Pop! OS - Second Monitor Freezes
by killingthemonkey from LinuxQuestions.org on (#6CC6J)
My second monitor will freeze. Apparently, all of the windows on the monitor are still active but the monitor stops updating. If I unplug the monitor from the laptop and plug it back in, it starts working again. It is connected via Thunderbolt.
I am running Pop! OS 22.04 LTS.
uname -a returns:
Linux pop-os 6.2.6-7660206-generic #202303130630~1685473338~22.04~995127e SMP PREEMPT_DYNAMIC Tue M x86_64 x86_64 x86_64 GNU/Linux
From lspci -v:
Code:01:00.0 VGA compatible controller: NVIDIA Corporation GA106M [GeForce RTX 3060 Mobile / Max-Q] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell GA106M [GeForce RTX 3060 Mobile / Max-Q]
Physical Slot: 0
Flags: bus master, fast devsel, latency 0, IRQ 107, IOMMU group 11
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Memory at fa00000000 (64-bit, prefetchable) [size=8G]
Memory at fc00000000 (64-bit, prefetchable) [size=32M]
I/O ports at 3000 [size=128]
Expansion ROM at d1080000 [virtual] [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Legacy Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [258] L1 PM Substates
Capabilities: [128] Power Budgeting <?>
Capabilities: [420] Advanced Error Reporting
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] Secondary PCI Express
Capabilities: [bb0] Physical Resizable BAR
Capabilities: [c1c] Physical Layer 16.0 GT/s <?>
Capabilities: [d00] Lane Margining at the Receiver <?>
Capabilities: [e00] Data Link Feature <?>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidiaDell G15
My specs:
Ryzen 7 5000 seres
32 GB RAM
Both CPU and RAM running at about 50% at the moment. That'll get used up a little more. I've been playing Diablo 2 Resurrected. That game shouldn't hit my hardware too hard.
Any ideas?
I am running Pop! OS 22.04 LTS.
uname -a returns:
Linux pop-os 6.2.6-7660206-generic #202303130630~1685473338~22.04~995127e SMP PREEMPT_DYNAMIC Tue M x86_64 x86_64 x86_64 GNU/Linux
From lspci -v:
Code:01:00.0 VGA compatible controller: NVIDIA Corporation GA106M [GeForce RTX 3060 Mobile / Max-Q] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell GA106M [GeForce RTX 3060 Mobile / Max-Q]
Physical Slot: 0
Flags: bus master, fast devsel, latency 0, IRQ 107, IOMMU group 11
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Memory at fa00000000 (64-bit, prefetchable) [size=8G]
Memory at fc00000000 (64-bit, prefetchable) [size=32M]
I/O ports at 3000 [size=128]
Expansion ROM at d1080000 [virtual] [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Legacy Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [258] L1 PM Substates
Capabilities: [128] Power Budgeting <?>
Capabilities: [420] Advanced Error Reporting
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900] Secondary PCI Express
Capabilities: [bb0] Physical Resizable BAR
Capabilities: [c1c] Physical Layer 16.0 GT/s <?>
Capabilities: [d00] Lane Margining at the Receiver <?>
Capabilities: [e00] Data Link Feature <?>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidiaDell G15
My specs:
Ryzen 7 5000 seres
32 GB RAM
Both CPU and RAM running at about 50% at the moment. That'll get used up a little more. I've been playing Diablo 2 Resurrected. That game shouldn't hit my hardware too hard.
Any ideas?