Feed linuxquestionsorg LinuxQuestions.org

Favorite IconLinuxQuestions.org

Link https://www.linuxquestions.org/questions/
Feed https://feeds.feedburner.com/linuxquestions/latest
Updated 2025-06-15 07:45
linux old buildroot : bluetooth connection from shell
Hi there. I have an old enough buildroot tree with a relatively new kernel. All packages inside are old enough. For example, bluez5-utils is 0f 5.21 (this is dictated by my toolchain). I have...
Parsing Errors when upgrading .
Hello, I am John Tankersley and I am inquiring for help concerning upgrading from Ubuntu 19.0 to 20.0 version. I am having parsing errors when I attempt this. /etc/update-manager/release-upgrades...
Just wanted to say hello
I am a newbee but i have been trying out ubuntu since the 1990's but never got the grasp of it . Now that i have had some experience I am looking forward to installing it as a pvr option as well as a...
yast2 without gui
I am using openSUSE Leap VERSION="15.1" By default yast2 version 4.1.75-lp151.2.16.1 is installed. Calling "yast2" starts without GUI. This is a new problem. Unfortunately, I cannot remember...
How to make a USB thumb drive boot and retain your work.
I hope this is the right stop to write this. You may delete it. This worked on Parrot and Kali 2019, could not make it work on Kali 2020. If you have to use sudo, I did this sudo -i bash, that...
vim settings
I am trying to do something that seems like it should be simple. By default I want to 'set noexpandtab'. When I create .vim/vimrc and add that single line it seems to turn off all defaults so I get...
LXer: Inkscape 1.0 Is Here as a Massive Release After Three Years in the Making
Published at LXer: More than three years in the making, the Inkscape 1.0 release of the best free and open-source vector graphics editor software is finally here and it’s a massive update. Read...
Bodhi en Spotify
How do I play (free) Spotify on my Bohdi 5 laptop? It's only works wih a "Premium- account or???
upgrade from Xubuntu 19.10 incomplete
I used sudo do-release-upgrade -d to update xubuntu 19.10 to 20.04. The installation was completed. After this a terminal command lsb_release -a showed that my system was ubuntu 20.04. Unfortunately...
LXer: Vulkan 1.2.140 spec out and NVIDIA has a new Vulkan Beta Driver up with new extension support
Published at LXer: Two bits of Vulkan related news to share today. Recently the Vulkan specification was bumped again with new extension and today a new NVIDIA Vulkan Beta Driver went up. Read...
[SOLVED] Emacs gnus how to set message-forward-included-headers?
Hello, folks. Default emacs gnus behavior when forwarding a message is quiet strange. Forwarded message contains a lot on unnecessary headers. I'd like to keep only essential headers. From emacs...
LXer: This Week in Linux 102: Inkscape 1.0, Fedora 32, Ubuntu Flavours, Pop!_OS, Red Hat, openSUSE & More
Published at LXer: On this episode of This Week in Linux, we’ve got news from Fedora, PopOS, Red Hat, openSUSE, and a follow up for the Ubuntu 20.04 release. There are 7 Ubuntu Flavours and all of...
How to install Mint to USB boot ?
Hi there, I've been using USB flash boot for long time, I simply install to hard drive the normal way, and then put it in the USB enclosure and it will boot normally, just now I installed the...
Issue with rsync command (error: 23)
I am trying to compare between two folders mapped to my Windows 10 machine and write the difference to a third external drive connected to the laptop. Below are the details: - I am having a large...
LXer: How to Delete Group in Linux
Published at LXer: In Linux, groups are used to organize and administer user accounts. The primary purpose of groups is to define a set of privileges such as reading, writing, or executing...
LXer: Spellchecking scientific names on the command line
Published at LXer: In a table with thousands of scientific names like "Stropharia rugosoannulata var. rugosoannulata Farl. ex Murrill, 1922", are all the Latin bits correctly spelled? This post...
LXer: KDE Plasma 5.18.5 Desktop Released with More Than 60 Changes
Published at LXer: The KDE Project released the KDE Plasma 5.18.5 bugfix update to make the latest Plasma 5.18 LTS desktop environment series more stable and reliable. Read More......
What kind of DNS server should I make?
Hello All, I have created a virtual lab environment to practice Linux. This includes 1. Local LAN (192.168.1.0/24, Zone: cntnix.lan) 2. KVM LAN (192.168.122.0/24, Zone: kvmlab.lan) I have...
Strategy to get the analysis between mainline linux kernel and soc modified kernel
Hi all, What is the best strategy to compare the mainline Linux kernel and soc modified Linux kernel? I would like to get the list of changes done by the SOC and analysis of the changes. ...
PulseAudio sound server resets system volume to 100%
Mint 18.1, PA sound server 8.0. An old, old complaint with lots of different fixes (even patched releases) that still don't seem to work for lots of folks. System vol & "output module" volume...
LXer: 8 open source video games to play
Published at LXer: Video games are a big business. That's great for the industry's longevity—not to mention for all the people working in programming and graphics. But it can take a lot of work,...
LXer: Just another KVM setup on Deepin 20 Beta
Published at LXer: I've made installation on bare metal and have to notice that after system reboot during major system load obtained several times "Tainted warning" from 5.3 kernel and...
LXer: At Command in Linux
Published at LXer: at is a command-line utility that allows you to schedule commands to be executed at a particular time. Jobs created with at are executed only once. Read More......
Wifi hotspot auto start
Hi there, I am running LMDE 2 and want to setup wifi hotspot so that it will auto start on boot, now I have to manually create the hotspot everytime, although the setting is saved but it won't...
