Screen flashes and turns blank after resuming from blank state. Possibly a kernel bug. Fedora 35 with 5.14 kernel
by noname01 from LinuxQuestions.org on (#5RWJY)
I'm using an r5 2500u latop with a gtx 1050 gpu, an oem 256gb samsung 981a ssd, .
here is the dmesg:
Code:
[ 0.000000] Linux version 5.14.10-300.fc35.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 11.2.1 20210728 (Red Hat 11.2.1-1), GNU ld version 2.37-10.fc35) #1 SMP Thu Oct 7 20:48:44 UTC 2021
[ 0.568538] Non-volatile memory driver v1.3
[ 0.568560] Linux agpgart interface v0.103
[ 0.573274] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0x7d44f000-0x7d44ffff flags 0x200] vs 7d44f000 4000
[ 0.573280] tpm_crb MSFT0101:00: can't request region for resource [mem 0x7d44f000-0x7d44ffff]
[ 0.573281] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 5.670755] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[ 5.816873] r8169 0000:04:00.0 enp4s0: Link is Down
[ 6.040270] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.040278] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.040280] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.040283] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.280232] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.280240] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.280243] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.280246] ACPI: \: failed to evaluate _DSM (0x1001)
[ 10.511160] wlp3s0: authenticate with 14:4d:67:7c:27:20
[ 10.521000] wlp3s0: send auth to 14:4d:67:7c:27:20 (try 1/3)
[ 10.531334] wlp3s0: authenticated
[ 10.532786] wlp3s0: associate with 14:4d:67:7c:27:20 (try 1/3)
[ 10.536737] wlp3s0: RX AssocResp from 14:4d:67:7c:27:20 (capab=0x411 status=0 aid=2)
[ 10.544678] wlp3s0: associated
[ 10.593060] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 14.264472] rfkill: input handler disabled
[ 14.406511] Bluetooth: RFCOMM TTY layer initialized
[ 14.406519] Bluetooth: RFCOMM socket layer initialized
[ 14.406615] Bluetooth: RFCOMM ver 1.11
[ 19.384955] rfkill: input handler enabled
[ 21.364754] rfkill: input handler disabled
[ 61.741464] [drm] perform_link_training_with_retries: Link training attempt 1 of 4 failed
[ 62.307271] [drm] perform_link_training_with_retries: Link training attempt 2 of 4 failed
[ 62.872002] [drm] perform_link_training_with_retries: Link training attempt 3 of 4 failed
[ 63.439548] [drm] enabling link 0 failed: 15
[ 65.373934] wlp3s0: deauthenticating from 14:4d:67:7c:27:20 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 65.613436] PM: suspend entry (deep)
[ 65.658148] Filesystems sync: 0.044 seconds
[ 65.666984] rfkill: input handler enabled
[ 65.724375] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 65.726943] OOM killer disabled.
[ 65.726945] Freezing remaining freezable tasks ... (elapsed 0.056 seconds) done.
[ 65.799765] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 65.800462] sd 1:0:0:0: [sda] Stopping disk
[ 65.821952] [drm] free PSP TMR buffer
[ 66.390828] PM: suspend devices took 0.608 seconds
[ 66.392028] ACPI: EC: interrupt blocked
[ 66.579308] ACPI: PM: Preparing to enter system sleep state S3
[ 66.887185] ACPI: EC: event blocked
[ 66.887190] ACPI: EC: EC stopped
[ 66.887192] ACPI: PM: Saving platform NVS memory
[ 66.887272] Disabling non-boot CPUs ...
[ 66.890202] smpboot: CPU 1 is now offline
[ 66.893607] smpboot: CPU 2 is now offline
[ 66.896957] smpboot: CPU 3 is now offline
[ 66.900289] smpboot: CPU 4 is now offline
[ 66.904028] smpboot: CPU 5 is now offline
[ 66.907400] smpboot: CPU 6 is now offline
[ 66.910267] smpboot: CPU 7 is now offline
[ 66.910721] ACPI: PM: Low-level resume complete
[ 66.910721] ACPI: EC: EC started
[ 66.910721] ACPI: PM: Restoring platform NVS memory
[ 66.910721] Enabling non-boot CPUs ...
