Slackware 15 x86_64 - Slackpkg+ won't fetch from 3rd party repositories
by glupa4e from LinuxQuestions.org on (#6HC9C)
Hello,
i've installed fresh 15.0 64bit. I was aslo able to do a full upgrade of the system with slackpkg - so that one is working.
Nevertheless i am unable to install from 3rd party repository as packages are not fetched from there at all.
/etc/slackpkg/slackpkgplus.conf looks like that
Code:
# Enable (on) / Disable (off) slackpkg+
SLACKPKGPLUS=on
# set to '0' to never show the download progress bar
# set to '1' to show the bar only in download packages (default)
# set to '2' to always show the download bar
# set to '3' for a debug mode
VERBOSE=3
# By default slackpkg+ deny to install 32bit packages.
# Set this flag to 'on' allow slackpkg+ to install 32bit packages on a 64bit slackware
# installation (possibly unsafe). Please, do not install both 32 and 64bit of the same
# package to avoid problems, and NEVER upgrade exitant 64bit packages with relative 32bit package.
# Do not forget to install the multilibs.
ALLOW32BIT=off
# Enable (1) / Disable (0) the official slackpkg blacklist. May be useful to temporarily skip
# the slackware blacklist. You can also override it from command line:
# 'USEBL=0 slackpkg upgrade-all'
USEBL=1
# Add custom option to 'wget'.
# You can solve the repository indisponibility issue by set a timeout here
WGETOPTS="--timeout=15 --tries=1"
# Enable (on) / Disable (off) notification events (see notifymsg.conf)
#ENABLENOTIFY=off
# Enable (on) / Disable (off) the greylist feature. See /etc/slackpkg/greylist
GREYLIST=on
# If two or more repositories contains some same packages, you can specify
# from which repository you prefer to search it.
# The syntax is "<repository_name>:<package_name>"
# Accepts regular expressions. To give priority to an entire repository use "<repository_name>:.*"
# Examples:
#PKGS_PRIORITY=( restricted:vlc )
#PKGS_PRIORITY=( myrepo:.* )
#
# If you want a multilib system, uncomment the multilib repository and set:
#PKGS_PRIORITY=( multilib:.* )
#
PKGS_PRIORITY=( alienbob:.* )
# (Use /usr/doc/slackpkg+-*/setupmultilib.sh to setup a multilib configuration)
# List repositories you want to use (defined below)
# remember to launch 'slackpkg update' if you modify that row.
#REPOPLUS=( multilib slackpkgplus restricted alienbob slacky )
REPOPLUS=( alienbob )
# Define mirrors (uncomment one or more mirror; remember to add it to REPOPLUS)
# Note: only multilib,alienbob,restricted,slacky repositories support GPG. If you add others
# you may need to disable gpg check in slackpkg.conf
# Slackware 15.0 - x86_64
#MIRRORPLUS['multilib']=http://taper.alienbase.nl/mirrors/people/alien/multilib/14.1/
MIRRORPLUS['alienbob']=https://slackware.uk/people/alien/sbrepos/15.0/x86_64/
#MIRRORPLUS['restricted']=https://slackware.nl/people/alien/restricted_sbrepos/15.0/x86_64/
#MIRRORPLUS['slacky']=http://repository.slacky.eu/slackware64-14.1/
#MIRRORPLUS['salix']=http://download.salixos.org/x86_64/15.0/
# use this to keep the slackpkg+ package updated
#MIRRORPLUS['slackpkgplus']=https://slackware.nl/slackpkgplus15/
