Fiber Card Not Showing Up in OS, but Up in BIOS and Found in lshw
by Led Zappa from LinuxQuestions.org on (#6PAQN)
Hi,
I have a 2 port Fiber card that was added to server and working in RHEL7.9. After rebuild to 8.9 they don't show up in the OS. missing from "ip a" and "lspci | grep Ether" , but are found in BIOS as up and by using lshw as shown below.
lshw:
*-fiber:0 UNCLAIMED
description: Fibre Channel
product: 8200 Series 10GbE Converged Network Adapter (FCoE)
vendor: QLogic Corp.
physical id: 0.6
bus info: pci@0000:83:00.6
version: 58
width: 64 bits
clock: 33MHz
capabilities: msix pm vpd msi pciexpress cap_list
configuration: latency=0
resources: memory:c8200000-c83fffff memory:c8c10000-c8c1ffff
*-fiber:1 UNCLAIMED
description: Fibre Channel
product: 8200 Series 10GbE Converged Network Adapter (FCoE)
vendor: QLogic Corp.
physical id: 0.7
bus info: pci@0000:83:00.7
version: 58
width: 64 bits
clock: 33MHz
capabilities: msix pm vpd msi pciexpress cap_list
configuration: latency=0
resources: memory:c8000000-c81fffff memory:c8c00000-
Not sure where to look next.
I have a 2 port Fiber card that was added to server and working in RHEL7.9. After rebuild to 8.9 they don't show up in the OS. missing from "ip a" and "lspci | grep Ether" , but are found in BIOS as up and by using lshw as shown below.
lshw:
*-fiber:0 UNCLAIMED
description: Fibre Channel
product: 8200 Series 10GbE Converged Network Adapter (FCoE)
vendor: QLogic Corp.
physical id: 0.6
bus info: pci@0000:83:00.6
version: 58
width: 64 bits
clock: 33MHz
capabilities: msix pm vpd msi pciexpress cap_list
configuration: latency=0
resources: memory:c8200000-c83fffff memory:c8c10000-c8c1ffff
*-fiber:1 UNCLAIMED
description: Fibre Channel
product: 8200 Series 10GbE Converged Network Adapter (FCoE)
vendor: QLogic Corp.
physical id: 0.7
bus info: pci@0000:83:00.7
version: 58
width: 64 bits
clock: 33MHz
capabilities: msix pm vpd msi pciexpress cap_list
configuration: latency=0
resources: memory:c8000000-c81fffff memory:c8c00000-
Not sure where to look next.