[ 66.910721] x86: Booting SMP configuration:
[ 66.910721] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 66.890132] microcode: CPU1: patch_level=0x0810100b
[ 66.912680] ACPI: \_PR_.P001: Found 2 idle states
[ 66.913010] CPU1 is up
[ 66.913113] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 66.912438] microcode: CPU2: patch_level=0x0810100b
[ 66.914018] ACPI: \_PR_.P002: Found 2 idle states
[ 66.914525] CPU2 is up
[ 66.914566] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 66.913623] microcode: CPU3: patch_level=0x0810100b
[ 66.915398] ACPI: \_PR_.P003: Found 2 idle states
[ 66.916020] CPU3 is up
[ 66.916064] smpboot: Booting Node 0 Processor 4 APIC 0x4
[ 66.915171] microcode: CPU4: patch_level=0x0810100b
[ 66.917819] ACPI: \_PR_.P004: Found 2 idle states
[ 66.918598] CPU4 is up
[ 66.918639] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 66.917461] microcode: CPU5: patch_level=0x0810100b
[ 66.919565] ACPI: \_PR_.P005: Found 2 idle states
[ 66.920347] CPU5 is up
[ 66.920384] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 66.919214] microcode: CPU6: patch_level=0x0810100b
[ 66.921290] ACPI: \_PR_.P006: Found 2 idle states
[ 66.922245] CPU6 is up
[ 66.922290] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 66.920915] microcode: CPU7: patch_level=0x0810100b
[ 66.923219] ACPI: \_PR_.P007: Found 2 idle states
[ 66.924535] CPU7 is up
[ 66.925773] ACPI: PM: Waking up from system sleep state S3
[ 66.932410] ACPI: EC: interrupt unblocked
[ 67.220366] ACPI: EC: event unblocked
[ 67.227029] sd 1:0:0:0: [sda] Starting disk
[ 67.227673] [drm] PCIE GART of 1024M enabled.
[ 67.227675] [drm] PTB located at 0x000000F400900000
[ 67.227700] [drm] PSP is resuming...
[ 67.250421] [drm] reserve 0x400000 from 0xf43fc00000 for PSP TMR
[ 67.289265] nvme nvme0: Shutdown timeout set to 8 seconds
[ 67.312828] nvme nvme0: 16/0/0 default/read/poll queues
[ 67.359960] amdgpu 0000:05:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 67.379542] amdgpu 0000:05:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 67.379544] amdgpu 0000:05:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 67.381187] [drm] kiq ring mec 2 pipe 1 q 0
[ 67.382811] amdgpu: restore the fine grain parameters
[ 67.460328] ACPI: \: failed to evaluate _DSM (0x1001)
[ 67.460334] ACPI: \: failed to evaluate _DSM (0x1001)
[ 67.460337] ACPI: \: failed to evaluate _DSM (0x1001)
[ 67.460340] ACPI: \: failed to evaluate _DSM (0x1001)
[ 67.472281] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[ 67.472362] amdgpu 0000:05:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[ 67.472375] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 67.472375] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 67.472378] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 67.472391] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 67.472392] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 67.472395] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 67.472397] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 67.472399] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 67.472402] amdgpu 0000:05:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 67.472404] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[ 67.472407] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[ 67.472409] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[ 67.472411] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[ 67.472414] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[ 67.482484] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
[ 67.894790] Bluetooth: hci0: command 0x0c52 tx timeout
[ 67.899359] usb 3-2.3: reset full-speed USB device number 5 using xhci_hcd
[ 68.058833] usb 3-2.1: reset full-speed USB device number 3 using xhci_hcd
[ 68.218738] usb 3-2.2: reset high-speed USB device number 4 using xhci_hcd
[ 68.349655] PM: resume devices took 1.129 seconds
[ 68.349665] OOM killer enabled.
[ 68.349666] Restarting tasks ...
[ 68.352690] Bluetooth: hci0: Firmware revision 0.1 build 212 week 30 2021
[ 68.357866] done.