# Slackware current - x86_64
#MIRRORPLUS['multilib']=http://taper.alienbase.nl/mirrors/people/alien/multilib/current/
#MIRRORPLUS['zerouno']=http://www.z01.eu/repo-slack/slackware64-current/
# Local repository:
#MIRRORPLUS['alienbob']=file://repositories/alien/sbrepos/14.1/x86/
#
# Local packages (you do not need metadata nor 'slackpkg update' command):
#MIRRORPLUS['myrepo']=dir://repositories/mypackages/
#
# Supported Repositories (see /usr/doc/slackpkg+-* for details):
#
#Supports GPG
#slackpkgplus: https://slackware.nl/slakfinder
#multilib: http://taper.alienbase.nl/mirrors/people/alien/multilib/{13.37,14.0,14.1,current}/
#alienbob: http://taper.alienbase.nl/mirrors/people/alien/sbrepos/{13.37,14.0,14.1,current}/{x86,x86_64}/
#ktown: http://taper.alienbase.nl/mirrors/alien-kde/{13.37,14.0,14.1,current}/latest/{x86,x86_64}/
#restricted: http://taper.alienbase.nl/mirrors/people/alien/restricted_sbrepos/{13.37,14.0,14.1,current}/{x86,x86_64}/
#slacky: http://repository.slacky.eu/slackware{,64}-{13.37,14.0,14.1}/
#mled: http://www.microlinux.fr/slackware/MLED-{14.0,14.1}-{32,64}bit/
#mles: http://www.microlinux.fr/slackware/MLES-{14.0,14.1}-{32,64}bit/
#msb: http://slackware.org.uk/msb/{14.0,14.1}/1.6/{x86,x86_64}/
#slackers: http://www.slackers.it/repository/
#slacke17: http://ngc891.blogdns.net/pub/slacke17/slackware{,64,arm}-{14.0,14.1}/
#studioware: http://studioware.org/files/packages/slackware{,64}-{13.37,14.0,14.1}/
#
#Does NOT support GPG
#salixos(*): http://download.salixos.org/{i486,x86_64}/{13.37,14.0,14.1}/
#salixext: http://people.salixos.org/ralvex/repository/x86_64/{14.0,14.1}/
#rlworkman(*): http://rlworkman.net/pkgs/{13.37,14.0,14.1}/
#slackel: http://www.slackel.gr/repo/{i486,x86_64}/current/when i try to do
Code:slackpkg search chromiumi get no results from search
please let me know what is missing in my configuration
i've installed fresh 15.0 64bit. I was aslo able to do a full upgrade of the system with slackpkg - so that one is working.
Nevertheless i am unable to install from 3rd party repository as packages are not fetched from there at all.
/etc/slackpkg/slackpkgplus.conf looks like that
Code:
# Enable (on) / Disable (off) slackpkg+
SLACKPKGPLUS=on
# set to '0' to never show the download progress bar
# set to '1' to show the bar only in download packages (default)
# set to '2' to always show the download bar
# set to '3' for a debug mode
VERBOSE=3
# By default slackpkg+ deny to install 32bit packages.
# Set this flag to 'on' allow slackpkg+ to install 32bit packages on a 64bit slackware
# installation (possibly unsafe). Please, do not install both 32 and 64bit of the same
# package to avoid problems, and NEVER upgrade exitant 64bit packages with relative 32bit package.
# Do not forget to install the multilibs.
ALLOW32BIT=off
# Enable (1) / Disable (0) the official slackpkg blacklist. May be useful to temporarily skip
# the slackware blacklist. You can also override it from command line:
# 'USEBL=0 slackpkg upgrade-all'
USEBL=1
# Add custom option to 'wget'.
# You can solve the repository indisponibility issue by set a timeout here
WGETOPTS="--timeout=15 --tries=1"
