Build a Radar Cat Detector

You have a closed box. There may be a live cat inside, but you won't know until you open the box. For most people, this situation is a theoretical conundrum that probes the foundations of quantum mechanics. For me, however, it's a pressing practical problem, not least because physics completely skates over the vital issue of how annoyed the cat will be when the box is opened. But fortunately, engineering comes to the rescue, in the form of a new US $50 maker-friendly pulsed coherent radar sensor from SparkFun.

Perhaps I should back up a little bit. Working from home during the pandemic, my wife and I discovered a colony of feral cats living in the backyards of our block in New York City. We reversed the colony's growth by doing trap-neuter-return (TNR) on as many of its members as we could, and we purchased three Feralvilla outdoor shelters to see our furry neighbors through the harsh New York winters. These roughly cube-shaped insulated shelters allow the cats to enter via an opening in a raised floor. A removable lid on top allows us to replace straw bedding every few months. It's impossible to see inside the shelter without removing the lid, meaning you run the risk of surprising a clawed predator that, just moments before, had been enjoying a quiet snooze.

The enclosure for the radar [left column] is made of basswood (adding cat ears on top is optional). A microcontroller [top row, middle column] processes the results from the radar module [top row, right column] and illuminates the LEDs [right column, second from top] accordingly. A battery and on/off switch [bottom row, left to right] make up the power supply.James Provost

Feral cats respond to humans differently than socialized pet cats do. They see us as threats rather than bumbling servants. Even after years of daily feeding, most of the cats in our block's colony will not let us approach closer than a meter or two, let alone suffer being touched. They have claws that have never seen a clipper. And they don't like being surprised or feeling hemmed in. So I wanted a way to find out if a shelter was occupied before I popped open its lid for maintenance. And that's where radar comes in.

SparkFun's pulsed coherent radar module is based on Acconeer's low-cost A121 sensor. Smaller than a fingernail, the sensor operates at 60 gigahertz, which means its signal can penetrate many common materials. As the signal passes through a material, some of it is reflected back to the sensor, allowing you to determine distances to multiple surfaces with millimeter-level precision. The radar can be put into a presence detector" mode-intended to flag whether or not a human is present-in which it looks for changes in the distance of reflections to identify motion.

As soon as I saw the announcement for SparkFun's module, the wheels began turning. If the radar could detect a human, why not a feline? Sure, I could have solved my is-there-a-cat-in-the-box problem with less sophisticated technology, by, say, putting a pressure sensor inside the shelter. But that would have required a permanent setup complete with weatherproofing, power, and some way of getting data out. Plus I'd have to perform three installations, one for each shelter. For information I needed only once every few months, that seemed a bit much. So I ordered the radar module, along with a $30 IoT RedBoard microcontroller. The RedBoard operates at the same 3.3 volts as the radar and can configure the module and parse its output.

If the radar could detect a human, why not a feline?

Connecting the radar to the RedBoard was a breeze, as they both have Qwiic 4-wire interfaces, which provides power along with an I2C serial connection to peripherals. SparkFun's Arduino libraries and example code let me quickly test the idea's feasibility by connecting the microcontroller to a host computer via USB, and I could view the results from the radar via a serial monitor. Experiments with our indoor cats (two defections from the colony) showed that the motion of their breathing was enough to trigger the presence detector, even when they were sound asleep. Further testing showed the radar could penetrate the wooden walls of the shelters and the insulated lining.

The next step was to make the thing portable. I added a small $11 lithium battery and spliced an on/off switch into its power lead. I hooked up two gumdrop LEDs to the RedBoard's input/output pins and modified SparkFun's sample scripts to illuminate the LEDs based on the output of the presence detector: a green LED for no cat" and red for cat." I built an enclosure out of basswood, mounted the circuit boards and battery, and cut a hole in the back as a window for the radar module. (Side note: Along with tending feral cats, another thing I tried during the pandemic was 3D-printing plastic enclosures for projects. But I discovered that cutting, drilling, and gluing wood was faster, sturdier, and much more forgiving when making one-offs or prototypes.)

The radar sensor sends out 60-gigahertz pulses through the walls and lining of the shelter. As the radar penetrates the layers, some radiation is reflected back to the sensor, which it detects to determine distances. Some materials will reflect the pulse more strongly than others, depending on their electrical permittivity. James Provost

I also modified the scripts to adjust the range over which the presence detector scans. When I hold the detector against the wall of a shelter, it looks only at reflections coming from the space inside that wall and the opposite side, a distance of about 50 centimeters. As all the cats in the colony are adults, they take up enough of a shelter's volume to intersect any such radar beam, as long as I don't place the detector near a corner.

I performed in-shelter tests of the portable detector with one of our indoor cats, bribed with treats to sit in the open box for several seconds at a time. The detector did successfully spot him whenever he was inside, although it is prone to false positives. I will be trying to reduce these errors by adjusting the plethora of available configuration settings for the radar. But in the meantime, false positives are much more desirable than false negatives: A no cat" light means it's definitely safe to open the shelter lid, and my nerves (and the cats') are the better for it.