[ 68.368896] PM: suspend exit
[ 68.378107] rfkill: input handler disabled
[ 68.414412] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[ 68.585246] r8169 0000:04:00.0 enp4s0: Link is Down
[ 69.414757] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 69.597652] ata2.00: configured for UDMA/100
[ 72.031737] wlp3s0: authenticate with 14:4d:67:7c:27:20
[ 72.043194] wlp3s0: send auth to 14:4d:67:7c:27:20 (try 1/3)
[ 72.049845] wlp3s0: authenticated
[ 72.051823] wlp3s0: associate with 14:4d:67:7c:27:20 (try 1/3)
[ 72.055809] wlp3s0: RX AssocResp from 14:4d:67:7c:27:20 (capab=0x411 status=0 aid=2)
[ 72.059610] wlp3s0: associated
[ 72.086288] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes readyI'm suspecting an amd driver error. I have tried different driver versions on windows. v23 (6/2018) works. but starting from v25 till currenttly (v27) it just crashes in the same behavior. tried amdgpu.dc = 0, nomodeset,amdgpu.acpi = 0, amd.dpm = 0 ,no_console_suspend ,no avail.The above output ends after I ( push power button ) suspended the system ( it works, turn back on flawlessly ). Before that is the problem, turning screen blank (off , fn+f7 or by screen saver default timing) and can't turn it back on without force suspend with power button.
I use fwts aspm to check it out a bit here's a part of it
Code:
Test 1 of 2: PCIe ASPM ACPI test.
PCIe ASPM is not controlled by Linux kernel.
ADVICE: BIOS reports that Linux kernel should not modify ASPM settings that BIOS
configured. It can be intentional because hardware vendors identified some
capability bugs between the motherboard and the add-on cards.
Test 2 of 2: PCIe ASPM registers test.
PASSED: Test 2, PCIe ASPM setting matched was matched.
WARNING: Test 2, RP 0000h:00h:08h.01h L0s not enabled.
WARNING: Test 2, RP 0000h:00h:08h.01h L1 not enabled.
WARNING: Test 2, Device 0000h:05h:00h.03h L0s not enabled.
WARNING: Test 2, Device 0000h:05h:00h.03h L1 not enabled.Very stuck, help !
here is the dmesg:
Code:
[ 0.000000] Linux version 5.14.10-300.fc35.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 11.2.1 20210728 (Red Hat 11.2.1-1), GNU ld version 2.37-10.fc35) #1 SMP Thu Oct 7 20:48:44 UTC 2021
[ 0.568538] Non-volatile memory driver v1.3
[ 0.568560] Linux agpgart interface v0.103
[ 0.573274] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0x7d44f000-0x7d44ffff flags 0x200] vs 7d44f000 4000
[ 0.573280] tpm_crb MSFT0101:00: can't request region for resource [mem 0x7d44f000-0x7d44ffff]
[ 0.573281] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 5.670755] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[ 5.816873] r8169 0000:04:00.0 enp4s0: Link is Down
[ 6.040270] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.040278] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.040280] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.040283] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.280232] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.280240] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.280243] ACPI: \: failed to evaluate _DSM (0x1001)
[ 6.280246] ACPI: \: failed to evaluate _DSM (0x1001)
[ 10.511160] wlp3s0: authenticate with 14:4d:67:7c:27:20
[ 10.521000] wlp3s0: send auth to 14:4d:67:7c:27:20 (try 1/3)
[ 10.531334] wlp3s0: authenticated
[ 10.532786] wlp3s0: associate with 14:4d:67:7c:27:20 (try 1/3)
[ 10.536737] wlp3s0: RX AssocResp from 14:4d:67:7c:27:20 (capab=0x411 status=0 aid=2)
[ 10.544678] wlp3s0: associated
[ 10.593060] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 14.264472] rfkill: input handler disabled
[ 14.406511] Bluetooth: RFCOMM TTY layer initialized
[ 14.406519] Bluetooth: RFCOMM socket layer initialized
[ 14.406615] Bluetooth: RFCOMM ver 1.11
[ 19.384955] rfkill: input handler enabled
[ 21.364754] rfkill: input handler disabled
[ 61.741464] [drm] perform_link_training_with_retries: Link training attempt 1 of 4 failed
[ 62.307271] [drm] perform_link_training_with_retries: Link training attempt 2 of 4 failed
[ 62.872002] [drm] perform_link_training_with_retries: Link training attempt 3 of 4 failed
[ 63.439548] [drm] enabling link 0 failed: 15
[ 65.373934] wlp3s0: deauthenticating from 14:4d:67:7c:27:20 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 65.613436] PM: suspend entry (deep)
[ 65.658148] Filesystems sync: 0.044 seconds
[ 65.666984] rfkill: input handler enabled
[ 65.724375] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 65.726943] OOM killer disabled.
