Article 6A4E7 This Tiny Chip is Being Used to Develop a Tooth-mounted Sensor That Can Read Your Spit

This Tiny Chip is Being Used to Develop a Tooth-mounted Sensor That Can Read Your Spit

by
hubie
from SoylentNews on (#6A4E7)

upstart writes:

Silicon Labs is hoping more device makers will follow suit and use their teeny xG27 SoC to make medical and wearable devices:

Miniaturizing tech is a perpetual challenge for wearable makers. The smaller the device, the better it is for wearability. The thing is, that usually comes at the expense of battery life. However, Silicon Labs is hoping its latest xG27 chipset is small and energy-efficient enough to spark some big ideas in the medical tech space - like a saliva reader that's so tiny it can be mounted onto a tooth.

According to Silicon Labs, the xG27 family of SoCs consists of the BG27 and the MG27. Both are built around the ARM Cortex M33 processor, but the BG27 focuses on Bluetooth, while the MG27 supports Zigbee and other protocols. As for how small these chips are, the xG27 SoCs range from 2mm-squared to 5mm-squared - roughly the width of a No. 2 pencil's lead tip to the width of the pencil itself. It's not the world's smallest Bluetooth chip, but Silicon Labs spokesperson Sam Ponedal tells The Verge that's only by "fractions of a millimeter."

This is neat from a technical perspective, but what's cooler is the BG27 is currently being used to develop an actual product - the aforementioned tooth-mounted wearable sensor. Lura Health, a medical device maker, says it's using the chip for its "salivary diagnostic sensor." The sensor is small enough to be glued to a molar (or placed inside a "smart retainer") with the intent of continually monitoring a patient's saliva. That, in turn, would allow dentists and clinicians to potentially test for more than 1,000 health conditions.

[...] As for other use cases, Silicon Labs says its chips are good candidates for medical patches, continuous glucose monitors, and wearable EKGs. That's because they can operate on as low as 0.8 volts and can switch to a "shelf mode" that reduces energy use during transportation and while stored on shelves. These features aren't quite as appealing in consumer wearables, but it opens the door for greater wearable use in hospitals and clinical settings.

Original Submission

Read more of this story at SoylentNews.

External Content
Source RSS or Atom Feed
Feed Location https://soylentnews.org/index.rss
Feed Title SoylentNews
Feed Link https://soylentnews.org/
Feed Copyright Copyright 2014, SoylentNews
Reply 0 comments