NSF releases footage from the moment Arecibo’s cables failed
Enlarge / The instrument platform and the cables that until recently supported it, as viewed from the suspended walkway that allowed researchers to service them. (credit: University of Central Florida)
Today, the National Science Foundation released video taken at the moment the Arecibo Radio Observatory's cables failed, allowing its massive instrument platform to crash into the dish below. In describing the videos, the NSF also talked a bit about the monitoring program that had put the cameras in place, ideas it had been pursuing for stabilizing the structure pre-collapse, and prospects for building something new at the site.
A quick recap of the collapse: the Arecibo dish was designed to reflect incoming radio radiation to collectors that hung from a massive, 900-ton instrument package that was suspended above it. The suspension system was supported by three reinforced concrete towers that held cables that were anchored farther from the dish, looped over the towers, and then continued on to the platform itself. Failure of these cables eventually led to the platform dropping into the dish below it.
Let's go to the videoThe video of that collapse comes from a monitoring system put in place in the wake of the cable failures. Due to the danger of further cable breaks, the NSF had instituted no-go zones around each of the three towers that supported the cables. With no personnel allowed to get close enough to inspect the cables, the staff started monitoring them using daily drone flights, one of which was in progress during the collapse. In addition, a video camera was installed on top of the visitor's center, which had a clear view of the instrument platform and one of the support towers.
Read 8 remaining paragraphs | Comments