New Aluminum-Sulfur Battery Tech Offers Full Charging In Under a Minute

According to a new paper published in the journal Nature, researchers at MIT describe new aluminum-sulfur batteries that are made entirely from abundant and inexpensive materials and can be charged in less than a minute. "The new battery architecture, which uses aluminum and sulfur as its two electrode materials, with a molten salt electrolyte in between, is described today in the journal Nature, in a paper by MIT Professor Donald Sadoway, along with 15 others at MIT and in China, Canada, Kentucky, and Tennessee," reports MIT News. The caveat with this new kind of battery is that it requires a variety of molten salts that need to be "close to the boiling point of water." From the report: In their experiments, the team showed that the battery cells could endure hundreds of cycles at exceptionally high charging rates, with a projected cost per cell of about one-sixth that of comparable lithium-ion cells. They showed that the charging rate was highly dependent on the working temperature, with 110 degrees Celsius (230 degrees Fahrenheit) showing 25 times faster rates than 25 C (77 F). Surprisingly, the molten salt the team chose as an electrolyte simply because of its low melting point turned out to have a fortuitous advantage. One of the biggest problems in battery reliability is the formation of dendrites, which are narrow spikes of metal that build up on one electrode and eventually grow across to contact the other electrode, causing a short-circuit and hampering efficiency. But this particular salt, it happens, is very good at preventing that malfunction. The chloro-aluminate salt they chose "essentially retired these runaway dendrites, while also allowing for very rapid charging," Sadoway says. "We did experiments at very high charging rates, charging in less than a minute, and we never lost cells due to dendrite shorting." What's more, the battery requires no external heat source to maintain its operating temperature. The heat is naturally produced electrochemically by the charging and discharging of the battery. "As you charge, you generate heat, and that keeps the salt from freezing. And then, when you discharge, it also generates heat," Sadoway says. In a typical installation used for load-leveling at a solar generation facility, for example, "you'd store electricity when the sun is shining, and then you'd draw electricity after dark, and you'd do this every day. And that charge-idle-discharge-idle is enough to generate enough heat to keep the thing at temperature." This new battery formulation, he says, would be ideal for installations of about the size needed to power a single home or small to medium business, producing on the order of a few tens of kilowatt-hours of storage capacity. For larger installations, up to utility scale of tens to hundreds of megawatt hours, other technologies might be more effective, including the liquid metal batteries Sadoway and his students developed several years ago and which formed the basis for a spinoff company called Ambri, which hopes to deliver its first products within the next year. For that invention, Sadoway was recently awarded this year's European Inventor Award. The smaller scale of the aluminum-sulfur batteries would also make them practical for uses such as electric vehicle charging stations, Sadoway says. He points out that when electric vehicles become common enough on the roads that several cars want to charge up at once, as happens today with gasoline fuel pumps, "if you try to do that with batteries and you want rapid charging, the amperages are just so high that we don't have that amount of amperage in the line that feeds the facility." So having a battery system such as this to store power and then release it quickly when needed could eliminate the need for installing expensive new power lines to serve these chargers. "The first order of business for the company is to demonstrate that it works at scale," Sadoway says, and then subject it to a series of stress tests, including running through hundreds of charging cycles. If you're looking for a detailed breakdown of how this new battery works, we recommend you check out Ars Technica's article here.

Read more of this story at Slashdot.