Unable to list and mount usb stick
by intmail01 from LinuxQuestions.org on (#6GDW9)
Hi,
I have 128gb usb memory stick and can not mount it.
fdisk -l can not see the device.
This is dmesg log :
Code:[ 4473.686795] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 4473.686798] sd 1:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current]
[ 4473.686799] sd 1:0:0:0: [sdb] tag#0 Add. Sense: Medium not present
[ 4473.686801] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[ 4473.686802] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4473.686805] Buffer I/O error on dev sdb, logical block 0, async page readWhen I do smartctl -a /dev/sdb -d scsi :
Code:smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.19] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: ADATA
Product: USB Flash Drive
Revision: 1100
Compliance: SPC-4
User Capacity: 124,151,398,400 bytes [124 GB]
Logical block size: 512 bytes
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Logical Unit id: 0x534d490033323830
Serial number: AA00000000000489
Device type: disk
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Local Time is: Thu Nov 16 12:05:12 2023 EAT
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
Temperature Warning: Disabled or Not Supported
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Device does not support Self Test loggingWhat are solutions ???
Thank you
I have 128gb usb memory stick and can not mount it.
fdisk -l can not see the device.
This is dmesg log :
Code:[ 4473.686795] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[ 4473.686798] sd 1:0:0:0: [sdb] tag#0 Sense Key : Not Ready [current]
[ 4473.686799] sd 1:0:0:0: [sdb] tag#0 Add. Sense: Medium not present
[ 4473.686801] sd 1:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[ 4473.686802] blk_update_request: I/O error, dev sdb, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 4473.686805] Buffer I/O error on dev sdb, logical block 0, async page readWhen I do smartctl -a /dev/sdb -d scsi :
Code:smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.19] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: ADATA
Product: USB Flash Drive
Revision: 1100
Compliance: SPC-4
User Capacity: 124,151,398,400 bytes [124 GB]
Logical block size: 512 bytes
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Logical Unit id: 0x534d490033323830
Serial number: AA00000000000489
Device type: disk
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Local Time is: Thu Nov 16 12:05:12 2023 EAT
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
Temperature Warning: Disabled or Not Supported
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Device does not support Self Test loggingWhat are solutions ???
Thank you