[ 65.726945] Freezing remaining freezable tasks ... (elapsed 0.056 seconds) done.
[ 65.799765] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 65.800462] sd 1:0:0:0: [sda] Stopping disk
[ 65.821952] [drm] free PSP TMR buffer
[ 66.390828] PM: suspend devices took 0.608 seconds
[ 66.392028] ACPI: EC: interrupt blocked
[ 66.579308] ACPI: PM: Preparing to enter system sleep state S3
[ 66.887185] ACPI: EC: event blocked
[ 66.887190] ACPI: EC: EC stopped
[ 66.887192] ACPI: PM: Saving platform NVS memory
[ 66.887272] Disabling non-boot CPUs ...
[ 66.890202] smpboot: CPU 1 is now offline
[ 66.893607] smpboot: CPU 2 is now offline
[ 66.896957] smpboot: CPU 3 is now offline
[ 66.900289] smpboot: CPU 4 is now offline
[ 66.904028] smpboot: CPU 5 is now offline
[ 66.907400] smpboot: CPU 6 is now offline
[ 66.910267] smpboot: CPU 7 is now offline
[ 66.910721] ACPI: PM: Low-level resume complete
[ 66.910721] ACPI: EC: EC started
[ 66.910721] ACPI: PM: Restoring platform NVS memory
[ 66.910721] Enabling non-boot CPUs ...
[ 66.910721] x86: Booting SMP configuration:
[ 66.910721] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 66.890132] microcode: CPU1: patch_level=0x0810100b
[ 66.912680] ACPI: \_PR_.P001: Found 2 idle states
[ 66.913010] CPU1 is up
[ 66.913113] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 66.912438] microcode: CPU2: patch_level=0x0810100b
[ 66.914018] ACPI: \_PR_.P002: Found 2 idle states
[ 66.914525] CPU2 is up
[ 66.914566] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 66.913623] microcode: CPU3: patch_level=0x0810100b
[ 66.915398] ACPI: \_PR_.P003: Found 2 idle states
[ 66.916020] CPU3 is up
[ 66.916064] smpboot: Booting Node 0 Processor 4 APIC 0x4
[ 66.915171] microcode: CPU4: patch_level=0x0810100b
[ 66.917819] ACPI: \_PR_.P004: Found 2 idle states
[ 66.918598] CPU4 is up
[ 66.918639] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 66.917461] microcode: CPU5: patch_level=0x0810100b
[ 66.919565] ACPI: \_PR_.P005: Found 2 idle states
[ 66.920347] CPU5 is up
[ 66.920384] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 66.919214] microcode: CPU6: patch_level=0x0810100b
[ 66.921290] ACPI: \_PR_.P006: Found 2 idle states
[ 66.922245] CPU6 is up
[ 66.922290] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 66.920915] microcode: CPU7: patch_level=0x0810100b
[ 66.923219] ACPI: \_PR_.P007: Found 2 idle states
[ 66.924535] CPU7 is up
[ 66.925773] ACPI: PM: Waking up from system sleep state S3
[ 66.932410] ACPI: EC: interrupt unblocked
[ 67.220366] ACPI: EC: event unblocked
[ 67.227029] sd 1:0:0:0: [sda] Starting disk
[ 67.227673] [drm] PCIE GART of 1024M enabled.
[ 67.227675] [drm] PTB located at 0x000000F400900000
[ 67.227700] [drm] PSP is resuming...