LXer: Analyzing data science code with R and Emacs
Published at LXer: Way back in 2012, Harvard Business Review published an article that proclaimed "data scientist" to be the sexiest job of the 21st century. Interest in data science has exploded...
LXer: Control Screen Brightness using Terminal on CentOS 8
Published at LXer: In this article, I will show you how you can adjust the brightness of your screen with the pre-installed xrandr utility on CentOS 8. Read More......
fgfs
Question about FlightGear (Fgfs). When I start, it says loading scenery but never finishes. Where do I search for help with this game? Host: rich-OptiPlex-990 Kernel: 5.3.0-51-generic x86_64 bits: 64...
LXer: How to Install MySQL on Ubuntu 20.04
Published at LXer: MySQL is the most popular open-source relational database management system. It is fast, easy to use, and an integral part of the popular LAMP and LEMP stacks. Read More......
Fedora 32 and OpenVPN: What is the proper configuration?
Greetings! I'm trying to setup OpenVPN on a freshly built Fedora 32 server. I'm using the installation tutorial located here...
LXer: Configuring Unbound as a simple forwarding DNS server
Published at LXer: If you need to set up a simple DNS service in Linux, try Unbound. Read More... (https://www.redhat.com/sysadmin/forwarding-dns-2)
Fedora 32 and OpenVPN: What is the proper configuration?
Greetings! I'm trying to setup OpenVPN on a freshly built Fedora 32 server. I'm using the installation tutorial located here...
Hello everyone!
I'm very stupid so I need to ask others on a public forum to prevent me from thinking hard and actually doing work! Pweasy pwease help with my questions for I am very dumb
sources of information about Virtualization
hey guys, i'd like to get very easy to understand sources of information about what basicly is Virtualization and the things i sohould know about it as a novice to the linux world please youtube...
LXer: Setting up Unison File Synchronization between two Servers on Debian 10 (Buster)
Published at LXer: This tutorial shows how to set up file synchronization between two Debian 10 servers with Unison. Unison is a file-synchronization tool similar to rsync, the big difference is...
Can't boot up original host OS after installing and booting up LFS
Hello! I just finished the LFS book and was able to boot up the system successfully, however I can no longer boot up my host OS which I need to fix my broken GRUB config file. Is there any way I...
mouse pointer (aka "cutsor") keeps on moving for no aperent reason
hey everybody, i have this pecolior problem, i have a old laptop i revived couple of days ago, i installed mx linux on it, before mx i had a few different distros on it and i had the same problem...
LXer: After More Than 3 Years, Inkscape 1.0 is Finally Here With Tons of Feature Improvements
Published at LXer: The best free and open source vector editor Inkscape just became better with the release of version 1.0. Check out the new features and installation instruction. Read More......
how do i install internet explorer on mx linux?
hey guys, so i'm trying to install internet explorer on my newly installed mx linux and so far i havn't been able to, the reason i care about IE is because there is this website which will not open...
KDE spectacle keybindings stop working on Fedora 32
Hello, I experience weird issue with Spectacle app using KDE on Fedora 32. After fresh install, I can use default key bindings to take screenshots of active window or an area such as meta+printsc,...
LXer: How to setup Apache Tomcat cluster with 3 Nodes on Ubuntu
Published at LXer: In this article, we will see how to set up a cluster of Apache Tomcat servers. We will be using 3 Ubuntu 18.04 EC2 Instances or VMs, here I have used EC2 instances. We will also...
Building Firefox form source code in Slackware
Hi, I have Slackware 14.2. I want build from source code firefox 76.0. Original version in Slackware is 68.7.0esr. this is the first attempt about build Firefox. I started by reading this...
send mail using postfix server using a http_proxy server
i have installed a postfix server where it has internet connectivity thru http_proxy. i know having a direct internet connection will work.. but in my case the server is using prxoy to reach internet,...
Installing from tarball - "make" isn't working
Trying to install from a tarball, got right to the end of the instructions and got stumped. (Huge newbie with tarballs, but this app - goggles music manager v.1.2.1 - doesn't appear to be available...
LXer: Manjaro Linux and Star Labs team up for their Linux-focused hardware
Published at LXer: Star Labs, a small Linux vendor from the UK has teamed up with Manjaro Linux to offer Manjaro as an option on their custom Linux laptops. Read More......
Having a problem understanding sudo and setting environmental variables
Hello, I'm having difficulty understanding sudo and environmental variables. I'm currently setting up vagrant on a host so I can play with adding and removing linux VMs and try and learn Linux...
PHP variable not 'sticking'
Hi everyone, I am trying to create a mana calculator for an RPG. The user enters the mana cost of a spell and it gets deducted from the user's total mana. The program is working, except it only...
Trouble enabling Firefox MP3 playback in RHEL/CentOS 8
Hello, I have an RHEL 8.2 system with Firefox 68.7.0 and a major multimedia format that can't be played on it is MP3. I confirmed this by going to the HTML5 Audio Formats Test page...
LXer: Monitor And Administer Linux Servers Using Cockpit Via Web Browser
Published at LXer: Cockpit is a free, open source, server administration tool that allows you to easily monitor and administer Linux servers via a web browser. Read More......
Loop Mounting
Something a little funny here. Loop mounting has ceased to function Code: --------- bash-5.0$ ifconfig lo lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 ...
Cannot Detect/Connect Wifi KDE Plasma
Hello and thanks in advance for your patience and assistance. After spending an embarrassing amount of time getting my RealTek usb device to seemingly work on my Tumbleweed/KDE Plasma setup, I am...
...758759760761762763764765766767...