Audio-Technica adapted its popular M50x headphones into headsets

At CES, Audio-Technica unveiled new StreamSet wired headsets that it designed with content creators in mind. Based on the popular M50x headphones, the M50xSTS comes in two flavors. One model has 3.5mm aux and XLR connectivity. The other has a USB cable that enables some extra features, but the two versions are otherwise very similar.

You'll get the same 45mm large-aperture drivers with rare earth magnets and copper-clad aluminum wire voice coils that are present in the M50x, along with swappable earpads. The M50x earpads are focused on audio quality and sound isolation, while the mesh and leatherette earpads are all about breathability and comfort.

As for the microphone, Audio-Technica adopted a cardioid condenser from its 20 Series models. The mic, which is said to offer studio-level audio quality without background noise, is on a boom arm. Handily, when you flip the boom up, the headset will mute the mic. One advantage that the M50xSTS-USB has over the 3.5mm model is that, thanks to the sidetone circuitry, you'll be able to hear your voice through the headset if you wish. You can adjust that volume with an earcup dial.

The M50xSTS has a two-meter cable with a 3.5mm headphone input and, for the mic, an XLR output that you can connect to an audio interface or mixer. The M50xSTS-USB version has a two-meter cable as well, but with a USB-A connector (you'll get a USB-C adapter too). The latter model also has an analog-to-digital converter with a sampling rate up to 24 bits or 96 kHz. The M50xSTS costs $199, while the M50xSTS-USB will run you $229.