Article 57CGD 5G in US averages 51Mbps while other countries hit hundreds of megabits

5G in US averages 51Mbps while other countries hit hundreds of megabits

by
Jon Brodkin
from Ars Technica - All content on (#57CGD)
getty-5g-800x450.jpg

Enlarge (credit: Getty Images | zf L)

Average 5G download speeds in the US are 50.9Mbps, a nice step up from average 4G speeds but far behind several countries where 5G speeds are in the 200Mbps to 400Mbps range. These statistics were reported today by OpenSignal, which presented average 5G speeds in 12 countries based on user-initiated speed tests conducted between May 16 and August 14. The US came in last of the 12 countries in 5G speeds, with 10 of the 11 other countries posting 5G speeds that at least doubled those of the US.

The US's average 5G speed is 1.8 times higher than the country's average 4G download speed of 28.9Mbps. User tests in neighboring Canada produced a 4G average of 59.4Mbps and a 5G average of 178.1Mbps. Taiwan and Australia both produced 5G averages above 200Mbps, while South Korea and Saudi Arabia produced the highest 5G speeds at 312.7Mbps and 414.2Mbps, respectively.

In the US, average download speeds for users who accessed 5G at least some of the time was 33.4Mbps-that figure includes both their 4G and 5G experiences. This was the second lowest of the 12 countries surveyed by OpenSignal, with the highest speeds coming in Saudi Arabia (144.5Mbps) and Canada (90.4Mbps). The US fared better in 5G availability, the percentage of time in which users are connected to 5G; the US figure in that statistic is 19.3 percent, fifth best, with Saudi Arabia placing first at 34.4 percent and the UK placing last at 4.5 percent.

Read 8 remaining paragraphs | Comments

index?i=oLvCOSKvcq8:mqYOCiXG7Ck:V_sGLiPB index?i=oLvCOSKvcq8:mqYOCiXG7Ck:F7zBnMyn index?d=qj6IDK7rITs index?d=yIl2AUoC8zA
External Content
Source RSS or Atom Feed
Feed Location http://feeds.arstechnica.com/arstechnica/index
Feed Title Ars Technica - All content
Feed Link https://arstechnica.com/
Reply 0 comments