron
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:0042
Display: x11 server: X.Org 1.20.4 driver: intel resolution: 1680x1050~60Hz
OpenGL: renderer: Mesa DRI Intel Ironlake Desktop v: 2.1 Mesa 18.3.6
direct render: Yes
Audio:
Device-1: Intel 5 Series/3400 Series High Definition Audio
vendor: Pegatron driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:3b56
Sound Server: ALSA v: k4.19.0-16-amd64
Network:
Device-1: Intel 82578DC Gigabit Network vendor: Pegatron driver: e1000e
v: 3.2.6-k port: e880 bus ID: 00:19.0 chip ID: 8086:10f0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: e0:cb:cb:cb:cb:d5
IP v4: 192.168.10.14/24 type: noprefixroute scope: global
broadcast: 192.168.10.255
IP v6: fe80::cb:cb:cb:d59c/64 type: noprefixroute scope: link
WAN IP: 67.42.94.176
Drives:
Local Storage: total: 465.76 GiB used: 183.70 GiB (39.4%)
ID-1: /dev/sda vendor: Western Digital model: WD5000AAKX-00ERMA0
size: 465.76 GiB speed: 3.0 Gb/s rotation: 7200 rpm
serial: WD-WCC2EUD14009 rev: 1H15 scheme: MBR
Optical-1: /dev/sr0 vendor: ATAPI model: iHAS324 Y rev: BL1W
dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 48 multisession: yes audio: yes dvd: yes
rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
RAID:
Message: No RAID data was found.
Partition:
ID-1: / size: 19.10 GiB used: 6.00 GiB (31.4%) fs: ext4 dev: /dev/sda4
label: Nuthatch uuid: 8228a13c-4522-4e4c-8b69-857a5f3e6f90
ID-2: /home size: 9.55 GiB used: 257.8 MiB (2.6%) fs: ext4 dev: /dev/sda7
label: Verdin uuid: 37c6a987-a5b4-40db-ad5a-c915e16eea8e
ID-3: /media/Wren size: 367.23 GiB used: 177.46 GiB (48.3%) fs: ext4
dev: /dev/sda8 label: Wren uuid: 53fdcead-952b-4f13-a011-98fe972019cb
ID-4: swap-1 size: 4.66 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda5
label: N/A uuid: e5b4a468-659f-4bce-b498-c86417dc7532
Unmounted:
ID-1: /dev/sda1 size: 19.53 GiB fs: ext4 label: Dipper
uuid: bfee624a-201c-4bf2-a751-598598690883
ID-2: /dev/sda2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
ID-3: /dev/sda3 size: 19.53 GiB fs: ext4 label: Waxwing
uuid: 6dec0995-1537-4468-9040-639ddf24d48d
ID-4: /dev/sda6 size: 9.77 GiB fs: ext4 label: Crossbill
uuid: 1d931830-f00d-4573-b21c-064d1cb96548
ID-5: /dev/sda9 size: 9.76 GiB fs: ext4 label: Auklet
uuid: 4f6529a8-10eb-4642-9d1b-53b1c448fb4b
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 3-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 3-4:2 info: Genesys Logic USB 2.0 Multislot Card Reader/Writer
type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.0
speed: 480 Mb/s chip ID: 05e3:0716 serial: 000000009744
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 5-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Hub: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Hub: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s
chip ID: 1d6b:0001
Device-2: 8-2:2 info: Logitech Unifying Receiver type: Keyboard,Mouse,HID
driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
chip ID: 046d:c52b
Sensors:
System Temperatures: cpu: 27.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 189 Uptime: 1m Init: SysVinit v: 2.93 runlevel: 5 default: 5
Compilers: gcc: 8.3.0 alt: 8 Shell: sysdata.scr running in: gnome-terminal
inxi: 3.0.36
--wmctrl -m--
Name: Xfwm4
--ip -s address--
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
RX: bytes packets errors dropped overrun mcast
1514 20 0 0 0 0
TX: bytes packets errors dropped carrier collsns
1514 20 0 0 0 0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether e0:cb:cb:cb:cb:d5 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.14/24 brd 192.168.10.255 scope global noprefixroute eth0
valid_lft forever preferred_lft forever
inet6 fe80::cb:cb:cb:d59c/64 scope link noprefixroute
valid_lft forever preferred_lft forever
RX: bytes packets errors dropped overrun mcast
6788 59 0 0 0 13
TX: bytes packets errors dropped carrier collsns
10457 88 0 0 0 0
--ip route--
default via 192.168.10.1 dev eth0 proto static metric 100
192.168.10.0/24 dev eth0 proto kernel scope link src 192.168.10.14 metric 100
--route -n--
--inxi -rc0--
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian buster-updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian buster main contrib non-free
2: deb http://deb.debian.org/debian-security buster/updates main contrib non-free
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://la.mxrepo.com/mx/repo/ buster main non-free
No active apt repos in: /etc/apt/sources.list.d/various.list
--versions--
GNU bash, version 5.0.3(1)-release (x86_64-pc-linux-gnu)
BleachBit version 4.1.0
conky 1.10.8
fdisk from util-linux 2.33.1
FeatherNotes 0.7.0
Mozilla Firefox 88.0.1
GNU Image Manipulation Program version 2.10.12
# GNOME Terminal 3.30.2 using VTE 0.54.2 +GNUTLS
grep (GNU grep) 3.3
inxi 3.0.36-00 (2019-08-14)
LibreOffice 6.1.5.2 10(Build:2)
logrotate 3.14.0
pkexec version 0.105
Python 3.7.3
Quod Libet 4.2.1
sed (GNU sed) 4.7
SSHFS version 2.10.0
Sudo version 1.8.27
thunar 1.8.14 (Xfce 4.14)
Thunderbird 68.12.0
yad 0.40.0 (GTK+ 3.24.5)
--sensors--
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +28.0C (high = +89.0C, crit = +105.0C)
Core 2: +32.0C (high = +89.0C, crit = +105.0C)Where to turn?
Mike