'Beyond EUV' Chipmaking Tech Pushes Soft X-Ray Lithography Closer to Challenging Hyper-NA EUV
upstart writes:
'Beyond EUV' chipmaking tech pushes Soft X-Ray lithography closer to challenging Hyper-NA EUV:
Researchers at Johns Hopkins University have unveiled a new approach to chipmaking that uses lasers with a 6.5nm ~ 6.7nm wavelength - also known as Soft X-rays - that could increase the resolution of lithography tools to 5nm and below, reports Cosmos, citing a paper published in Nature.
The scientists call their method 'beyond-EUV' - suggesting that their technology could replace industry-standard EUV lithography - but the researchers admit they are currently years away from building even an experimental B-EUV tool.
Soft X-Rays can challenge Hyper-NA. On paper
The most advanced chips nowadays are made using EUV lithography, which operates at a wavelength of 13.5 nm and can produce features as small as 13nm (Low-NA EUV of 0.33 numerical aperture), 8nm (High-NA EUV of 0.55 NA), or even 4nm ~ 5nm (Hyper-NA EUV on 0.7 - 0.75 NA) at the cost of extreme complexity of the lithography systems that have very advanced optics that cost hundreds of millions of dollars.
By using a shorter wavelength, researchers from Johns Hopkins University can get an intrinsic resolution boost even with lenses with moderate NA. However, they face many challenges with B-EUV.
Firstly, BEUV light sources are not yet ready. Various researchers have tried multiple methods of generating 6.7 nm wavelength radiation (e.g., gadolinium laser-produced plasma), but there is no industry-standard approach. Secondly, these shorter wavelengths - due to their high photon energy - interact poorly with traditional photoresist materials used in chipmaking. Thirdly, because 6.5nm ~ 6.7nm wavelength light is absorbed rather than reflected by pretty much everything, multilayer-coated mirrors for this type of radiation haven't been produced before.
Finally, these lithography tools must be designed from scratch, and currently, there is no ecosystem to support the designs with components and consumables. To sum up, building a B-EUV machine (or Soft X-ray machine?) requires breakthroughs in light sources, projection mirrors, resists, and even consumables like pellicles or photomasks.
The team discovered that metals like zinc are able to absorb B-EUV light and emit electrons, which then trigger chemical reactions in organic compounds called imidazoles. These reactions make it possible to etch very fine patterns onto semiconductor wafers.
Interestingly, while zinc performs poorly with traditional 13.5nm EUV light, it becomes highly effective at shorter wavelengths, highlighting how important it is to match the material with the right wavelength.
To apply these metal-organic compounds to silicon wafers, the researchers developed a technique called chemical liquid deposition (CLD). This method creates thin, mirror-like layers of a material called aZIF (amorphous zeolitic imidazolate frameworks), growing at a rate of 1nm per second. CLD also allows for fast testing of different metal-imidazole combinations, making it easier to discover the best pairings for different lithography wavelengths. While zinc is well suited for B-EUV, the team noted that other metals might perform better at different wavelengths, offering flexibility for future chipmaking technologies.
This approach gives manufacturers a toolbox of at least 10 metal elements and hundreds of organic ligands to create custom resists tailored to specific lithography platforms, the researchers disclosed.
Although the researchers did not solve the full stack of B-EUV challenges (e.g., source power, masks), they advanced one of the most critical bottlenecks: finding resist materials that can work with 6nm wavelength light. They created the CLD process to apply thin, uniform films of amorphous zeolitic imidazolate frameworks (aZIFs) onto silicon wafers. They experimentally showed that certain metals (like zinc) can absorb Soft X-ray light and emit electrons that trigger chemical reactions in imidazole-based resists.
There are plenty of challenges to be solved with B-EUV, and the technology doesn't have a clear path to the mass market. However, the CLD process can be used pretty widely, both in semiconductor and non-semiconductor applications.
Journal: Spin-on deposition of amorphous zeolitic imidazolate framework films for lithography applications by Yurun Miao, Shunyi Zheng, Kayley E. Waltz, Mueed Ahmad, Xinpei Zhou, Yegui Zhou, Heting Wang, et al.
Read more of this story at SoylentNews.