# Enable (on) / Disable (off) notification events (see notifymsg.conf)
#ENABLENOTIFY=off
# Enable (on) / Disable (off) the greylist feature. See /etc/slackpkg/greylist
GREYLIST=on
# If two or more repositories contains some same packages, you can specify
# from which repository you prefer to search it.
# The syntax is "<repository_name>:<package_name>"
# Accepts regular expressions. To give priority to an entire repository use "<repository_name>:.*"
# Examples:
#PKGS_PRIORITY=( restricted:vlc )
#PKGS_PRIORITY=( myrepo:.* )
#
# If you want a multilib system, uncomment the multilib repository and set:
#PKGS_PRIORITY=( multilib:.* )
#
PKGS_PRIORITY=( alienbob:.* )
# (Use /usr/doc/slackpkg+-*/setupmultilib.sh to setup a multilib configuration)
# List repositories you want to use (defined below)
# remember to launch 'slackpkg update' if you modify that row.
#REPOPLUS=( multilib slackpkgplus restricted alienbob slacky )
REPOPLUS=( alienbob )
# Define mirrors (uncomment one or more mirror; remember to add it to REPOPLUS)
# Note: only multilib,alienbob,restricted,slacky repositories support GPG. If you add others
# you may need to disable gpg check in slackpkg.conf
# Slackware 15.0 - x86_64
#MIRRORPLUS['multilib']=http://taper.alienbase.nl/mirrors/people/alien/multilib/14.1/
MIRRORPLUS['alienbob']=https://slackware.uk/people/alien/sbrepos/15.0/x86_64/
#MIRRORPLUS['restricted']=https://slackware.nl/people/alien/restricted_sbrepos/15.0/x86_64/
#MIRRORPLUS['slacky']=http://repository.slacky.eu/slackware64-14.1/
#MIRRORPLUS['salix']=http://download.salixos.org/x86_64/15.0/
# use this to keep the slackpkg+ package updated
#MIRRORPLUS['slackpkgplus']=https://slackware.nl/slackpkgplus15/
# Slackware current - x86_64
#MIRRORPLUS['multilib']=http://taper.alienbase.nl/mirrors/people/alien/multilib/current/
#MIRRORPLUS['zerouno']=http://www.z01.eu/repo-slack/slackware64-current/
# Local repository:
#MIRRORPLUS['alienbob']=file://repositories/alien/sbrepos/14.1/x86/
#
# Local packages (you do not need metadata nor 'slackpkg update' command):
#MIRRORPLUS['myrepo']=dir://repositories/mypackages/
#
# Supported Repositories (see /usr/doc/slackpkg+-* for details):
#
#Supports GPG
#slackpkgplus: https://slackware.nl/slakfinder
#multilib: http://taper.alienbase.nl/mirrors/people/alien/multilib/{13.37,14.0,14.1,current}/
#alienbob: http://taper.alienbase.nl/mirrors/people/alien/sbrepos/{13.37,14.0,14.1,current}/{x86,x86_64}/
#ktown: http://taper.alienbase.nl/mirrors/alien-kde/{13.37,14.0,14.1,current}/latest/{x86,x86_64}/
#restricted: http://taper.alienbase.nl/mirrors/people/alien/restricted_sbrepos/{13.37,14.0,14.1,current}/{x86,x86_64}/
#slacky: http://repository.slacky.eu/slackware{,64}-{13.37,14.0,14.1}/
#mled: http://www.microlinux.fr/slackware/MLED-{14.0,14.1}-{32,64}bit/
#mles: http://www.microlinux.fr/slackware/MLES-{14.0,14.1}-{32,64}bit/
#msb: http://slackware.org.uk/msb/{14.0,14.1}/1.6/{x86,x86_64}/
#slackers: http://www.slackers.it/repository/
#slacke17: http://ngc891.blogdns.net/pub/slacke17/slackware{,64,arm}-{14.0,14.1}/
#studioware: http://studioware.org/files/packages/slackware{,64}-{13.37,14.0,14.1}/
#
#Does NOT support GPG
#salixos(*): http://download.salixos.org/{i486,x86_64}/{13.37,14.0,14.1}/
#salixext: http://people.salixos.org/ralvex/repository/x86_64/{14.0,14.1}/
#rlworkman(*): http://rlworkman.net/pkgs/{13.37,14.0,14.1}/
#slackel: http://www.slackel.gr/repo/{i486,x86_64}/current/when i try to do
Code:slackpkg search chromiumi get no results from search
please let me know what is missing in my configuration