[ 67.250421] [drm] reserve 0x400000 from 0xf43fc00000 for PSP TMR
[ 67.289265] nvme nvme0: Shutdown timeout set to 8 seconds
[ 67.312828] nvme nvme0: 16/0/0 default/read/poll queues
[ 67.359960] amdgpu 0000:05:00.0: amdgpu: RAS: optional ras ta ucode is not available
[ 67.379542] amdgpu 0000:05:00.0: amdgpu: RAP: optional rap ta ucode is not available
[ 67.379544] amdgpu 0000:05:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
[ 67.381187] [drm] kiq ring mec 2 pipe 1 q 0
[ 67.382811] amdgpu: restore the fine grain parameters
[ 67.460328] ACPI: \: failed to evaluate _DSM (0x1001)
[ 67.460334] ACPI: \: failed to evaluate _DSM (0x1001)
[ 67.460337] ACPI: \: failed to evaluate _DSM (0x1001)
[ 67.460340] ACPI: \: failed to evaluate _DSM (0x1001)
[ 67.472281] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[ 67.472362] amdgpu 0000:05:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[ 67.472375] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 67.472375] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 67.472378] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 67.472391] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 67.472392] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 67.472395] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 67.472397] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 67.472399] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 67.472402] amdgpu 0000:05:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 67.472404] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[ 67.472407] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[ 67.472409] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[ 67.472411] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[ 67.472414] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[ 67.482484] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
[ 67.894790] Bluetooth: hci0: command 0x0c52 tx timeout
[ 67.899359] usb 3-2.3: reset full-speed USB device number 5 using xhci_hcd
[ 68.058833] usb 3-2.1: reset full-speed USB device number 3 using xhci_hcd
[ 68.218738] usb 3-2.2: reset high-speed USB device number 4 using xhci_hcd
[ 68.349655] PM: resume devices took 1.129 seconds
[ 68.349665] OOM killer enabled.
[ 68.349666] Restarting tasks ...
[ 68.352690] Bluetooth: hci0: Firmware revision 0.1 build 212 week 30 2021
[ 68.357866] done.
[ 68.368896] PM: suspend exit
[ 68.378107] rfkill: input handler disabled
[ 68.414412] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
[ 68.585246] r8169 0000:04:00.0 enp4s0: Link is Down
[ 69.414757] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 69.597652] ata2.00: configured for UDMA/100
[ 72.031737] wlp3s0: authenticate with 14:4d:67:7c:27:20
[ 72.043194] wlp3s0: send auth to 14:4d:67:7c:27:20 (try 1/3)
[ 72.049845] wlp3s0: authenticated
[ 72.051823] wlp3s0: associate with 14:4d:67:7c:27:20 (try 1/3)
[ 72.055809] wlp3s0: RX AssocResp from 14:4d:67:7c:27:20 (capab=0x411 status=0 aid=2)
[ 72.059610] wlp3s0: associated
[ 72.086288] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes readyI'm suspecting an amd driver error. I have tried different driver versions on windows. v23 (6/2018) works. but starting from v25 till currenttly (v27) it just crashes in the same behavior. tried amdgpu.dc = 0, nomodeset,amdgpu.acpi = 0, amd.dpm = 0 ,no_console_suspend ,no avail.The above output ends after I ( push power button ) suspended the system ( it works, turn back on flawlessly ). Before that is the problem, turning screen blank (off , fn+f7 or by screen saver default timing) and can't turn it back on without force suspend with power button.
I use fwts aspm to check it out a bit here's a part of it
Code:
Test 1 of 2: PCIe ASPM ACPI test.
PCIe ASPM is not controlled by Linux kernel.
ADVICE: BIOS reports that Linux kernel should not modify ASPM settings that BIOS
configured. It can be intentional because hardware vendors identified some
capability bugs between the motherboard and the add-on cards.
Test 2 of 2: PCIe ASPM registers test.
PASSED: Test 2, PCIe ASPM setting matched was matched.
WARNING: Test 2, RP 0000h:00h:08h.01h L0s not enabled.
WARNING: Test 2, RP 0000h:00h:08h.01h L1 not enabled.
WARNING: Test 2, Device 0000h:05h:00h.03h L0s not enabled.
WARNING: Test 2, Device 0000h:05h:00h.03h L1 not enabled.Very stuck, help !