Refurbishing a Cobalt RaQ 2

Cobalt Networks were one of the early pioneers in network appliance hardware and produced some of the first turn-key webserver boxes you could buy, founded in 1996 as Cobalt Microserver. Cobalt boxes are immediately identifiable from their distinctive deep blue plastic bezels starting with the 1998 Cobalt Qube 2700. The Qube used a 150MHz QED RM5230; these CPUs are part of QED's R5000 family and we'll talk about their architecture a bit later. They came with 2.1GB hard disks with later larger options, 10Mbit Ethernet, 16MB of RAM standard with up to 256MB supported, and a console" consisting of a backlit rear-mounted 2-line LCD and control buttons (on later machines, but not the original 2700, a serial port provided an actual console if you held down a button during startup). A fair number of typical configuration tasks such as setting its IP address could be done directly from the panel and the rest were intended to be done through its Perl-based web console. They were designed to run Linux from the ground up and shipped with Red Hat using a 2.0.x kernel.

Cobalt's network appliances were so exotic back in the day, and once they started hitting the used market, I almost pulled the trigger quite a few times. These days, they're harder to come by, and their use is, of course, inherently limited now, but that doesn't make them any less eye-catching.