WiFi on openSUSE Tumbleweed not working with wicked or NetworkManager
by redd9 from LinuxQuestions.org on (#5QRRX)
Hello,
I can't seem to get WiFi in openSUSE Tumbleweed working. Any suggestions would be appreciated.
Code:07: PCI 300.0: 0280 Network controller
[Created at pci.386]
Unique ID: svHJ.lTCK_+KOKi9
Parent ID: aYFK.5IXdWontwv8
SysFS ID: /devices/pci0000:00/0000:00:02.3/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Realtek Network controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8852
SubVendor: pci 0x17aa "Lenovo"
SubDevice: pci 0x4852
I/O Ports: 0x2000-0x2fff (rw,disabled)
Memory Range: 0xfd600000-0xfd6fffff (rw,non-prefetchable,disabled)
IRQ: 255 (no events)
Module Alias: "pci:v000010ECd00008852sv000017AAsd00004852bc02sc80i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)Code:0: tpacpi_bluetooth_sw: Bluetooth
Soft blocked: no
Hard blocked: no
1: tpacpi_wwan_sw: Wireless WAN
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: noCode:1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 90:2e:16:6d:9f:c8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.76/24 brd 192.168.1.255 scope global dynamic noprefixroute enp2s0f0
valid_lft 82794sec preferred_lft 82794sec
inet6 fe80::922e:16ff:fe6d:9fc8/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: enp6s0f3u1u1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 5c:ff:35:d4:b5:63 brd ff:ff:ff:ff:ff:ff
4: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 7a:64:c0:aa:db:55 brd ff:ff:ff:ff:ff:ff
altname enp6s0f3u1u2c4i2
5: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 500
link/none
inet 10.163.24.190 peer 10.163.24.189/32 scope global tun0
valid_lft forever preferred_lft forever
inet6 2620:113:80c0:8340::102e/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::f112:95b9:f064:e899/64 scope link stable-privacy
valid_lft forever preferred_lft foreverWhen I open YaST, a wireless NIC does not appear. Please let me know if there is any other info I should post.
I can't seem to get WiFi in openSUSE Tumbleweed working. Any suggestions would be appreciated.
Code:07: PCI 300.0: 0280 Network controller
[Created at pci.386]
Unique ID: svHJ.lTCK_+KOKi9
Parent ID: aYFK.5IXdWontwv8
SysFS ID: /devices/pci0000:00/0000:00:02.3/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Realtek Network controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8852
SubVendor: pci 0x17aa "Lenovo"
SubDevice: pci 0x4852
I/O Ports: 0x2000-0x2fff (rw,disabled)
Memory Range: 0xfd600000-0xfd6fffff (rw,non-prefetchable,disabled)
IRQ: 255 (no events)
Module Alias: "pci:v000010ECd00008852sv000017AAsd00004852bc02sc80i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)Code:0: tpacpi_bluetooth_sw: Bluetooth
Soft blocked: no
Hard blocked: no
1: tpacpi_wwan_sw: Wireless WAN
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: noCode:1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 90:2e:16:6d:9f:c8 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.76/24 brd 192.168.1.255 scope global dynamic noprefixroute enp2s0f0
valid_lft 82794sec preferred_lft 82794sec
inet6 fe80::922e:16ff:fe6d:9fc8/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: enp6s0f3u1u1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 5c:ff:35:d4:b5:63 brd ff:ff:ff:ff:ff:ff
4: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 7a:64:c0:aa:db:55 brd ff:ff:ff:ff:ff:ff
altname enp6s0f3u1u2c4i2
5: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 500
link/none
inet 10.163.24.190 peer 10.163.24.189/32 scope global tun0
valid_lft forever preferred_lft forever
inet6 2620:113:80c0:8340::102e/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::f112:95b9:f064:e899/64 scope link stable-privacy
valid_lft forever preferred_lft foreverWhen I open YaST, a wireless NIC does not appear. Please let me know if there is any other info I should post.